Table 1 Parameters of torus with different flatness ratios
From: Performance Analysis and Improvement of Flat Torque Converters Using DOE Method
Parameters | Type 1 | Type 2 | Type 3 | Type 4 |
|---|---|---|---|---|
Nominal diameter D (mm) | 250 | 250 | 250 | 250 |
Width of torus W (mm) | 51 | 46.40 | 42.95 | 39.53 |
Flatness ratio \(e_{0}\) | 0.204 | 0.186 | 0.172 | 0.158 |
Redefined flatness ratio \(e\) | 1.0 | 0.9 | 0.8 | 0.7 |