Chinese Journal of Mechanical Engineering

Table 3 Single-factor cutting test parameters table

From: Study on Cutting Force, Cutting Temperature and Machining Residual Stress in Precision Turning of Pure Iron with Different Grain Sizes

Feed (mm/r)	Speed of cut (m/min)	Depth of cut (mm)
0.02	160	0.01, 0.03, 0.05, 0.07, 0.09
0.01, 0.02, 0.03, 0.04, 0.05	120	0.04
0.05	80, 120, 160, 200, 240	0.04

Back to article page