Skip to main content

Table 2. Experimental results of average contact force of the workpiece at v = 100 r/min at different positions F(N)

From: Amending Research on the Expression of the Contact Force of the Spindle Barrel Finishing Based on EDEM Simulation

Z (mm) x (mm)
40 55 70 85
55 2.3562 3.5821 4.9652 6.0252
70 1.9642 2.9831 4.5137 5.5480
85 1.5623 2.3584 3.5157 4.2871
100 0.9440 1.3313 3.2175 3.0707
115 0.4824 0.9990 1.6628 3.0381