Skip to main content

Table 9. Calculation results of the average contact force of workpiece at different positions at v = 60 r/min F(N)

From: Amending Research on the Expression of the Contact Force of the Spindle Barrel Finishing Based on EDEM Simulation

z (mm) x (mm)
40 55 70 85
55 2.5023 3.5240 5.0385 5.3648
70 2.0519 2.9296 4.0565 4.9460
85 1.5754 2.2721 3.2023 4.0615
100 1.0016 1.6488 2.3406 3.0352
115 0.7766 0.9592 1.3118 1.7089