Skip to main content

Table 4 Research literatures on cutting thickness of aerospace aluminum alloy

From: Milling Force Model for Aviation Aluminum Alloy: Academic Insight and Perspective Analysis

Year Conventional end milling Micro milling Thin-wall workpiece curved-surfaces
1961 Milling parameters [121]    
1981 Feed speed [125]    
1994     Tool parameters [142]
1996 Feed speed [46]    
1998     Tool parameters [143]
2000 Tool path [126] Tool runout [131]   
2001 Structural vibrations [47]    
2006   Elastic recovery [134]   
2007 Feed rate [48] Tool runout [132]   
2008    Cutter/workpiece deflections [141]  
2009 Feed; penetration angle [127] Elastic recovery [133]   Tool runout [117]
2010 Tool path [49]    
2013   Tool runout; size effect [135]   
2014     Tool runout [145]
2015 Angular position; tool runout [128]    Tool vibrations and runout [147]
2016   Tool deflection [130, 137]   Tilt and lead angles [148]
2017 Tool path [129]    
2018     
2019   Cutting edge radius [140]   
2020   Tool runout; elastic recovery [72]   
\