Table 4 Parameters for the UAVM and CM
No. | Spindle rotation speed (r/min) | Feed rate (mm/min) | Depth of cut (mm) | Milling distance (mm) | Amplitude of UAVM (μm) | Lubrication method |
|---|---|---|---|---|---|---|
1 | 1200 | 36 | 0.3 | 10 | 4 (UAVM)/0 (CM) | Flood cooling |
2 | 48 | |||||
3 | 60 | |||||
4 | 72 |
No. | Spindle rotation speed (r/min) | Feed rate (mm/min) | Depth of cut (mm) | Milling distance (mm) | Amplitude of UAVM (μm) | Lubrication method |
|---|---|---|---|---|---|---|
1 | 1200 | 36 | 0.3 | 10 | 4 (UAVM)/0 (CM) | Flood cooling |
2 | 48 | |||||
3 | 60 | |||||
4 | 72 |