Page 1 of 7
Inconel 718 (IN718) alloy is widely applied to fabricate high temperature resistant or corrosion resistant parts due to its excellent mechanical performance. However, the machining of IN718 alloy is difficult ...
The Chinese express delivery industry processes nearly 110 billion items in 2022, averaging an annual growth rate of 200%. Among the various types of sorting systems used for handling express items, cross-belt...
The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer, which is beneficial to shape and property control in wire arc additive manufacturing. In this paper, with the wir...
Each joint of a hydraulic-driven legged robot adopts a highly integrated hydraulic drive unit (HDU), which features a high power–weight ratio. However, most HDUs are throttling-valve-controlled cylinder system...
Minimum quantity Lubrication (MQL) is a sustainable lubrication system that is famous in many machining systems. It involve the spray of an infinitesimal amount of mist-like lubricants during machining process...
Improvement of fabrication efficiency and part performance was the main challenge for the large-scale powder bed fusion (PBF) process. In this study, a dynamic monitoring and feedback system of powder bed temp...
This paper proposes a modified iterative learning control (MILC) periodical feedback-feedforward algorithm to reduce the vibration of a rotor caused by coupled unbalance and parallel misalignment. The control ...
The human digital twin (HDT) emerges as a promising human-centric technology in Industry 5.0, but challenges remain in human modeling and simulation. Digital human modeling (DHM) provides solutions for modelin...
On-site and real-time non-destructive measurement of elastic constants for materials of a component in a in-service structure is a challenge due to structural complexities, such as ambiguous boundary, variable...
Blank holder force (BHF) is a crucial parameter in deep drawing, having close relation with the forming quality of sheet metal. However, there are different BHFs maintaining the best forming effect in differen...
Predictive maintenance has emerged as an effective tool for curbing maintenance costs, yet prevailing research predominantly concentrates on the abnormal phases. Within the ostensibly stable healthy phase, the...
The current research of Charpy impact mainly focuses on obtaining the ductile brittle transition temperature of materials by experiments. Compared with experiments, numerical simulation can study many problems...
There are lots of researches on fixture layout optimization for large thin-walled parts. Current researches focus on the positioning problem, i.e., optimizing the positions of a constant number of fixtures. Ho...
Mining shovel is a crucial piece of equipment for high-efficiency production in open-pit mining and stands as one of the largest energy consumption sources in mining. However, substantial energy waste occurs d...
The application of continuous natural fibers as reinforcement in composite thin-walled structures offers a feasible approach to achieve light weight and high strength while remaining environmentally friendly. ...
The significance of liquids in abrasive wire sawing has been demonstrated in several studies. However, the performance of its spreading behavior is limited by the current development trend, where the wafer has...
Mechanical agitation in baffled vessels with turbines plays a vital role in achieving homogeneous fluid mixing and promoting various transfer operations. Therefore, designing vessels with optimal energy effici...
Magnetically coupled rodless cylinders are widely used in the coordinate positioning of mechanical arms, electrostatic paintings, and other industrial applications. However, they exhibit strong nonlinear chara...
Shell-infill structures comprise an exterior solid shell and an interior lattice infill, whose closed features yield superior comprehensive mechanical performance and light weight. Additive manufacturing (AM) ...
The vibration signals of rotating machinery usually contain various natural oscillation modes, exhibiting multi-scale features. This paper proposes a Multi-Branch one-dimensional deep Convolutional Neural Netw...
Three-dimensional (3D) printing technology is expected to solve the organ shortage problem. However, owing to the accuracy limitations, it is difficult for the current bioprinting technology to achieve an accu...
The existence of the relative radial and axial movements of a revolute joint’s journal and bearing is widely known. The three-dimensional (3D) revolute joint model considers relative radial and axial clearance...
In recent years, as a promising way to realize digital transformation, digital twin shop-floor (DTS) plays an important role in smart manufacturing. The core feature of DTS is the synchronization. How to imple...
The equipment used in various fields contains an increasing number of parts with curved surfaces of increasing size. Five-axis computer numerical control (CNC) milling is the main parts machining method, while...
Owing to the popularization of coating technology, physical Vapor Deposition (PVD) coated tools have become indispensable in the cutting process. Additionally, the post-treatment of coated tools applied to ind...
In theoretical research pertaining to sealing, a contact model must be used to obtain the leakage channel. However, for elastoplastic contact, current numerical methods require a long calculation time. Hyperel...
Micro-grinding with a spherical grinding head has been deemed an indispensable method in high-risk surgeries, such as neurosurgery and spine surgery, where bone grinding has long been plagued by the technical ...
Shield machines are currently the main tool for underground tunnel construction. Due to the complexity and variability of the underground construction environment, it is necessary to accurately identify the gr...
Ultrasonic testing (UT) is increasingly combined with machine learning (ML) techniques for intelligently identifying damage. Extracting significant features from UT data is essential for efficient defect chara...
With the increasing attention to the state and role of people in intelligent manufacturing, there is a strong demand for human-cyber-physical systems (HCPS) that focus on human-robot interaction. The existing ...
The service cycle and dynamic performance of structural parts are affected by the weld grinding accuracy and surface consistency. Because of reasons such as assembly errors and thermal deformation, the actual ...
To satisfy the requirements for the precise formation of large-scale high-performance lightweight components with inner ring reinforcement, a new multidirectional loading rotary extrusion forming technology is...
Nonlinear friction is a dominant factor affecting the control accuracy of CNC machine tools. This paper proposes a friction pre-compensation method for CNC machine tools through constructing a nonlinear model ...
The low density and high corrosion resistance of titanium alloy make it a material with various applications in the aerospace industry. However, because of its high specific strength and poor thermal conductiv...
Fast and accurate measurement of the volume of earthmoving materials is of great significance for the real-time evaluation of loader operation efficiency and the realization of autonomous operation. Existing m...
The ability to predict a grinding force is important to control, monitor, and optimize the grinding process. Few theoretical models were developed to predict grinding forces when a structured wheel was used in...
Improved energy utilisation, precision, and quality are critical in the current trend of low-carbon green manufacturing. In this study, three abrasive belts were prepared at various wear stages and characteris...
In order to solve the problem of weak stiffness of the existing fully decoupled parallel mechanism, a new synthesis method of fully decoupled three translational (3T) parallel mechanisms (PMs) with closed-loop...
Single-crystal silicon carbide (SiC) has been widely applied in the military and civil fields because of its excellent physical and chemical properties. However, as is typical in hard-to-machine materials, the...
Additive manufacturing (AM) technology such as selective laser melting (SLM) often produces a high reflection phenomenon that makes defect detection and information extraction challenging. Meanwhile, it is ess...
As an important green manufacturing process, dry grinding has problems such as high grinding temperature and insufficient cooling capacity. Aiming at the problems of sticking and burns in dry grinding of titan...
To address the problem of conventional approaches for mechanical property determination requiring destructive sampling, which may be unsuitable for in-service structures, the authors proposed a method for dete...
Polyoxymethylene methacrylate (PMMA) is widely used in ophthalmic biomaterials. Misuse of PMMA in extreme environments is likely to damage the ocular surface and intraocular structures. The surface characteriz...
With the combination of 3D printing and electroplating technique, metal-coated resin lattice is a viable way to achieve lightweight design with desirable responses. However, due to high structural complexity, ...
The Ultrasonic cavitation effect has been widely used in mechanical engineering, chemical engineering, biomedicine, and many other fields. The quantitative characterization of ultrasonic cavitation intensity h...
Variational mode decomposition (VMD) is a suitable tool for processing cavitation-induced vibration signals and is greatly affected by two parameters: the decomposed number K and penalty factor α under strong noi...
In pressurized water reactor (PWR), fretting wear is one of the main causes of fuel assembly failure. Moreover, the operation condition of cladding is complex and harsh. A unique fretting damage test equipment...
The semi-blind deconvolution algorithm improves the separation accuracy by introducing reference information. However, the separation performance depends largely on the construction of reference signals. To im...
Cerium–lanthanum alloy is widely used in the green energy industry, and the nanoscale smooth surface of this material is in demand. Nanometric cutting is an effective approach to achieving the ultra-precision ...
Gear power-honing is mainly applied to finish small and medium-sized automotive gears, especially in new energy vehicles. The distinctive curved surface texture greatly improves the noise emission and service ...
