Skip to main content

Articles

Page 12 of 13

  1. Optical membrane mirrors are promising key components for future space telescopes. Due to their ultra-thin and high flexible properties, the surfaces of these membrane mirrors are susceptible to temperature va...

    Authors: Yi-Fan Lu, Hong-Hao Yue, Zong-Quan Deng and Horn-Sen Tzou
    Citation: Chinese Journal of Mechanical Engineering 2018 31:9
  2. Ultra-precision machine tool is the most important physical tool to machining the workpiece with the frequency domain error requirement, in the design process of which the dynamic accuracy design (DAD) is indi...

    Authors: Guo-Da Chen, Ya-Zhou Sun, Fei-Hu Zhang, Li-Hua Lu, Wan-Qun Chen and Nan Yu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:8
  3. Online assessment of remaining useful life (RUL) of a system or device has been widely studied for performance reliability, production safety, system conditional maintenance, and decision in remanufacturing en...

    Authors: Ya-Wei Hu, Hong-Chao Zhang, Shu-Jie Liu and Hui-Tian Lu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:5
  4. During the condition monitoring of a planetary gearbox, features are extracted from raw data for a fault diagnosis. However, different features have different sensitivity for identifying different fault types,...

    Authors: Li-Ming Wang and Yi-Min Shao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:4
  5. Drilling and coring, as effective ways to obtain lunar regolith along the longitudinal direction, are widely applied in the lunar sampling field. Conventionally, modeling of drill-soil interaction was divided ...

    Authors: Qi-Quan Quan, Chong-Bin Chen, Zong-Quan Deng, Jun-Yue Tang and De-Wei Tang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:20
  6. Underwater vehicles are being emphasized as highly integrated and intelligent devices for a significant number of oceanic operations. However, their precise operation is usually hindered by disturbances from a...

    Authors: Hai Huang, Guo-Cheng Zhang, Ji-Yong Li, Qiang Zhang, Jin-Yu Xu and Hong-De Qin
    Citation: Chinese Journal of Mechanical Engineering 2018 31:19
  7. Researchers seldom study the optimum design of a mechanical connector for subsea oil-gas pipeline based upon the sealing performance. An optimal design method of a novel subsea pipeline mechanical connector is...

    Authors: Li-Quan Wang, Zong-Liang Wei, Shao-Ming Yao, Yu Guan and Shao-Kai Li
    Citation: Chinese Journal of Mechanical Engineering 2018 31:18
  8. The formation of hybrid underwater gliders has advantages in sustained ocean observation with high resolution and more adaptation for complicated ocean tasks. However, the current work mostly focused on the tr...

    Authors: Dong-Yang Xue, Zhi-Liang Wu, Yan-Hui Wang and Shu-Xin Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:17
  9. Microlens arrays are the key component in the next generation of 3D imaging system, for it exhibits some good optical properties such as extremely large field of view angles, low aberration and distortion, hig...

    Authors: Wei Yuan, Li-Hua Li, Wing-Bun Lee and Chang-Yuen Chan
    Citation: Chinese Journal of Mechanical Engineering 2018 31:16
  10. Walking robots use leg structures to overcome obstacles or move on complicated terrains. Most robots of current researches are equipped with legs of simple structure. The specific design method of walking robo...

    Authors: Da Xi and Feng Gao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:15
  11. There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two di...

    Authors: Gui-Min Chen and Larry L. Howell
    Citation: Chinese Journal of Mechanical Engineering 2018 31:14
  12. Accelerated life test (ALT) is currently the main method of assessing product reliability rapidly, and the design of efficient test plans is a critical step to ensure that ALTs can assess the product reliabili...

    Authors: Wen-Hua Chen, Liang Gao, Jun Pan, Ping Qian and Qing-Chuan He
    Citation: Chinese Journal of Mechanical Engineering 2018 31:13
  13. Locomotion and manipulation optimization is essential for the performance of tetrahedron-based mobile mechanism. Most of current optimization methods are constrained to the continuous actuated system with limi...

    Authors: Ran Liu, Yan-An Yao, Wan Ding and Xiao-Ping Liu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:11
  14. Polynomial-basis response surface method has some shortcomings for truss structures in structural optimization, concluding the low fitting accuracy and the great computational effort. Based on the theory of ap...

    Authors: Shan Chai, Xiang-Fei Ji, Li-Jun Li and Ming Guo
    Citation: Chinese Journal of Mechanical Engineering 2018 31:1
  15. Induction motors (IMs) are commonly used in various industrial applications. To improve energy consumption efficiency, a reliable IM health condition monitoring system is very useful to detect IM fault at its ...

    Authors: De Z. Li, Wilson Wang and Fathy Ismail
    Citation: Chinese Journal of Mechanical Engineering 2017 30:192
  16. Tooth pitting is a common failure mode of a gearbox. Many researchers investigated dynamic properties of a gearbox with localized pitting damage on a single gear tooth. The dynamic properties of a gearbox with...

    Authors: Xi-Hui Liang, Zhi-Liang Liu, Jun Pan and Ming Jian Zuo
    Citation: Chinese Journal of Mechanical Engineering 2017 30:196
  17. The demand for large antennas in future space missions has increasingly stimulated the development of deployable membrane antenna structures owing to their light weight and small stowage volume. However, there...

    Authors: Zhi-Quan Liu, Hui Qiu, Xiao Li and Shu-Li Yang
    Citation: Chinese Journal of Mechanical Engineering 2017 30:198
  18. The current morphological wavelet technologies utilize a fixed filter or a linear decomposition algorithm, which cannot cope with the sudden changes, such as impulses or edges in a signal effectively. This pap...

    Authors: Yi-Fan Li, MingJian Zuo, Ke Feng and Yue-Jian Chen
    Citation: Chinese Journal of Mechanical Engineering 2017 30:186
  19. With integrated equipment health prognosis, both physical models and condition monitoring data are utilized to achieve more accurate prediction of equipment remaining useful life (RUL). In this paper, an integ...

    Authors: Fu-Qiong Zhao, Ming-Jiang Xie, Zhi-Gang Tian and Yong Zeng
    Citation: Chinese Journal of Mechanical Engineering 2017 30:200
  20. The gripper cylinder that provides braced force for Tunnel Boring Machine (TBM) might fail due to severe vibration when the TBM excavates in the tunnel. Early fault diagnosis of the gripper cylinder is importa...

    Authors: Lin Li, Jian-Feng Tao, Hai-Dong Yu, Yi-Xiang Huang and Cheng-Liang Liu
    Citation: Chinese Journal of Mechanical Engineering 2017 30:187
  21. Detection of structural changes from an operational process is a major goal in machine condition monitoring. Existing methods for this purpose are mainly based on retrospective analysis, resulting in a large d...

    Authors: Teng Wang, Guo-Liang Lu, Jie Liu and Peng Yan
    Citation: Chinese Journal of Mechanical Engineering 2017 30:191
  22. The pneumatic pressure control systems have been used in some fields. However, the researches on pneumatic pressure control mainly focus on constant pressure regulation. Poor dynamic characteristics and strong...

    Authors: Gang Yang, Jing-Min Du, Xiao-Yun Fu and Bao-Ren Li
    Citation: Chinese Journal of Mechanical Engineering 2017 30:194
  23. Performance index is the standard of performance evaluation, and is the foundation of both performance analysis and optimal design for the parallel manipulator. Seeking the suitable kinematic indices is always...

    Authors: Zhu-Feng Shao, Jiao Mo, Xiao-Qiang Tang and Li-Ping Wang
    Citation: Chinese Journal of Mechanical Engineering 2017 30:193
  24. Extracting features from original signals is a key procedure for traditional fault diagnosis of induction motors, as it directly influences the performance of fault recognition. However, high quality features ...

    Authors: Si-Yu Shao, Wen-Jun Sun, Ru-Qiang Yan, Peng Wang and Robert X Gao
    Citation: Chinese Journal of Mechanical Engineering 2017 30:189
  25. Smart machining has tremendous potential and is becoming one of new generation high value precision manufacturing technologies in line with the advance of Industry 4.0 concepts. This paper presents some innova...

    Authors: Kai Cheng, Zhi-Chao Niu, Robin C. Wang, Richard Rakowski and Richard Bateman
    Citation: Chinese Journal of Mechanical Engineering 2017 30:183
  26. Pneumatic muscles with similar characteristics to biological muscles have been widely used in robots, and thus are promising drivers for frog inspired robots. However, the application and nonlinearity of the p...

    Authors: Ji-Zhuang Fan, Wei Zhang, Peng-Cheng Kong, He-Gao Cai and Gang-Feng Liu
    Citation: Chinese Journal of Mechanical Engineering 2017 30:182
  27. Crack fault diagnostics plays a critical role for rotating machinery in the traditional and Industry 4.0 factory. In this paper, an experiment is set up to study the dynamic response of a rotor with a breathin...

    Authors: Chao-Zhong Guo, Ji-Hong Yan and Lawrence A. Bergman
    Citation: Chinese Journal of Mechanical Engineering 2017 30:180
  28. Designers and manufacturers often see consumption as the primary objective of a product – with implications such as discarded products, obsolete wastes, and ecological degradation. The paper aims to find the a...

    Authors: Mersha Aftab and Helen Agustin Rusli
    Citation: Chinese Journal of Mechanical Engineering 2017 30:161
  29. Thermal error monitoring technology is the key technological support to solve the thermal error problem of heavy-duty CNC (computer numerical control) machine tools. Currently, there are many review literature...

    Authors: Zu-De Zhou, Lin Gui, Yue-Gang Tan, Ming-Yao Liu, Yi Liu and Rui-Ya Li
    Citation: Chinese Journal of Mechanical Engineering 2017 30:166
  30. Cavitation erosion (CE) is the predominant cause for the failure of overflow components in fluid machinery. Advanced coatings have provided an effective solution to cavitation erosion due to the rapid developm...

    Authors: Xiang Ding, Xu-Dong Cheng, Cheng-Qing Yuan, Jin Shi and Zhang-Xiong Ding
    Citation: Chinese Journal of Mechanical Engineering 2017 30:162
  31. Considered as a top priority of industrial development, Industry 4.0 (or Industrie 4.0 as the German version) has being highlighted as the pursuit of both academy and practice in companies. In this paper, base...

    Authors: Egon Mueller, Xiao-Li Chen and Ralph Riedel
    Citation: Chinese Journal of Mechanical Engineering 2017 30:164
  32. Multi-product collaborative development is adopted widely in manufacturing enterprise, while the present multi-project planning models don’t take technical/data interactions of multiple products into account. ...

    Authors: Qing-Chao Sun, Wei-Qiang Huang, Ying-Jie Jiang and Wei Sun
    Citation: Chinese Journal of Mechanical Engineering 2017 30:160
  33. Attempts to minimize energy consumption of a tunnel boring machine disc cutter during the process of fragmentation have largely focused on optimizing disc-cutter spacing, as determined by the minimum specific ...

    Authors: Zhao-Huang Zhang, Guo-Fang Gong, Qing-Feng Gao and Fei Sun
    Citation: Chinese Journal of Mechanical Engineering 2017 30:159
  34. The impact fretting wear has largely occurred at nuclear power device induced by the flow-induced vibration, and it will take potential hazards to the service of the equipment. However, the present study focus...

    Authors: Zhen-Bing Cai, Jin-Fang Peng, Hao Qian, Li-Chen Tang and Min-Hao Zhu
    Citation: Chinese Journal of Mechanical Engineering 2017 30:147
  35. This paper reviews the development of valveless piezoelectric pump with cone-shaped tube chronologically, which have widely potential application in biomedicine and micro-electro-mechanical systems because of ...

    Authors: Jian-Hui Zhang, Ying Wang and Jun Huang
    Citation: Chinese Journal of Mechanical Engineering 2017 30:151
  36. Analytical compliance model is vital to the flexure- based compliant mechanism in its mechanical design and motion control. The matrix is a common and effective approach in the compliance modeling while it is ...

    Authors: Li-Ping Wang, Yao Jiang and Tie-Min Li
    Citation: Chinese Journal of Mechanical Engineering 2017 30:138
  37. Computational intelligence is one of the most powerful data processing tools to solve complex nonlinear problems, and thus plays a significant role in intelligent fault diagnosis and prediction. However, only ...

    Authors: Wan Zhang, Min-Ping Jia, Lin Zhu and Xiao-An Yan
    Citation: Chinese Journal of Mechanical Engineering 2017 30:150
  38. The accurate estimation of road friction coefficient in the active safety control system has become increasingly prominent. Most previous studies on road friction estimation have only used vehicle longitudinal...

    Authors: You-Qun Zhao, Hai-Qing Li, Fen Lin, Jian Wang and Xue-Wu Ji
    Citation: Chinese Journal of Mechanical Engineering 2017 30:143

    The Erratum to this article has been published in Chinese Journal of Mechanical Engineering 2017 30:s10033-017-0178-1

  39. Large reflector antennas are widely used in radars, satellite communication, radio astronomy, and so on. The rapid developments in these fields have created demands for development of better performance and hi...

    Authors: Wei WANG, Peiyuan LIAN, Shuxin ZHANG, Binbin XIANG and Qian XU
    Citation: Chinese Journal of Mechanical Engineering 2017 30:135

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics