Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 11 of 17

  1. Combined with the tire dynamics theoretical model, a rapid test method to obtain tire lateral and longitudinal both steady-state and transient characteristics only based on the tire quasi-steady-state test res...

    Authors: Dang Lu, Lei Lu, Haidong Wu, Wei Wang and Manyi Lv
    Citation: Chinese Journal of Mechanical Engineering 2020 33:85
    Content type: Original Article Published on:

  2. In the nondestructive testing and evaluation area, magnetic major hysteresis loop measurement technology are widely applied for ferromagnetic material evaluation. However the characterization ability of major ...

    Authors: Cunfu He, Wenqiao Dou, Xiucheng Liu, Meng Yang and Ruifang Zhang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:84
    Content type: Original Article Published on:

  3. The spindle barrel finishing is commonly used to improve the surface integrity of the important parts of the high-end equipment while it is difficult to provide enough test artifacts for the traditional trial ...

    Authors: Na Wang, Shengqiang Yang, Tingting Zhao, Bo Cao and Chengwei Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:83
    Content type: Original Article Published on:

  5. The current research of reconfigurable parallel mechanism mainly focuses on the construction of reconfigurable joints. Compared with the method of changing the mobility by physical locking joints, the geometri...

    Authors: Duanling Li, Pu Jia, Jiazhou Li, Dan Zhang and Xianwen Kong
    Citation: Chinese Journal of Mechanical Engineering 2020 33:81
    Content type: Original Article Published on:

  6. Current research concerning legged platforms and wheeled platforms primarily focuses on terrain adaptive capability and speed capability, respectively. Compared with wheeled platforms, legged platforms with a ...

    Authors: Chaoran Wei, Yanan Yao, Jianxu Wu and Ran Liu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:80
    Content type: Original Article Published on:

  8. The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms, or using screw theory to perform multi...

    Authors: Yongquan Li, Yang Zhang and Lijie Zhang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:78
    Content type: Original Article Published on:

  9. As a type of multiconfiguration mechanism that can operate in an under-actuated state, metamorphic mechanisms were proposed more than two decades ago and attracted significant interest. Studies on structural s...

    Authors: Qiang Yang, Guangbo Hao, Shujun Li, Hongguang Wang and Haiyang Li
    Citation: Chinese Journal of Mechanical Engineering 2020 33:77
    Content type: Original Article Published on:

  10. Aluminum alloys have drawn considerable attention in the area of automotive lightweight. High strength aluminum alloys are usually deformed at elevated temperatures due to their poor formability at room temper...

    Authors: Jianping Lin, Xingyu Bao, Yong Hou, Junying Min, Xinlei Qu, Zhimin Tao and Jiajie Chen
    Citation: Chinese Journal of Mechanical Engineering 2020 33:76
    Content type: Original Article Published on:

  11. Devices with variable stiffness are drawing more and more attention with the growing interests of human-robot interaction, wearable robotics, rehabilitation robotics, etc. In this paper, the authors report on ...

    Authors: Zhuang Zhang, Genliang Chen, Weicheng Fan, Wei Yan, Lingyu Kong and Hao Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:75
    Content type: Original Article Published on:

  12. With the development of intelligent flexible manufacturing, traditional industrial manipulators with a single configuration are difficult to meet a variety of tasks. Reconfigurable robots have developed rapidl...

    Authors: Wenfu Xu, Liang Han, Xin Wang, Han Yuan and Bin Liang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:74
    Content type: Original Article Published on:

  13. Diamond tools with orderly arrangements of diamond grits have drawn considerable attention in the machining field owing to their outstanding advantages of high sharpness and long service life. This diamond sup...

    Authors: Bin Chen, Peng Chen, Yongjun Huang, Xiangxi Xu, Yibo Liu and Shuangxi Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:73
    Content type: Original Article Published on:

  15. A super redundant serpentine manipulator has slender structure and multiple degrees of freedom. It can travel through narrow spaces and move in complex spaces. This manipulator is composed of many modules that...

    Authors: Li Chen, Ying Ma, Yu Zhang and Jinguo Liu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:71
    Content type: Original Article Published on:

  16. As the structures of multiarm robots are serially arranged, the packaging and transportation of these robots are often inconvenient. The ability of these robots to operate objects must also be improved. Addres...

    Authors: Fu-Qun Zhao, Sheng Guo, Hai-Jun Su, Hai-Bo Qu and Ya-Qiong Chen
    Citation: Chinese Journal of Mechanical Engineering 2020 33:70
    Content type: Original Article Published on:

  17. In the case of valuable cold-rolled Cu/Al clad plates, billet surface treatment before rolling is a significant process that can affect the bonding efficiency and quality. While the current studies primarily f...

    Authors: Jianchao Han, Hui Niu, Sha Li, Zhongkai Ren, Yi Jia, Tao Wang, A. I. Plokhikh and Qingxue Huang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:69
    Content type: Original Article Published on:

  18. Space-deployable mechanisms can be used as supporting structures for large-diameter antennas in space engineering. This study proposes a novel method for constructing the surface design of space reflector ante...

    Authors: Pengyuan Zhao, Jinguo Liu, Chenchen Wu, Yangmin Li and Keli Chen
    Citation: Chinese Journal of Mechanical Engineering 2020 33:68
    Content type: Original Article Published on:

  19. The spherical valve plate/cylinder block pair has the advantages of strong overturning resistance and large bearing area. However, the configurations of the unloading and pre-boosting triangular grooves on the...

    Authors: Bin Zhao, Weiwei Guo and Long Quan
    Citation: Chinese Journal of Mechanical Engineering 2020 33:67
    Content type: Original Article Published on:

  20. Deep-sea sediment is extremely important in marine scientific research, such as that concerning marine geology and microbial communities. The research findings are closely related to the in-situ information of...

    Authors: Shudong He, Youduo Peng, Yongping Jin, Buyan Wan and Guangping Liu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:66
    Content type: Review Published on:

  21. Zr-based Bulk metallic glasses exhibit incredible corrosion resistance and glass forming ability, however, these properties need further enhancement to meet the practical use. In this study, Zr63Fe2.5Cu23Al11.5, ...

    Authors: Yu Luo, Yidong Jiang, Pei Zhang, Xin Wang, Haibo Ke and Pengcheng Zhang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:65
    Content type: Original Article Published on:

  23. It has been challenging to design seedling pick-up mechanism based on given key points and trajectories, because it involves dimensional synthesis and rod length optimization. In this paper, the dimensional sy...

    Authors: Zhipeng Tong, Gaohong Yu, Xiong Zhao, Pengfei Liu and Bingliang Ye
    Citation: Chinese Journal of Mechanical Engineering 2020 33:63
    Content type: Original Article Published on:

  24. Topology and performance are the two main topics dealt in the development of robotic mechanisms. However, it is still a challenge to connect them by integrating the modeling and design process of both parts in...

    Authors: Xinming Huo, Shuofei Yang, Binbin Lian, Tao Sun and Yimin Song
    Citation: Chinese Journal of Mechanical Engineering 2020 33:62
    Content type: Review Published on:

  25. Current research on lane-keeping systems ignores the effect of the driver and external resistance on the accuracy of tracking the lane centerline. To reduce the lateral deviation of the vehicle, a lane-keeping...

    Authors: Wuwei Chen, Linfeng Zhao, Huiran Wang and Yangcheng Huang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:61
    Content type: Original Article Published on:

  26. Achieving accurate speed prediction provides the most critical support parameter for high-level energy management of plug-in hybrid electric vehicles. Nowadays, people often drive a vehicle on fixed routes in ...

    Authors: Lipeng Zhang, Wei Liu and Bingnan Qi
    Citation: Chinese Journal of Mechanical Engineering 2020 33:60
    Content type: Original Article Published on:

  27. In gear transmission, temperature rise has a non-negligible impact on the accuracy, noise and transmission efficiency. However, there is no relevant research on the temperature rise of the anti-backlash single...

    Authors: Shisong Wang, Shike Wang, Jie Wang and Xingqiao Deng
    Citation: Chinese Journal of Mechanical Engineering 2020 33:59
    Content type: Original Article Published on:

  28. Pandemics like COVID-19 have created a spreading and ever-higher healthy threat to the humans in the manufacturing system which incurs severe disruptions and complex issues to industrial networks. The intellig...

    Authors: Xingyu Li, Baicun Wang, Chao Liu, Theodor Freiheit and Bogdan I. Epureanu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:58
    Content type: Research highlight Published on:

  29. Nickel-cobalt/silicon carbide (Ni-Co/SiC) composite coatings were fabricated by supergravity field-enhanced electrodeposition. The surface morphology and the distribution of the SiC particles in the coatings w...

    Authors: Xiaoyun Hu and Ningsong Qu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:57
    Content type: Original Article Published on:

  31. Single point incremental forming (SPIF) is an innovative sheet forming process with a high economic pay-off. The formability in this process can be maximized by executing forming with a tool of specific small ...

    Authors: Hongyu Wei, G. Hussain, X. Shi, B. B. L Isidore, Mohammed Alkahtani and Mustufa Haider Abidi
    Citation: Chinese Journal of Mechanical Engineering 2020 33:55
    Content type: Original Article Published on:

  32. To avoid impacts and vibrations during the processes of acceleration and deceleration while possessing flexible working ways for cable-suspended parallel robots (CSPRs), point-to-point trajectory planning dema...

    Authors: Tao Zhao, Bin Zi, Sen Qian and Jiahao Zhao
    Citation: Chinese Journal of Mechanical Engineering 2020 33:54
    Content type: Original Article Published on:

  33. Pure iron is one of the difficult-to-machine materials due to its large chip deformation, adhesion, work-hardening, and built-up edges formation during machining. This leads to a large workpiece deformation an...

    Authors: Yinfei Yang, Lu Jin, Jinpeng Zhu, Jinxing Kong and Liang Li
    Citation: Chinese Journal of Mechanical Engineering 2020 33:53
    Content type: Original Article Published on:

  34. Current and displacement stiffness are important parameters of axial magnetic bearing (AMB) and are usually considered as constants for the control system. However, in actual dynamic work situations, time-vary...

    Authors: Jinji Sun, Wanting Wei, Jiqiang Tang and Chun-E Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:52
    Content type: Original Article Published on:

  35. State of charge (SOC) estimation for lithium ion batteries plays a critical role in battery management systems for electric vehicles. Battery fractional order models (FOMs) which come from frequency-domain mod...

    Authors: Jinpeng Tian, Rui Xiong, Weixiang Shen and Ju Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:51
    Content type: Original Article Published on:

  36. Current research of automatic transmission (AT) mainly focuses on the improvement of driving performance, and configuration innovation is one of the main research directions. However, finding new configuration...

    Authors: Huafeng Ding, Changwang Cai, Ziming Chen, Tao Ke and Bowen Mao
    Citation: Chinese Journal of Mechanical Engineering 2020 33:50
    Content type: Original Article Published on:

  37. Propulsion during push-off is the key to realizing human locomotion. Humans have evolved a way of walking with high energy utilization, but it can be further improved. Drawing inspiration from the muscle-tendo...

    Authors: Xiangyang Wang, Sheng Guo, Bojian Qu, Majun Song and Haibo Qu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:49
    Content type: Original Article Published on:

  38. Pipe belt conveyor is a new type of environmentally friendly and efficient bulk conveying equipment. In the design of the roller, the belt and the driving motor of pipe belt conveyor, the sag resistance is a k...

    Authors: Shuaiping Guo, Wei Huang and Xuejun Li
    Citation: Chinese Journal of Mechanical Engineering 2020 33:48
    Content type: Original Article Published on:

  40. Recent researches show that there are some anomalies, which are not satisfied with common sense, appearing in some special permutation flow shop scheduling problems (PFSPs). These anomalies can be divided into...

    Authors: Lin Gui, Liang Gao and Xinyu Li
    Citation: Chinese Journal of Mechanical Engineering 2020 33:46
    Content type: Original Article Published on:

  41. High strength steel products with good ductility can be produced via Q&P hot stamping process, while the phase transformation of the process is more complicated than common hot stamping since two-step quenchin...

    Authors: Yang Chen, Huizhen Zhang, Johnston Jackie Tang, Xianhong Han and Zhenshan Cui
    Citation: Chinese Journal of Mechanical Engineering 2020 33:45
    Content type: Original Article Published on:

  42. To study the characteristics of the 5-prismatic–spherical–spherical (PSS)/universal–prismatic–universal (UPU) parallel mechanism with elastically active branched chains, the dynamics modeling and solutions of ...

    Authors: Yanbiao Li, Hang Zheng, Bo Chen, Peng Sun, Zesheng Wang, Kun Shuai and Yi Yue
    Citation: Chinese Journal of Mechanical Engineering 2020 33:44
    Content type: Original Article Published on:

  43. The rapidly increasing demand and complexity of manufacturing process potentiates the usage of manufacturing data with the highest priority to achieve precise analyze and control, rather than using simplified ...

    Authors: Ke Xu, Yingguang Li, Changqing Liu, Xu Liu, Xiaozhong Hao, James Gao and Paul G. Maropoulos
    Citation: Chinese Journal of Mechanical Engineering 2020 33:43
    Content type: Review Published on:

  44. Solid particle erosion is a common phenomenon in engineering fields, such as manufacturing, energy, military and aviation. However, with the rising industrial requirements, the development of anti-solid partic...

    Authors: Shuaijun Zhang, Junqiu Zhang, Bin Zhu, Shichao Niu, Zhiwu Han and Luquan Ren
    Citation: Chinese Journal of Mechanical Engineering 2020 33:42
    Content type: Review Published on:

  45. The different conditions of use of a component result in a variety of damage levels. Therefore, excluding differences in shape and size, used parts show a high degree of uncertainty regarding failure character...

    Authors: Wenhao Huang, Zhigang Jiang, Teng Wang, Yan Wang and Xiaoli Hu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:41
    Content type: Original Article Published on:

  46. Hole drilling or contour milling for the large and complex workpieces such as automobile panels and aircraft fuselages makes a high combined demand on machining accuracy, stiffness and workspace of machining e...

    Authors: Nanyan Shen, Liang Geng, Jing Li, Fei Ye, Zhuang Yu and Zirui Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:40
    Content type: Original Article Published on:

  47. Thin-walled long stringer made of aluminum alloy 7050-T7451 is prone to deformation during transportation, so a research of residual stress relaxation was launched in this paper. The transport resonance stress...

    Authors: Yinfei Yang, Lu Jin, Jixing Du, Liang Li and Wei Yang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:39
    Content type: Original Article Published on:

  49. The torque–angle characteristics of electric–mechanical converters are important determinants of the quality of electrohydraulic proportional control systems. It is far more difficult for a rotary electric–mec...

    Authors: Bin Meng, Yongjiang Lai and Xinguo Qiu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:35
    Content type: Original Article Published on:

  50. Wet multi-plate clutches are relevant components of modern drivetrain applications, not only in terms of function but also safety and comfort. Especially at the beginning of their lifetime, distinct changes of...

    Authors: Katharina Voelkel, Hermann Pflaum and Karsten Stahl
    Citation: Chinese Journal of Mechanical Engineering 2020 33:34
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)