Skip to main content

Articles

Page 13 of 17

  1. As energy crisis and environment pollution all around the world threaten the widespread use of fossil fuels, compressed natural gas (CNG) vehicles are explored as an alternative to the conventional gasoline po...

    Authors: Hyoseo Kwak, Gunyoung Park, Hansaem Seong and Chul Kim
    Citation: Chinese Journal of Mechanical Engineering 2019 32:83
  2. The magnetic properties of the claw pole have a direct effect on the output power of a generator. Many methods can be used to measure these magnetic properties, each with its own advantages, but an important s...

    Authors: Chengliang Hu, Xuejiao Bai, Minjun Tang, Xiaofeng Tang and Zhen Zhao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:82
  3. High-dispersed nanoscale Cu precipitates often contribute to extremely high strength due to precipitation hardening, and whereas usually lead to degraded toughness for especially ferritic steels. Hence, it is ...

    Authors: Lizhan Han, Qingdong Liu and Jianfeng Gu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:81
  4. The hydro-viscous drive (HVD) has been widely used in fan transmission in vehicles, fans, and scraper conveyors for step-less speed regulation or soft starting. In the mixed friction stage, the contact, fricti...

    Authors: Hongwei Cui, Qiliang Wang, Zisheng Lian and Long Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:80
  5. A bionic flexible manipulator driven by pneumatic muscle actuator (PMA) can better reflect the flexibility of the mechanism. Current research on PMA mainly focuses on the modeling and control strategy of the p...

    Authors: Kai Liu, Yining Chen, Jiaqi Xu, Yang Wu, Yonghua Lu and Dongbiao Zhao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:79
  6. In current research on soft grippers, pneumatically actuated soft grippers are generally fabricated using fully soft materials, which have the advantage of flexibility as well as the disadvantages of a small g...

    Authors: Zhaoping Wu, Xiaoning Li and Zhonghua Guo
    Citation: Chinese Journal of Mechanical Engineering 2019 32:78
  7. There are vast constraint equations in conventional dynamics analysis of deployable structures, which lead to differential-algebraic equations (DAEs) solved hard. To reduce the difficulty of solving and the am...

    Authors: Qi’an Peng, Sanmin Wang, Changjian Zhi and Bo Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:77
  8. Earings appear easily during deep drawing of cylindrical parts owing to the anisotropic properties of materials. However, current methods cannot fully utilize the mechanical properties of material, and the num...

    Authors: Haibo Wang, Mingliang Men, Yu Yan, Min Wan and Qiang Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:76
  9. Lower limb rehabilitation exoskeleton robots integrate sensing, control, and other technologies and exhibit the characteristics of bionics, robotics, information and control science, medicine, and other interd...

    Authors: Di Shi, Wuxiang Zhang, Wei Zhang and Xilun Ding
    Citation: Chinese Journal of Mechanical Engineering 2019 32:74
  10. Traditional simulation methods are unable to meet the requirements of lunar takeoff simulations, such as high force output precision, low cost, and repeated use. Considering that cable-driven parallel mechanis...

    Authors: Wangmin Yi, Yu Zheng, Weifang Wang, Xiaoqiang Tang, Xinjun Liu and Fanwei Meng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:73
  11. By studying the effects of geometric precision on kinematic accuracy, an error mapping model has been established, based on the hypothesis that a motion pair and its installation surface are rigid. However, wh...

    Authors: Yanbing Ni, Haiyang Zhou, Cuiyan Shao and Jinhe Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:72
  12. When the gearbox body interference is connected to the ring gear, prestressing occurs in the ring gear, which has a significant impact on the strength and life of the gear. Research on the prestressing of the ...

    Authors: Shiping Yang, Yixing Ji, Yulin Mo and Tianyu Xia
    Citation: Chinese Journal of Mechanical Engineering 2019 32:71
  13. The vibration propagates through the shaft in the form of elastic waves. The propagation characteristics of the elastic waves are affected by the axial loads. The influence of the axial loads to the propagatio...

    Authors: Yimin Wei, Zhiwei Zhao, Wenhua Chen and Qi Liu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:70
  14. Disposable blood collection needles become severely intertwined and hooked during stacking, and thus individually feeding disposable blood collection needles during mechanical packaging is difficult. Based on ...

    Authors: Junhua Tong, Yingpeng Zhu, Leiying He, Chuanyu Wu and Peilin Cheng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:69
  15. Grinding burn monitoring is of great importance to guarantee the surface integrity of the workpiece. Existing methods monitor overall signal variation. However, the signals produced by metal burn are always we...

    Authors: Zheyu Gao, Jing Lin, Xiufeng Wang and Yuhe Liao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:68
  16. Resilient wheels are extensively used in urban rail transit, especially for tramway systems, owing to its advantages in noise reduction. A new type of resilient wheel for a metro is designed, and its character...

    Authors: Xin Zhou, Jian Han, Yue Zhao, Bing Wu, Gong Cheng, Shenghui Xu and Xuesong Jin
    Citation: Chinese Journal of Mechanical Engineering 2019 32:67
  17. Current studies of a seawater axial piston pump mainly solve the problems of corrosion and wear in a slipper pair by selecting materials with corrosion resistance, self-lubrication, and wear resistance. In add...

    Authors: Yingna Liang, Dianrong Gao, Bo Chen and Jianhua Zhao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:66
  18. The unstable flow phenomena in compressors, such as stall and surge, are closely related to the efficiency and the operating region. It is indispensable to capture the unstable flow structure in compressors an...

    Authors: Xiang Xue and Tong Wang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:65
  19. Vehicle rollover, and its resulting fatalities, is an actively researched topic especially for multi-axle vehicles in the field of vehicle dynamics and control. This paper first presents a new rollover index f...

    Authors: Zhilin Jin, Jingxuan Li, Yanjun Huang and Amir Khajepour
    Citation: Chinese Journal of Mechanical Engineering 2019 32:64
  20. Non-contact actuated microbeads have attracted a lot of attention in recent years because of its enormous potential in medical, biological, and industrial applications. Researchers have proposed a multitude of...

    Authors: Xiaolong Jing and Weizhong Guo
    Citation: Chinese Journal of Mechanical Engineering 2019 32:63
  21. Due to the influence of material characteristics and winding power, single output electromagnet has limited ability to improve the dynamic characteristic of electro-hydraulic valve. Therefore, an electromechan...

    Authors: Xuping Wang, Long Quan, Shiyi Luan and Xiaoqing Xu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:62
  22. When the mobile robot performs certain motion tasks in complex environment, wheel slipping inevitably occurs due to the wet or icy road and other reasons, thus directly influences the motion control accuracy. ...

    Authors: Gang Wang, Xiaoping Liu, Yunlong Zhao and Song Han
    Citation: Chinese Journal of Mechanical Engineering 2019 32:61
  23. Currently, lithium–sulfur batteries suffer from several critical limitations that hinder their practical application, such as the large volumetric expansion of electrode, poor conductivity and lower sulfur uti...

    Authors: Xinyu Shan, Zuoxing Guo, Xu Zhang, Jie Yang and Lianfeng Duan
    Citation: Chinese Journal of Mechanical Engineering 2019 32:60
  24. Noise is one of the key issues in the operation of high-speed railways, with sound source localisation and its transfer path as the two major aspects. This study investigates both the exterior and interior sou...

    Authors: Jie Zhang, Xinbiao Xiao, Xiaozhen Sheng and Zhihui Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:59
  25. The brake unit bracket of a bogie frame is an important load-carrying component, particularly under emergency start/stop conditions. Conventional infinite/safe life approaches provide an over-conservative reco...

    Authors: Bing Yang, Hao Duan, Shengchuan Wu and Guozheng Kang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:58
  26. The labyrinth seal in turbomachinery is a key element that restricts leakage flow among rotor-stator clearances from high-pressure regions to low-pressure regions. The fluid-induced forces on the rotor from se...

    Authors: Qingfeng Wang and Lidong He
    Citation: Chinese Journal of Mechanical Engineering 2019 32:56
  27. Penetration estimation is a prerequisite of the automation of backing welding based on vision sensing technology. However, the arc interference in welding process leads to the difficulties of extracting the we...

    Authors: Junfen Huang, Long Xue, Jiqiang Huang, Yong Zou and Ke Ma
    Citation: Chinese Journal of Mechanical Engineering 2019 32:55
  28. Being different from avoidance of singularity of closed-loop linkages, this paper employs the kinematic singularity to construct compliant mechanisms with expected nonlinear stiffness characteristics to enrich...

    Authors: Baokun Li and Guangbo Hao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:54
  29. Although several research works in the literature have focused on studying the capabilities of additive manufacturing (AM) systems, few works have addressed the development of Design for Additive Manufacturing...

    Authors: Hugo I. Medellin-Castillo and Jorge Zaragoza-Siqueiros
    Citation: Chinese Journal of Mechanical Engineering 2019 32:53
  30. Machining damage occurs on the surface of carbon fiber reinforced polymer (CFRP) composites during processing. In the current simulation model of CFRP, the initial defects on the carbon fiber and the periodic ...

    Authors: Haitao Liu, Jie Lin, Yazhou Sun and Jinyang Zhang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:52
  31. The current method of estimating the fatigue life of railway structures is to calculating the equivalent stress amplitude based on the measured stress data. However, the random of the measured data is not cons...

    Authors: Guangxue Yang, Meng Wang, Qiang Li and Ran Ding
    Citation: Chinese Journal of Mechanical Engineering 2019 32:51
  32. In order to control the ferrite and austenite percentage in duplex stainless steel welding, many researchers try to change the laser welding parameters and cooling medium, but ignore to study the influence of ...

    Authors: P. Dinesh Babu, P. Gouthaman and P. Marimuthu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:50
  33. Currently, transplanting mechanisms for dryland plug seedlings in China are mainly semiautomatic and have low efficiency. The rotary seedling pick-up mechanism with a planetary gear train for non-uniform inter...

    Authors: Yaxin Yu, Jikun Liu, Bingliang Ye, Gaohong Yu, Xuejun Jin, Liang Sun and Junhua Tong
    Citation: Chinese Journal of Mechanical Engineering 2019 32:49
  34. Soft cable-driven systems have been employed in many assembled mechanisms, such as industrial robots, parallel kinematic mechanism machines, medical devices, and humaniform hands. A pre-stretching process is n...

    Authors: Guokai Zhang, Xuyang Ren, Jinhua Li, Kang Kong, Shuxin Wang and Jingchao Shen
    Citation: Chinese Journal of Mechanical Engineering 2019 32:48
  35. A model based on the curvature integration method has been applied in an online plate leveling system. However, there are some shortcomings in the current leveling models. On the one hand, the models cannot de...

    Authors: Ben Guan, Chao Zhang, Yong Zang and Yuan Wang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:47
  36. Based on Multi-Masking Empirical Mode Decomposition (MMEMD) and fuzzy c-means (FCM) clustering, a new method of wind turbine bearing fault diagnosis FCM-MMEMD is proposed, which can determine the fault accurat...

    Authors: Yongtao Hu, Shuqing Zhang, Anqi Jiang, Liguo Zhang, Wanlu Jiang and Junfeng Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:46
  37. A numerical control (NC) tool path of digital CAD model is widely generated as a set of short line segments in machining. However, there are three shortcomings in the linear tool path, such as discontinuities ...

    Authors: Yongqiao Jin, Sheng Zhao and Yuhan Wang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:43
  38. The current research on gear system dynamics mainly utilizes linear spring damping model to calculate the contact force between gears. However, this linear model cannot correctly describe the energy transfer p...

    Authors: Dong Xiang, Yinhua Shen and Yaozhong Wei
    Citation: Chinese Journal of Mechanical Engineering 2019 32:41
  39. Different wind models are being used for the operational safety evaluation of a high-speed train exposed to crosswinds. However, the methodology for simulating natural wind is of substantial importance in the ...

    Authors: Mengge Yu, Rongchao Jiang, Qian Zhang and Jiye Zhang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:40
  40. Type synthesis of mechanisms aims to systematically determine all possible structures for a specific mobility requirement. Numerous methods based on different theories were proposed for type synthesis of lower...

    Authors: Wei Ye and Qinchuan Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:38
  41. Owing to heavy dynamic and thermal loads, PCBN tools are seriously worn during hard cutting, which largely constrains the improvement of their machining performance. Therein, the chamfered structure of a cutti...

    Authors: Tao Chen, Lixing Song, Suyan Li and Xianli Liu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:37
  42. The current research of wind turbine drivetrain is mainly concentrated in dynamic characteristics of gearbox with a specific suspension of main shaft, such as one-point and two-point suspension. However, littl...

    Authors: Jianjun Tan, Caichao Zhu, Chaosheng Song, Huali Han and Yao Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:36
  43. Rolling element bearings are key components of mechanical equipment. The bearing fault characteristics are affected by the interaction in the vibration signals. The low harmonics of the bearing characteristic ...

    Authors: Aijun Hu, Ling Xiang, Sha Xu and Jianfeng Lin
    Citation: Chinese Journal of Mechanical Engineering 2019 32:35
  44. Posture adjustment of open-type hard rock tunnel boring machine (TBM) can be achieved by properly adjusting the hydraulic pressure of gripper cylinder and torque cylinders. However, the time-varying inhomogene...

    Authors: Chengjun Shao, Jianfeng Liao, Zhitao Liu and Hongye Su
    Citation: Chinese Journal of Mechanical Engineering 2019 32:34

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC