Skip to main content

Articles

Page 3 of 13

  1. Adaptive wavelet filtering is a very important fault feature extraction method in the domain of condition monitoring; however, owing to the time-consuming computation and difficulty of choosing criteria used t...

    Authors: Mang Gao, Gang Yu and Changning Li
    Citation: Chinese Journal of Mechanical Engineering 2022 35:10
  2. To integrate driver experience and heterogeneous vehicle platform characteristics in a motion-planning algorithm, based on the driver-behavior-based transferable motion primitives (MPs), a general motion-plann...

    Authors: Haijie Guan, Boyang Wang, Jiaming Wei, Yaomin Lu, Huiyan Chen and Jianwei Gong
    Citation: Chinese Journal of Mechanical Engineering 2022 35:9
  3. Electric load simulator (ELS) systems are employed for electric power steering (EPS) test benches to load rack force by precise control. Precise ELS control is strongly influenced by nonlinear factors. When th...

    Authors: Changhua Dai, Guoying Chen, Changfu Zong and Buyang Zhang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:8
  4. Many surveys on vehicle traffic safety have shown that the tire road friction coefficient (TRFC) is correlated with the probability of an accident. The probability of road accidents increases sharply on slippe...

    Authors: Yan Wang, Jingyu Hu, Fa’an Wang, Haoxuan Dong, Yongjun Yan, Yanjun Ren, Chaobin Zhou and Guodong Yin
    Citation: Chinese Journal of Mechanical Engineering 2022 35:6
  5. With the rapid developments of marine resource exploitation, mounts of marine engineering equipment are settled on the ocean. When it is not possible to move the damaged equipment into a dry dock, welding oper...

    Authors: Guifang Sun, Zhandong Wang, Yi Lu, Mingzhi Chen, Kun Yang and Zhonghua Ni
    Citation: Chinese Journal of Mechanical Engineering 2022 35:5
  6. Aging diagnosis of batteries is essential to ensure that the energy storage systems operate within a safe region. This paper proposes a novel cell to pack health and lifetime prognostics method based on the co...

    Authors: Yunhong Che, Zhongwei Deng, Xiaolin Tang, Xianke Lin, Xianghong Nie and Xiaosong Hu
    Citation: Chinese Journal of Mechanical Engineering 2022 35:4
  7. The application of cutting fluid in the field of engineering manufacturing has a history of hundreds of years, and it plays a vital role in the processing efficiency and surface quality of parts. Among them, w...

    Authors: Lizhi Tang, Yanbin Zhang, Changhe Li, Zongming Zhou, Xiaolin Nie, Yun Chen, Huajun Cao, Bo Liu, Naiqing Zhang, Zafar Said, Sujan Debnath, Muhammad Jamil, Hafiz Muhammad Ali and Shubham Sharma
    Citation: Chinese Journal of Mechanical Engineering 2022 35:3
  8. To accommodate the gait and balance disorder of the elderly with age progression and the occurrence of various senile diseases, this paper proposes a novel gait balance training robot (G-Balance) based on a si...

    Authors: Fu Yuan, Diansheng Chen, Chenghang Pan, Jun Du, Xiaodong Wei and Min Wang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:2
  9. It is a striking fact that the path tracking accuracy of autonomous vehicles based on active front wheel steering is poor under high-speed and large-curvature conditions. In this study, an adaptive path tracki...

    Authors: Ying Tian, Qiangqiang Yao, Peng Hang and Shengyuan Wang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:1
  10. This paper presents a digital model for the powder metallurgical (PM) production chain of high-performance sintered gears based on an integrated computational materials engineering (ICME) platform. Discrete an...

    Authors: Ali Rajaei, Yuanbin Deng, Oliver Schenk, Soheil Rooein, Alexander Bezold and Christoph Broeckmann
    Citation: Chinese Journal of Mechanical Engineering 2021 34:143
  11. For design and application of particulate reinforced metal matrix composites (PRMMCs), it is essential to predict the material strengths and understand how do they relate to constituents and microstructural fe...

    Authors: Geng Chen, Shengzhen Xin, Lele Zhang and Christoph Broeckmann
    Citation: Chinese Journal of Mechanical Engineering 2021 34:142
  12. Existing research on the competitive failure relationship, failure mechanism, and influencing factors of bolt loosening and fatigue under different preloads is insufficient. This study analyzes the competitive...

    Authors: Guangwu Yang, Long Yang, Jingsong Chen, Shoune Xiao and Shilin Jiang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:141
  13. Mechanical engineering structures and structural components are often subjected to cyclic thermomechanical loading which stresses their material beyond its elastic limits well inside the inelastic regime. Depe...

    Authors: Konstantinos V. Spiliopoulos and Ioannis A. Kapogiannis
    Citation: Chinese Journal of Mechanical Engineering 2021 34:140
  14. The electrification of vehicle helps to improve its operation efficiency and safety. Due to fast development of network, sensors, as well as computing technology, it becomes realizable to have vehicles driving...

    Authors: Wenbo Chu, Qiqige Wuniri, Xiaoping Du, Qiuchi Xiong, Tai Huang and Keqiang Li
    Citation: Chinese Journal of Mechanical Engineering 2021 34:139
  15. Sheet-bulk metal forming (SBMF) is a promising process for manufacturing complex sheet components with functional elements. In this study, the entire forming process for a typical thin-walled component with ex...

    Authors: Xincun Zhuang, Meile Liang, Shengfa Zhu, Yin Zhu and Zhen Zhao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:138
  16. Friction Stir Welding (FSW) is the most promising solid-state metals joining method introduced in this era. Compared to the conventional fusion welding methods, this FSW can produce joints with higher mechanic...

    Authors: Dhanesh G Mohan and ChuanSong Wu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:137
  17. Vertical picking method is a predominate method used to harvest cotton crop. However, a vertical picking method may cause spindle bending of the cotton picker if spindles collide with stones on the cotton fiel...

    Authors: Xingzheng Chen, Congbo Li, Rui Hu, Ning Liu and Chi Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:136
  18. To improve the ride comfort and safety of a traditional adaptive cruise control (ACC) system when the preceding vehicle changes lanes, it proposes a target vehicle selection algorithm based on the prediction o...

    Authors: Jun Yao, Guoying Chen and Zhenhai Gao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:135
  19. Joining metal to plastic can lighten weight of products to reduce energy consumption. However, it is difficult to achieve high-strength welding between metal and plastic. To address this problem, the methods o...

    Authors: Jia Liu, Yuchi Dai, Yan Shi, Wenfu Cui and Tao Jiang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:134
  20. Planning and decision-making technology at intersections is a comprehensive research problem in intelligent transportation systems due to the uncertainties caused by a variety of traffic participants. As wirel...

    Authors: Shen Li, Keqi Shu, Chaoyi Chen and Dongpu Cao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:133
  21. In modern fossil and nuclear power plants, the components are subjected to creep, fatigue, and creep-fatigue (CF) due to frequent start-up and shut-down operations at high temperatures. The CF interaction on t...

    Authors: Yuxuan Song, Yi Ma, Zhouxin Pan, Yuebing Li, Taihua Zhang and Zengliang Gao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:131
  22. The hot or cold processing would induce the change and the inhomogeneous of the material mechanical properties in the local processing region of the structure, and it is difficult to obtain the specific mechan...

    Authors: He Xue, Jinxuan He, Jianlong Zhang and Yuxuan Xue
    Citation: Chinese Journal of Mechanical Engineering 2021 34:130
  23. The penetration of CaO–MgO–Al2O3–SiO2 (CMAS) is one of the most significant factors that induce the failure of air-plasma-sprayed thermal barrier coatings (APS TBCs). The direct penetration of CMAS changes the th...

    Authors: Zhenwei Cai, Zifan Zhang, Yingzheng Liu, Xiaofeng Zhao and Weizhe Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:128
  24. A successive tooth forming process for producing large modulus spur gears (m>2.5 mm) is firstly proposed in this paper to break the restrictions of large forming load and large equipment structure of traditional ...

    Authors: Yao Lin, Tao Wu and Guangchun Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:127
  25. Sandwich structures possess a high bending stiffness compared to monolithic structures with a similar weight. This makes them very suitable for lightweight applications, where high stiffness to weight ratios a...

    Authors: M. Nuño, J. Bühring, M. N. Rao and K. -U. Schröder
    Citation: Chinese Journal of Mechanical Engineering 2021 34:126
  26. Sea wave energy generators or converters (WECs) have the potential to become a viable technology for clean, renewable energy production. Among the WEC technologies, the oscillating water columns (OWCs) are the...

    Authors: Mohammad Shalby, Ahmed Elhanafi, Paul Walker, David G. Dorrell, Ahmad Salah and Mohamed R. Gomaa
    Citation: Chinese Journal of Mechanical Engineering 2021 34:124
  27. Oral inhalation of aerosolized drugs has be widely applied in healing the affected body organs including lesions of the throat and lungs and it is more efficient than those conventional therapies, such as intr...

    Authors: Qiufeng Yan, Wanting Sun, Lei Zhang, Hongmei Wang and Jianhui Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:123
  28. The tribological properties of cylinder block/valve plate is an important consideration in the design of axial piston pump. The effect of materials and heat treatment on friction and wear properties has been s...

    Authors: Jiahai Huang, Zhenhua Dou, Zhenglei Wang, Long Quan and Linkai Niu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:122
  29. The singularity problem brings troubles to the design and application for the parallel mechanism. Currently, redundant actuation is one of the useful methods to solve this singularity problem. However, faced t...

    Authors: Chen Zhao, Jingke Song, Xuechan Chen, Ziming Chen and Huafeng Ding
    Citation: Chinese Journal of Mechanical Engineering 2021 34:121
  30. The momentum flow exchange between the impeller and side channel produces highly turbulent flows in side channel pumps. The turbulent flows feature complex patterns of vortex structures that are partly respons...

    Authors: Fan Zhang, Desmond Appiah, Ke Chen, Shouqi Yuan, Kofi Asamoah Adu-Poku and Lufeng Zhu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:120
  31. In the process of Wavelet Analysis, only the low-frequency signals are re-decomposed, and the high-frequency signals are no longer decomposed, resulting in a decrease in frequency resolution with increasing fr...

    Authors: Maohua Xiao, Wei Zhang, Kai Wen, Yue Zhu and Yilidaer Yiliyasi
    Citation: Chinese Journal of Mechanical Engineering 2021 34:119
  32. Fatigue performance is a serious concern for mechanical components subject to cyclical stresses, particularly where safety is paramount. The fatigue performance of components relies closely on their surface in...

    Authors: Guoliang Liu, Chuanzhen Huang, Bin Zhao, Wei Wang and Shufeng Sun
    Citation: Chinese Journal of Mechanical Engineering 2021 34:118
  33. Radar and LiDAR are two environmental sensors commonly used in autonomous vehicles, Lidars are accurate in determining objects’ positions but significantly less accurate as Radars on measuring their velocities...

    Authors: Ze Liu, Yingfeng Cai, Hai Wang and Long Chen
    Citation: Chinese Journal of Mechanical Engineering 2021 34:117
  34. The thermo-mechanical reliability of IMCs (Ni3Sn4, Cu3Sn, Cu6Sn5) solder joints and Sn-3.9Ag-0.6Cu solder joints was investigated systematically in 3D chip stacking structure subjected to an accelerated thermal c...

    Authors: Liang Zhang, Weimin Long and Sujuan Zhong
    Citation: Chinese Journal of Mechanical Engineering 2021 34:115
  35. A high-precision evaluation of ultrasonic detection sensitivity for a micro-crack can be restricted by a corroded rough surface when the surface microtopography is of the same order of magnitude as the crack d...

    Authors: Zhe Wang, Zhichao Fan, Xuedong Chen, Yihua Kang, Jingwei Cheng and Wei Chen
    Citation: Chinese Journal of Mechanical Engineering 2021 34:114
  36. The current research of the Q-P and Q-P-T process has been focused on controlling the heating temperature and holding time, or adding alloy elements into the steel to induce precipitation strengthening and imp...

    Authors: Yan Peng, Caiyi Liu and Ningning Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:113
  37. Deep learning has become an extremely popular method in recent years, and can be a powerful tool in complex, prior-knowledge-required areas, especially in the field of biomedicine, which is now facing the prob...

    Authors: Bin Zhang, Xue Zhou, Yichen Luo, Hao Zhang, Huayong Yang, Jien Ma and Liang Ma
    Citation: Chinese Journal of Mechanical Engineering 2021 34:112
  38. New materials and manufacturing technologies require applicable non-destructive techniques for quality assurance so as to achieve better performance. This study comprehensively investigated the effect of influ...

    Authors: Sai Guo, Guanhui Ren and Bi Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:111
  39. The existing engineering empirical life analysis models are not capable of considering the constitutive behavior of materials under contact loads; as a consequence, these methods may not be accurate to predict...

    Authors: Aodi Yu, Hong-Zhong Huang, Yan-Feng Li, He Li and Ying Zeng
    Citation: Chinese Journal of Mechanical Engineering 2021 34:110
  40. Although there are methods for testing the stress-strain relation and strength, which are the most fundamental and important properties of metallic materials, their application to small-volume materials and tu...

    Authors: Guangzhao Han, Lixun Cai, Chen Bao, Bo Liang, Yang Lyu, Maobo Huang and Xiaokun Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:109
  41. The cast aluminum beam is a key structure for carrying the body-hung traction motor of a high-speed train; its fatigue property is fundamental for predicting the residual life and service mileage of the struct...

    Authors: Weiyuan Dou, Lele Zhang, Haifeng Chang, Haifeng Zhang and Changqing Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:108
  42. This paper introduces a pneumatic finger cylinder servo control system for medical grabbing. First, according to the physical structure of the proportional directional valve and the pneumatic cylinder, the sta...

    Authors: Yeming Zhang, Kaimin Li, Meng Xu, Junlei Liu and Hongwei Yue
    Citation: Chinese Journal of Mechanical Engineering 2021 34:107
  43. Load-sensing steering systems for articulated loaders are prone to large pressure shocks and oscillations during steering operations, affecting the system stability. An optimized structure of the redirector wi...

    Authors: Yuqi Wang, Xinhui Liu, Jinshi Chen and Dongyang Huo
    Citation: Chinese Journal of Mechanical Engineering 2021 34:106
  44. The maximum delivery pressure and the maximum rotational speed determine the power density of axial piston pumps. However, increasing the speed beyond the limit always accompanies cavitation, leading to the de...

    Authors: Yu Fang, Junhui Zhang, Bing Xu, Zebing Mao, Changming Li, Changsheng Huang, Fei Lyu and Zhimin Guo
    Citation: Chinese Journal of Mechanical Engineering 2021 34:105

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics