Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 8 of 17

  1. Sheet-bulk metal forming (SBMF) is a promising process for manufacturing complex sheet components with functional elements. In this study, the entire forming process for a typical thin-walled component with ex...

    Authors: Xincun Zhuang, Meile Liang, Shengfa Zhu, Yin Zhu and Zhen Zhao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:138
    Content type: Original Article Published on:

  2. Vertical picking method is a predominate method used to harvest cotton crop. However, a vertical picking method may cause spindle bending of the cotton picker if spindles collide with stones on the cotton fiel...

    Authors: Xingzheng Chen, Congbo Li, Rui Hu, Ning Liu and Chi Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:136
    Content type: Original Article Published on:

  3. To improve the ride comfort and safety of a traditional adaptive cruise control (ACC) system when the preceding vehicle changes lanes, it proposes a target vehicle selection algorithm based on the prediction o...

    Authors: Jun Yao, Guoying Chen and Zhenhai Gao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:135
    Content type: Original Article Published on:

  4. Joining metal to plastic can lighten weight of products to reduce energy consumption. However, it is difficult to achieve high-strength welding between metal and plastic. To address this problem, the methods o...

    Authors: Jia Liu, Yuchi Dai, Yan Shi, Wenfu Cui and Tao Jiang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:134
    Content type: Original Article Published on:

  5. Planning and decision-making technology at intersections is a comprehensive research problem in intelligent transportation systems due to the uncertainties caused by a variety of traffic participants. As wirel...

    Authors: Shen Li, Keqi Shu, Chaoyi Chen and Dongpu Cao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:133
    Content type: Review Published on:

  7. In modern fossil and nuclear power plants, the components are subjected to creep, fatigue, and creep-fatigue (CF) due to frequent start-up and shut-down operations at high temperatures. The CF interaction on t...

    Authors: Yuxuan Song, Yi Ma, Zhouxin Pan, Yuebing Li, Taihua Zhang and Zengliang Gao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:131
    Content type: Original Article Published on:

  8. The hot or cold processing would induce the change and the inhomogeneous of the material mechanical properties in the local processing region of the structure, and it is difficult to obtain the specific mechan...

    Authors: He Xue, Jinxuan He, Jianlong Zhang and Yuxuan Xue
    Citation: Chinese Journal of Mechanical Engineering 2021 34:130
    Content type: Original Article Published on:

  10. The penetration of CaO–MgO–Al2O3–SiO2 (CMAS) is one of the most significant factors that induce the failure of air-plasma-sprayed thermal barrier coatings (APS TBCs). The direct penetration of CMAS changes the th...

    Authors: Zhenwei Cai, Zifan Zhang, Yingzheng Liu, Xiaofeng Zhao and Weizhe Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:128
    Content type: Original Article Published on:

  11. A successive tooth forming process for producing large modulus spur gears (m>2.5 mm) is firstly proposed in this paper to break the restrictions of large forming load and large equipment structure of traditional ...

    Authors: Yao Lin, Tao Wu and Guangchun Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:127
    Content type: Original Article Published on:

  12. Sandwich structures possess a high bending stiffness compared to monolithic structures with a similar weight. This makes them very suitable for lightweight applications, where high stiffness to weight ratios a...

    Authors: M. Nuño, J. Bühring, M. N. Rao and K. -U. Schröder
    Citation: Chinese Journal of Mechanical Engineering 2021 34:126
    Content type: Original Article Published on:

  14. Sea wave energy generators or converters (WECs) have the potential to become a viable technology for clean, renewable energy production. Among the WEC technologies, the oscillating water columns (OWCs) are the...

    Authors: Mohammad Shalby, Ahmed Elhanafi, Paul Walker, David G. Dorrell, Ahmad Salah and Mohamed R. Gomaa
    Citation: Chinese Journal of Mechanical Engineering 2021 34:124
    Content type: Original Article Published on:

  15. Oral inhalation of aerosolized drugs has be widely applied in healing the affected body organs including lesions of the throat and lungs and it is more efficient than those conventional therapies, such as intr...

    Authors: Qiufeng Yan, Wanting Sun, Lei Zhang, Hongmei Wang and Jianhui Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:123
    Content type: Original Article Published on:

  16. The tribological properties of cylinder block/valve plate is an important consideration in the design of axial piston pump. The effect of materials and heat treatment on friction and wear properties has been s...

    Authors: Jiahai Huang, Zhenhua Dou, Zhenglei Wang, Long Quan and Linkai Niu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:122
    Content type: Original Article Published on:

  17. The singularity problem brings troubles to the design and application for the parallel mechanism. Currently, redundant actuation is one of the useful methods to solve this singularity problem. However, faced t...

    Authors: Chen Zhao, Jingke Song, Xuechan Chen, Ziming Chen and Huafeng Ding
    Citation: Chinese Journal of Mechanical Engineering 2021 34:121
    Content type: Original Article Published on:

  18. The momentum flow exchange between the impeller and side channel produces highly turbulent flows in side channel pumps. The turbulent flows feature complex patterns of vortex structures that are partly respons...

    Authors: Fan Zhang, Desmond Appiah, Ke Chen, Shouqi Yuan, Kofi Asamoah Adu-Poku and Lufeng Zhu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:120
    Content type: Original Article Published on:

  19. In the process of Wavelet Analysis, only the low-frequency signals are re-decomposed, and the high-frequency signals are no longer decomposed, resulting in a decrease in frequency resolution with increasing fr...

    Authors: Maohua Xiao, Wei Zhang, Kai Wen, Yue Zhu and Yilidaer Yiliyasi
    Citation: Chinese Journal of Mechanical Engineering 2021 34:119
    Content type: Original Article Published on:

  20. Fatigue performance is a serious concern for mechanical components subject to cyclical stresses, particularly where safety is paramount. The fatigue performance of components relies closely on their surface in...

    Authors: Guoliang Liu, Chuanzhen Huang, Bin Zhao, Wei Wang and Shufeng Sun
    Citation: Chinese Journal of Mechanical Engineering 2021 34:118
    Content type: Review Published on:

  21. Radar and LiDAR are two environmental sensors commonly used in autonomous vehicles, Lidars are accurate in determining objects’ positions but significantly less accurate as Radars on measuring their velocities...

    Authors: Ze Liu, Yingfeng Cai, Hai Wang and Long Chen
    Citation: Chinese Journal of Mechanical Engineering 2021 34:117
    Content type: Original Article Published on:

  23. The thermo-mechanical reliability of IMCs (Ni3Sn4, Cu3Sn, Cu6Sn5) solder joints and Sn-3.9Ag-0.6Cu solder joints was investigated systematically in 3D chip stacking structure subjected to an accelerated thermal c...

    Authors: Liang Zhang, Weimin Long and Sujuan Zhong
    Citation: Chinese Journal of Mechanical Engineering 2021 34:115
    Content type: Original Article Published on:

  24. A high-precision evaluation of ultrasonic detection sensitivity for a micro-crack can be restricted by a corroded rough surface when the surface microtopography is of the same order of magnitude as the crack d...

    Authors: Zhe Wang, Zhichao Fan, Xuedong Chen, Yihua Kang, Jingwei Cheng and Wei Chen
    Citation: Chinese Journal of Mechanical Engineering 2021 34:114
    Content type: Original Article Published on:

  25. The current research of the Q-P and Q-P-T process has been focused on controlling the heating temperature and holding time, or adding alloy elements into the steel to induce precipitation strengthening and imp...

    Authors: Yan Peng, Caiyi Liu and Ningning Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:113
    Content type: Original Article Published on:

  26. Deep learning has become an extremely popular method in recent years, and can be a powerful tool in complex, prior-knowledge-required areas, especially in the field of biomedicine, which is now facing the prob...

    Authors: Bin Zhang, Xue Zhou, Yichen Luo, Hao Zhang, Huayong Yang, Jien Ma and Liang Ma
    Citation: Chinese Journal of Mechanical Engineering 2021 34:112
    Content type: Review Published on:

  27. New materials and manufacturing technologies require applicable non-destructive techniques for quality assurance so as to achieve better performance. This study comprehensively investigated the effect of influ...

    Authors: Sai Guo, Guanhui Ren and Bi Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:111
    Content type: Original Article Published on:

  28. The existing engineering empirical life analysis models are not capable of considering the constitutive behavior of materials under contact loads; as a consequence, these methods may not be accurate to predict...

    Authors: Aodi Yu, Hong-Zhong Huang, Yan-Feng Li, He Li and Ying Zeng
    Citation: Chinese Journal of Mechanical Engineering 2021 34:110
    Content type: Original Article Published on:

  29. Although there are methods for testing the stress-strain relation and strength, which are the most fundamental and important properties of metallic materials, their application to small-volume materials and tu...

    Authors: Guangzhao Han, Lixun Cai, Chen Bao, Bo Liang, Yang Lyu, Maobo Huang and Xiaokun Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:109
    Content type: Original Article Published on:

  30. The cast aluminum beam is a key structure for carrying the body-hung traction motor of a high-speed train; its fatigue property is fundamental for predicting the residual life and service mileage of the struct...

    Authors: Weiyuan Dou, Lele Zhang, Haifeng Chang, Haifeng Zhang and Changqing Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:108
    Content type: Original Article Published on:

  31. This paper introduces a pneumatic finger cylinder servo control system for medical grabbing. First, according to the physical structure of the proportional directional valve and the pneumatic cylinder, the sta...

    Authors: Yeming Zhang, Kaimin Li, Meng Xu, Junlei Liu and Hongwei Yue
    Citation: Chinese Journal of Mechanical Engineering 2021 34:107
    Content type: Original Article Published on:

  32. Load-sensing steering systems for articulated loaders are prone to large pressure shocks and oscillations during steering operations, affecting the system stability. An optimized structure of the redirector wi...

    Authors: Yuqi Wang, Xinhui Liu, Jinshi Chen and Dongyang Huo
    Citation: Chinese Journal of Mechanical Engineering 2021 34:106
    Content type: Original Article Published on:

  33. The maximum delivery pressure and the maximum rotational speed determine the power density of axial piston pumps. However, increasing the speed beyond the limit always accompanies cavitation, leading to the de...

    Authors: Yu Fang, Junhui Zhang, Bing Xu, Zebing Mao, Changming Li, Changsheng Huang, Fei Lyu and Zhimin Guo
    Citation: Chinese Journal of Mechanical Engineering 2021 34:105
    Content type: Original Article Published on:

  34. Deformation of the flexspline is the basis of analyzing tooth trajectory and designing tooth profile. Considering the tooth influence on the position of equivalent neutral layer, a piecewise method for calcula...

    Authors: Yunpeng Yao, Xiaoxia Chen, Jingzhong Xing, Liteng Shi and Yuqi Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:104
    Content type: Original Article Published on:

  35. The low cycle fatigue strength properties of the additively manufactured Ti-6Al-4V alloy are experimentally investigated under proportional and nonproportional multiaxial loading. The fatigue tests were conduc...

    Authors: Yuya Kimura, Fumio Ogawa and Takamoto Itoh
    Citation: Chinese Journal of Mechanical Engineering 2021 34:103
    Content type: Original Article Published on:

  36. This study proposes and experimentally validates an optimal integrated system to control the automotive continuously variable transmission (CVT) by Model Predictive Control (MPC) to achieve its expected transm...

    Authors: Ling Han, Hui Zhang, Ruoyu Fang and Hongxiang Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:102
    Content type: Original Article Published on:

  37. Most of traditional traveling wave piezoelectric transducers are driven by two phase different excitation signals, leading to a complex control system and seriously limiting their applications in industry. To ...

    Authors: Liang Wang, Fushi Bai, Viktor Hofmann, Jiamei Jin and Jens Twiefel
    Citation: Chinese Journal of Mechanical Engineering 2021 34:101
    Content type: Original Article Published on:

  40. Advanced mathematical tools are used to conduct research on the kinematics analysis of hybrid mechanisms, and the generalized analysis method and concise kinematics transfer matrix are obtained. In this study,...

    Authors: Peng Sun, Yanbiao Li, Ke Chen, Wentao Zhu, Qi Zhong and Bo Chen
    Citation: Chinese Journal of Mechanical Engineering 2021 34:98
    Content type: Original Article Published on:

  41. Buried pipelines are an essential component of the urban infrastructure of modern cities. Traditional buried pipes are mainly made of metal materials. With the development of material science and technology in...

    Authors: Liang Ge, Changpeng Zhang, Guiyun Tian, Xiaoting Xiao, Junaid Ahmed, Guohui Wei, Ze Hu, Ju Xiang and Mark Robinson
    Citation: Chinese Journal of Mechanical Engineering 2021 34:97
    Content type: Review Published on:

  42. A coupling dynamic model of a subway train and an embedded track is established to study the safety limits of track irregularities. The simulated vehicle system was a 74-degrees of freedom multi-rigid body mod...

    Authors: Yuxiang Zhang, Jian Han, Huilai Song and Yu Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:96
    Content type: Original Article Published on:

  43. A decrease in the weight of aerospace vehicles, large ships, weapons, and high-speed trains will increase the demand for wide-width magnesium alloy plates and their composite parts to replace steel and plastic...

    Authors: Chenchen Zhi, Lifeng Ma, Weitao Jia, Pengtao Liu, Qichi Le, Zhiquan Huang and Tingzhuang Han
    Citation: Chinese Journal of Mechanical Engineering 2021 34:95
    Content type: Original Article Published on:

  44. The spherical indentation test has been successfully applied to inversely derive the tensile properties of small regions in a non-destructive way. Current inverse methods mainly rely on extensive iterative cal...

    Authors: Guoyao Chen, Xiaocheng Zhang, Jiru Zhong, Jin Shi, Qiongqi Wang and Kaishu Guan
    Citation: Chinese Journal of Mechanical Engineering 2021 34:94
    Content type: Original Article Published on:

  45. In recent years, addressing ill-posed problems by leveraging prior knowledge contained in databases on learning techniques has gained much attention. In this paper, we focus on complete three-dimensional (3D) ...

    Authors: Peng Jin, Shaoli Liu, Jianhua Liu, Hao Huang, Linlin Yang, Michael Weinmann and Reinhard Klein
    Citation: Chinese Journal of Mechanical Engineering 2021 34:93
    Content type: Original Article Published on:

  46. Nickel-based alloy coatings were widely used for the remanufacturing of dies and moulds by laser cladding, but the crack sensitivity would be increase due to the higher strength and hardness, which reduced the...

    Authors: Zhenglei Yu, Lunxiang Li, Deqiang Zhang, Guangfeng Shi, Guang Yang, Zezhou Xu and Zhihui Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:92
    Content type: Original Article Published on:

  47. In hydraulic area, independent metering control (IMC) technology is an effective approach to improve system efficiency and control flexibility. In addition, digital hydraulic technology (DHT) has been verified...

    Authors: Qi Zhong, Huiming Bao, Yanbiao Li, Haocen Hong, Bin Zhang and Huayong Yang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:91
    Content type: Original Article Published on:

  48. At present, there are many studies on the residual stress field and plastic strain field introduced by surface strengthening, which can well hinder the initiation of early fatigue cracks and delay the propagat...

    Authors: Ning Wang, Jinlong Zhu, Bai Liu, Xiancheng Zhang, Jiamin Zhang and Shantung Tu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:90
    Content type: Original Article Published on:

  49. Researchers have recently attempted to monitor pool oscillations using the three-dimensional laser vision method. However, the deficiency of simulation software will result in significant capital expenditure. ...

    Authors: Xingpei Wu, Jiankang Huang, Jing He, Shien Liu, Guangyin Liu and Ding Fan
    Citation: Chinese Journal of Mechanical Engineering 2021 34:89
    Content type: Original Article Published on:

  50. This paper presents a novel neural-fuzzy-based adaptive sliding mode automatic steering control strategy to improve the driving performance of vision-based unmanned electric vehicles with time-varying and unce...

    Authors: Jinghua Guo, Keqiang Li, Jingjing Fan, Yugong Luo and Jingyao Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:88
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)