Table 7 Parameters for simulation process
From: Optimization and Simulation of Plastic Injection Process using Genetic Algorithm and Moldflow
Parameter | Value | Unit |
|---|---|---|
Melting temperature T M | 180 | °C |
Ejection temperature T E | 120 | °C |
Mold wall temperature T W | 50 | °C |
Injection pressure P inj | 20 | MPa |
Holding pressure P hold | 16 | MPa |
Holding time t hold | 8 | s |
Velocity of cooling water u | 1 | m/s |
Cooling water temperature T water | 25 | °C |
Mold opening time t o | 5 | s |
Reynold number Re | 2500 | |
Ambient temperature T e | 30 | °C |