Table 2 Tool parameters
From: A Model for Predicting Dynamic Cutting Forces in Sand Mould Milling with Orthogonal Cutting
Parameter | Value |
|---|---|
Rake angle γ0 (°) | 0 |
Teeth number | 2 |
Radius of cutter R (mm) | 8 |
Helical angle (°) | 0 |
Flank angle α0 (°) | 20 |
From: A Model for Predicting Dynamic Cutting Forces in Sand Mould Milling with Orthogonal Cutting
Parameter | Value |
|---|---|
Rake angle γ0 (°) | 0 |
Teeth number | 2 |
Radius of cutter R (mm) | 8 |
Helical angle (°) | 0 |
Flank angle α0 (°) | 20 |