Table 3 Milling parameters
From: A Model for Predicting Dynamic Cutting Forces in Sand Mould Milling with Orthogonal Cutting
Milling condition | Test number | |||
|---|---|---|---|---|
Test A | Test B | Test C | Test D | |
ap (mm) | 3 | 3 | 3 | 5 |
n (r/min) | 6000 | 6000 | 9000 | 6000 |
vX (mm/s) | 100 | 160 | 100 | 100 |
ae (mm) | 14.4 | 14.4 | 14.4 | 14.4 |