Skip to main content

Table 5. Simulation result of the average contact force of the workpiece at different positions at v = 100 r/min F(N)

From: Amending Research on the Expression of the Contact Force of the Spindle Barrel Finishing Based on EDEM Simulation

z (mm) x (mm)
40 55 70 85
55 0.7242 1.0036 1.5570 2.0001
70 0.5562 0.8599 1.3852 1.7368
85 0.3386 0.7020 1.1249 1.3708
100 0.2177 0.3919 1.1006 1.0056
115 0.1333 0.2815 0.5223 0.8218