Chinese Journal of Mechanical Engineering

Table 8. Simulation results of the average contact force of workpiece at different positions at v = 60 r/min F(N)

From: Amending Research on the Expression of the Contact Force of the Spindle Barrel Finishing Based on EDEM Simulation

z (mm)	x (mm)
z (mm)	40	55	70	85
55	0.6187	0.9017	1.0938	1.5271
70	0.4418	0.8017	0.9931	1.3071
85	0.3684	0.6396	0.8503	0.9638
100	0.2915	0.4914	0.6231	0.8019
115	0.2403	0.2762	0.3328	0.5329

Back to article page