Skip to main content

Table 3 Experimental parameters in dry turning of MCI

From: High-Speed Machining of Malleable Cast Iron by Various Cutting Tools Coated by Physical Vapor Deposition

Cutting parameters Cutting speed, v (m/min) Feed rate, f (mm/rev) Depth of cut, ap (mm)
Cutting speed v 50, 100, 150, 200, 250 0.2 0.9
Depth of cut ap 150 0.15 0.3, 0.6, 0.9, 1.2, 1.5
Feed rate f 150 0.05, 0.1, 0.15, 0.2, 0.25 0.9
Cutting tools PVD thick TiN/TiAlN coated tool, PVD thin TiN/TiAlN coated tool, PVD nc-TiAlSiN coated tool