Table 8 Microhardness variation of machined surfaces with feed rate
From: Experimental Research on the Surface Quality of Milling Contour Bevel Gears
Feed rate (mm/r) | 0.1 | 0.2 | 0.3 | |||
|---|---|---|---|---|---|---|
Convex | Convace | Convex | Convace | Convex | Convace | |
Hardness value (HV) | 175.3 | 176.1 | 179.7 | 182.1 | 183.3 | 185.4 |