Experimental Study on the Reduction Effect of Pit Texture on Disassembly Damage for Interference Fit

Chinese Journal of Mechanical Engineering

Table 6 Values and the ordinal number of indexes for the 5 levels of Factor C

The mean values \(\overline{{K_{i} }}\) of Q come from the data of Table 3
The mean values \(\overline{{K_{i} }}\) of S_n and S_m are calculated according the data with the same level of Factor C in Table 5
P_{>200 MPa-R} is the area ratio of the surface contact pressure greater than 200 MPa on the surface of texture units under 100 MPa load, and these units’ texture surface density is 30% and the equivalent circle diameter is 100 μm
P_min-V is the minimum contact pressure on the surface of texture units under 100 MPa load, and these units’ texture surface density is 30% and the equivalent circle diameter is 100 μm