Table 1 Boundary conditions
From: Simulation and Experimental Research on Liquid Spreading in a Wire-Sawn Kerf
Zone | Setting |
|---|---|
Inlet | Area: 9 mm2, Velocity-inlet: \(v_{0}\)= 0.1−1.6 m/s |
Outlet | Pressure-outlet, gauge pressure: 0 |
Outer ingot wall | \(K_{s}\)=0.001 mm |
Inner kerf wall | \(K_{s}\)=0.005 mm |
Kerf surface | \(K_{s}\)=0.030 mm |