- Published:
Stabilizing mechanism and running behavior of couplers on heavy haul trains
Chinese Journal of Mechanical Engineering volume 27, pages 1211–1218 (2014)
Abstract
Published studies in regard to coupler systems have been mainly focused on the manufacturing process or coupler strength issues. With the ever increasing of tonnage and length of heavy haul trains, lateral in-train forces generated by longitudinal in-train forces and coupler rotations have become a more and more significant safety issue for heavy haul train operations. Derailments caused by excessive lateral in-train forces are frequently reported. This article studies two typical coupler systems used on heavy haul locomotives. Their structures and stabilizing mechanism are analyzed before the corresponding models are developed. Coupler systems models are featured by two distinct stabilizing mechanism models and draft gear models with hysteresis considered. A model set which consists of four locomotives and three coupler systems is developed to study the rotational behavior of different coupler systems and their implications for locomotive dynamics. Simulated results indicate that when the locomotives are equipped with the type B coupler system, locomotives can meet the dynamics standard on tangent tracks; while the dynamics performance on curved tracks is very poor. The maximum longitudinal in-train force for locomotives equipped with the type B coupler system is 2000 kN. Simulations revealed a distinct trend for the type A coupler system. Locomotive dynamics are poorer for the type A case when locomotives are running on tangent tracks, while the dynamics are better for the type A case when locomotives are running on curved tracks. Theoretical studies and simulations carried out in this article suggest that a combination of the two types of stabilizing mechanism can result in a good design which can significantly decrease the relevant derailments.
References
Canadian National. Railway investigation report of derailment[R]. Rep. R02C0050.TSB Canada, 2002.
WANG Kaiyun, ZHAI Wanming, FENG Quanbao, et al. Effect of the coupler free angle on wheel/rail dynamic safety performance of heavy haul locomotive[J]. China Railway Science, 2009, 30(6): 72–76. (in Chinese)
CHEN D. Derailment risk due to coupler jack-knifing under longitudinal buff force[J]. Journal of Rail and Rapid Transit, 2010, 224(363): 483–490.
LI Gu. The summary report of experiments for the type HXD2 locomotive equipped with type DFC-E100 coupler system[R]. Research Report of China Academy of Railway Sciences (CARS), No. 2008-JL-36, Beijing, July 2008. (in Chinese)
NASR A, MOHAMMADI S. The effects of train brake delay time on in-train forces[J]. Journal of Rail and Rapid Transit, 2007, 224(306): 523–534.
IWNICKI S. Handbook of railway vehicle dynamics[M]. CRC Press, Taylor & Francis Group, Boca Raton, FL, 2006.
EL-SIBAIE M. Recent advancements in buff and draft testing techniques [C]//Fifth International Heavy Haul Conference, Bejing, China, 1993: 115–119.
COLE C, SUN Y Q. Simulated comparisons of wagon coupler systems in heavy haul trains[J]. Journal of Rail and Rapid Transit, 2006, 220(35): 257–256.
COLE C, McCLANACHAN M, SPIRYAGIN M, et al. Wagon instability in long trains[J]. Vehicle System Dynamic Supplement, 2012, 50: 303–317.
LUO Ren, ZENG Jing. Hunting stability analysis of train system and comparison with single vehicle model[J]. Journal of Mechanical Engineering, 2008, 44(4): 184–188. (in Chinese)
LUO Shihui, FENG Quanbao, YANG Junjie. Research on dynamics of the HXD2 heavy locomotive bearing longitudinal compressive strength[J]. Railway Locomotive & Car, 2008, 28: 145–149. (in Chinese)
MA Weihua, LUO Shuihui, SONG Rongrong. Coupler dynamic performance analysis of heavy haul locomotives[J]. Vehicle System Dynamic, 2012, 50(9): 1–19.
XU Ziqiang, LUO Shihui, MA Weihua. Dynamics properties of 2B0 heavy haul locomotive based on longitudinal stress[J]. Journal of Traffic and Transportation Engineering, 2009, 9(3): 49–53. (in Chinese)
XU Ziqiang, MA Weihua, WU Qing, et al. Coupler rotation behaviour and its effect on heavy haul trains[J]. Vehicle System Dynamic, 2013, 51: 1817–1838.
XU Ziqiang, MA Weihua, WU Qing, et al. Analysis of the rotation angle of a coupler used on heavy haul locomotives[J/OL]. Journal of Rail and Rapid Transit, 2013, 8.
WU Qing, LUO Shihui, WEI Chongfeng, et al. Dynamics simulation models of coupler systems for freight locomotive[J]. Journal of Traffic and Transportation Engineering, 2012, 12(3): 37–43.
WU Qing, LUO Shihui, XU Ziqiang, et al. Coupler jackknifing and derailments of locomotives on tangent track[J]. Vehicle System Dynamic, 2013, 51(11): 1784–1800.
ANSARI M, ESMAIZADEH E, YOUNESIAN D. Longitudinal dynamics of freight train[J]. International Journal of Heavy Vehicle Systems, 2009, 16: 102–131.
NASR A, MOHAMMANDI S. The effects of train brake delay time on in-train forces[J]. Journal of Rail Rapid Transit, 2010, 6(224): 523–534.
DIANA G, BELFORTE P, CHELI F, et al. Numerical and experimental investigation of heavy freight train dynamic[C]//2007 ASME International Mechanical Engineering Congress and Exposition, Seattle, Washington, 2007, 16: 1–10.
BELFORTE P, CHEL F I, DIANA G, et al. Numerical and experimental approach for the evaluation of severe longitudinal dynamics of heavy freight trains[J]. Vehicle System Dynamic, 2008, 46: 937–955.
ZHANG Suohuai, MENG Xu. Nonlinear impacting dynamic model of a metro vehicle[J]. Journal of Mechanical Engineering, 2012, 48(9): 111–116. (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by National Basic Research Program of China (973 Program, Grant No. 2001CB711104), National Natural Science Foundation of China (Grant No. 51005190), and Fok Ying Tung Education Foundation of China (Grant No. 122014)
XU Ziqiang, born in 1984, PhD. He works at Locomotive and Car Research Institute, China Academy of Railway Sciences. He received his bachelor degree from Huazhong University of Science and Technology, China, in 2003, and his PhD degree from Traction Power State Key Laboratory, Southwest Jiaotong University, China, in 2013. His research interests include railway vehicle dynamics and safety, heavy haul train dynamics, high speed train dynamic simulation.
WU Qing, born in 1987, is currently a PhD candidate at Centre for Railway Engineering, Central Queensland University, Australia. He received his bachelor and master degree from Southwest Jiaotong University, China. His research interests include railway vehicle dynamics, train longitudinal dynamics, friction draft gear simulation.
LUO Shihui, born in 1964, is a professor and a doctoral tutor at Traction Power State Key Laboratory, Southwest Jiaotong University, China. He received his PhD degree from Shanghai Jiaotong Universtiy, China, in 1984. His research interests include railway vehicle design, railway vehicle dynamics and application.
MA Weihua, born in 1979, is an associate professor at Traction Power State Key Laboratory, Southwest Jiaotong University, China. He receive his PhD degree from Southwest Jiaotong University, China, in 2008. His research interests include railway vehicle dynamics, vibration and wheel/rail contact.
DONG Xiaoqing, born in 1975, is an associate researcher at Locomotive and Car Research Institute, China Academy of Railway Science. He received his master degree from Beijing Jiaotong University, China. His research interests include railway vehicle dynamics, vibration and wheel/rail contact.
Rights and permissions
About this article
Cite this article
Xu, Z., Wu, Q., Luo, S. et al. Stabilizing mechanism and running behavior of couplers on heavy haul trains. Chin. J. Mech. Eng. 27, 1211–1218 (2014). https://doi.org/10.3901/CJME.2014.0905.146
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3901/CJME.2014.0905.146