Skip to main content
Chinese Journal of Mechanical Engineering
Download PDF

Erratum to: High-efficiency approach for fabricating MTE rotor by micro-EDM and microextrusion

Chinese Journal of Mechanical Engineering (2014)Cite this article

The Original Article was published on 25 July 2014

Author information

Affiliations

  1. School of Mechanical Engineering, Harbin Institute of Technology, Harbin, 150001, China

    Xuesong Geng, Guanxin Chi, Yukui Wang & Zhenlong Wang

  2. Key Laboratory of Micro-systems and Micro-structures Manufacturing, Ministry of Education, Harbin Institute of Technology, Harbin, 150001, China

    Zhenlong Wang

Authors
  1. Xuesong Geng
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Guanxin Chi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Yukui Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Zhenlong Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Zhenlong Wang.

Additional information

Supported by National Basic Research Program of China (973 Program, Grant No. 2012CB934102), National Natural Science Foundation of China (Grant No. 50835002), and National Science Foundation for Young Scientists of China (Grant No. 51105111)

The online version of the original article can be found at http://dx.doi.org/10.3901/CJME.2014.0527.101

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Geng, X., Chi, G., Wang, Y. et al. Erratum to: High-efficiency approach for fabricating MTE rotor by micro-EDM and microextrusion. Chin. J. Mech. Eng. (2014). https://doi.org/10.3901/CJME.2014.1210.304

Download citation