Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 12 of 18

  1. Pandemics like COVID-19 have created a spreading and ever-higher healthy threat to the humans in the manufacturing system which incurs severe disruptions and complex issues to industrial networks. The intellig...

    Authors: Xingyu Li, Baicun Wang, Chao Liu, Theodor Freiheit and Bogdan I. Epureanu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:58
    Content type: Research highlight Published on:

  2. Nickel-cobalt/silicon carbide (Ni-Co/SiC) composite coatings were fabricated by supergravity field-enhanced electrodeposition. The surface morphology and the distribution of the SiC particles in the coatings w...

    Authors: Xiaoyun Hu and Ningsong Qu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:57
    Content type: Original Article Published on:

  4. Single point incremental forming (SPIF) is an innovative sheet forming process with a high economic pay-off. The formability in this process can be maximized by executing forming with a tool of specific small ...

    Authors: Hongyu Wei, G. Hussain, X. Shi, B. B. L Isidore, Mohammed Alkahtani and Mustufa Haider Abidi
    Citation: Chinese Journal of Mechanical Engineering 2020 33:55
    Content type: Original Article Published on:

  5. To avoid impacts and vibrations during the processes of acceleration and deceleration while possessing flexible working ways for cable-suspended parallel robots (CSPRs), point-to-point trajectory planning dema...

    Authors: Tao Zhao, Bin Zi, Sen Qian and Jiahao Zhao
    Citation: Chinese Journal of Mechanical Engineering 2020 33:54
    Content type: Original Article Published on:

  6. Pure iron is one of the difficult-to-machine materials due to its large chip deformation, adhesion, work-hardening, and built-up edges formation during machining. This leads to a large workpiece deformation an...

    Authors: Yinfei Yang, Lu Jin, Jinpeng Zhu, Jinxing Kong and Liang Li
    Citation: Chinese Journal of Mechanical Engineering 2020 33:53
    Content type: Original Article Published on:

  7. Current and displacement stiffness are important parameters of axial magnetic bearing (AMB) and are usually considered as constants for the control system. However, in actual dynamic work situations, time-vary...

    Authors: Jinji Sun, Wanting Wei, Jiqiang Tang and Chun-E Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:52
    Content type: Original Article Published on:

  8. State of charge (SOC) estimation for lithium ion batteries plays a critical role in battery management systems for electric vehicles. Battery fractional order models (FOMs) which come from frequency-domain mod...

    Authors: Jinpeng Tian, Rui Xiong, Weixiang Shen and Ju Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:51
    Content type: Original Article Published on:

  9. Current research of automatic transmission (AT) mainly focuses on the improvement of driving performance, and configuration innovation is one of the main research directions. However, finding new configuration...

    Authors: Huafeng Ding, Changwang Cai, Ziming Chen, Tao Ke and Bowen Mao
    Citation: Chinese Journal of Mechanical Engineering 2020 33:50
    Content type: Original Article Published on:

  10. Propulsion during push-off is the key to realizing human locomotion. Humans have evolved a way of walking with high energy utilization, but it can be further improved. Drawing inspiration from the muscle-tendo...

    Authors: Xiangyang Wang, Sheng Guo, Bojian Qu, Majun Song and Haibo Qu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:49
    Content type: Original Article Published on:

  11. Pipe belt conveyor is a new type of environmentally friendly and efficient bulk conveying equipment. In the design of the roller, the belt and the driving motor of pipe belt conveyor, the sag resistance is a k...

    Authors: Shuaiping Guo, Wei Huang and Xuejun Li
    Citation: Chinese Journal of Mechanical Engineering 2020 33:48
    Content type: Original Article Published on:

  13. Recent researches show that there are some anomalies, which are not satisfied with common sense, appearing in some special permutation flow shop scheduling problems (PFSPs). These anomalies can be divided into...

    Authors: Lin Gui, Liang Gao and Xinyu Li
    Citation: Chinese Journal of Mechanical Engineering 2020 33:46
    Content type: Original Article Published on:

  14. High strength steel products with good ductility can be produced via Q&P hot stamping process, while the phase transformation of the process is more complicated than common hot stamping since two-step quenchin...

    Authors: Yang Chen, Huizhen Zhang, Johnston Jackie Tang, Xianhong Han and Zhenshan Cui
    Citation: Chinese Journal of Mechanical Engineering 2020 33:45
    Content type: Original Article Published on:

  15. To study the characteristics of the 5-prismatic–spherical–spherical (PSS)/universal–prismatic–universal (UPU) parallel mechanism with elastically active branched chains, the dynamics modeling and solutions of ...

    Authors: Yanbiao Li, Hang Zheng, Bo Chen, Peng Sun, Zesheng Wang, Kun Shuai and Yi Yue
    Citation: Chinese Journal of Mechanical Engineering 2020 33:44
    Content type: Original Article Published on:

  16. The rapidly increasing demand and complexity of manufacturing process potentiates the usage of manufacturing data with the highest priority to achieve precise analyze and control, rather than using simplified ...

    Authors: Ke Xu, Yingguang Li, Changqing Liu, Xu Liu, Xiaozhong Hao, James Gao and Paul G. Maropoulos
    Citation: Chinese Journal of Mechanical Engineering 2020 33:43
    Content type: Review Published on:

  17. Solid particle erosion is a common phenomenon in engineering fields, such as manufacturing, energy, military and aviation. However, with the rising industrial requirements, the development of anti-solid partic...

    Authors: Shuaijun Zhang, Junqiu Zhang, Bin Zhu, Shichao Niu, Zhiwu Han and Luquan Ren
    Citation: Chinese Journal of Mechanical Engineering 2020 33:42
    Content type: Review Published on:

  18. The different conditions of use of a component result in a variety of damage levels. Therefore, excluding differences in shape and size, used parts show a high degree of uncertainty regarding failure character...

    Authors: Wenhao Huang, Zhigang Jiang, Teng Wang, Yan Wang and Xiaoli Hu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:41
    Content type: Original Article Published on:

  19. Hole drilling or contour milling for the large and complex workpieces such as automobile panels and aircraft fuselages makes a high combined demand on machining accuracy, stiffness and workspace of machining e...

    Authors: Nanyan Shen, Liang Geng, Jing Li, Fei Ye, Zhuang Yu and Zirui Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:40
    Content type: Original Article Published on:

  20. Thin-walled long stringer made of aluminum alloy 7050-T7451 is prone to deformation during transportation, so a research of residual stress relaxation was launched in this paper. The transport resonance stress...

    Authors: Yinfei Yang, Lu Jin, Jixing Du, Liang Li and Wei Yang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:39
    Content type: Original Article Published on:

  22. The aim of this paper is to study the effect of agitator’s types on the turbulent flows in stirred tanks without and with baffles. The hydrodynamics behavior induced by four different agitator’s types: a Rusht...

    Authors: Mohammed Foukrach, Mohamed Bouzit, Houari Ameur and Youcef Kamla
    Citation: Chinese Journal of Mechanical Engineering 2020 33:37
    Content type: Original Article Published on:

  23. ∆F-N curves are usually used to predict the fatigue life of spot welding in engineering, but they are time-consuming and laborious and not universal. For the purpose of predicting the fatigue life of spot weld...

    Authors: Yahang Qin, Shoune Xiao, Liantao Lu, Bing Yang, Xiangjie Li and Guangwu Yang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:36
    Content type: Original Article Published on:

  24. The torque–angle characteristics of electric–mechanical converters are important determinants of the quality of electrohydraulic proportional control systems. It is far more difficult for a rotary electric–mec...

    Authors: Bin Meng, Yongjiang Lai and Xinguo Qiu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:35
    Content type: Original Article Published on:

  25. Wet multi-plate clutches are relevant components of modern drivetrain applications, not only in terms of function but also safety and comfort. Especially at the beginning of their lifetime, distinct changes of...

    Authors: Katharina Voelkel, Hermann Pflaum and Karsten Stahl
    Citation: Chinese Journal of Mechanical Engineering 2020 33:34
    Content type: Original Article Published on:

  26. Selective laser melting (SLM) is an emerging additive manufacturing technology for fabricating aluminum alloys and aluminum matrix composites. Nevertheless, it remains unclear how to improve the properties of ...

    Authors: Yuxin Li, Dongdong Gu, Han Zhang and Lixia Xi
    Citation: Chinese Journal of Mechanical Engineering 2020 33:33
    Content type: Original Article Published on:

  27. Covering about three quarters of the surface area of the earth, the ocean is a critical source of sustenance, medicine, and commerce. However, such vast expanse in both surface area and depth, presents myriad ...

    Authors: Mingwei Lin and Canjun Yang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:32
    Content type: Review Published on:

  28. A novel metal matrix composite freeform fabrication approach, fiber traction printing (FTP), is demonstrated through controlling the wetting behavior between fibers and the matrix. This process utilizes the fi...

    Authors: Xin Wang, Xiaoyong Tian, Qin Lian and Dichen Li
    Citation: Chinese Journal of Mechanical Engineering 2020 33:31
    Content type: Original Article Published on:

  29. When saving energy in a pneumatic system, the problem of energy losses is usually solved by reducing the air supply pressure. The power-matching method is applied to optimize the air-supply pressure of the pne...

    Authors: Yeming Zhang, Hongwei Yue, Ke Li and Maolin Cai
    Citation: Chinese Journal of Mechanical Engineering 2020 33:30
    Content type: Original Article Published on:

  30. Electro-hydraulic control valves are key hydraulic components for industrial applications and aerospace, which controls electro-hydraulic motion. With the development of automation, digital technology, and com...

    Authors: Bing Xu, Jun Shen, Shihao Liu, Qi Su and Junhui Zhang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:29
    Content type: Review Published on:

  31. Fracture toughness property is of significant importance when evaluating structural safety. The current research of fracture toughness mainly focused on crack in homogeneous material and experimental results. ...

    Authors: Longfei Zhao, Chendong Shao, Yasuhito Takashima, Fumiyoshi Minami and Fenggui Lu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:27
    Content type: Original Article Published on:

  32. Oil leakage between the slipper and swash plate of an axial piston pump has a significant effect on the efficiency of the pump. Therefore, it is extremely important that any leakage can be predicted. This stud...

    Authors: Özkan Özmen, Cem Sinanoğlu, Abdullah Caliskan and Hasan Badem
    Citation: Chinese Journal of Mechanical Engineering 2020 33:28
    Content type: Original Article Published on:

  33. There is a consensus in the aerospace field that the development of reusable liquid rockets can effectively reduce the launch expense. The pursuit of a long service life and reutilization highly depends on the...

    Authors: Jimin Xu, Changhuan Li, Xusheng Miao, Cuiping Zhang and Xiaoyang Yuan
    Citation: Chinese Journal of Mechanical Engineering 2020 33:26
    Content type: Review Published on:

  34. The interface between the slipper/swash plate is one of the most important frication pairs in axial piston pumps. The test of this interface in a real pump is very challenging. In this paper, a novel pump prot...

    Authors: Junjie Zhou, Jichen Zhou and Chongbo Jing
    Citation: Chinese Journal of Mechanical Engineering 2020 33:25
    Content type: Original Article Published on:

  35. An equivalent mechanical model with the equivalent physical meaning of mass-spring-damping is proposed for cylindrical lithium-ion batteries through experiments and theory. The equivalent mechanical model of a...

    Authors: Wenwei Wang, Yiding Li, Cheng Lin and Sheng Yang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:23
    Content type: Original Article Published on:

  36. In the robotic welding process with thick steel plates, laser vision sensors are widely used to profile the weld seam to implement automatic seam tracking. The weld seam profile extraction (WSPE) result is a c...

    Authors: Yinshui He, Zhuohua Yu, Jian Li, Lesheng Yu and Guohong Ma
    Citation: Chinese Journal of Mechanical Engineering 2020 33:21
    Content type: Original Article Published on:

  37. A honeycomb structure is widely used in sandwich structure components in aeronautics and astronautics; however, machining is required to reveal some of its features. In honeycomb structures, deficiencies, such...

    Authors: Yongqing Wang, Yongquan Gan, Haibo Liu, Lingsheng Han, Jinyu Wang and Kuo Liu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:20
    Content type: Original Article Published on:

  38. To assist an amputee in regaining his or her daily quality of life, based on analysis of the motion characteristics of the human hip, a 2-UPR/URR parallel mechanism with a passive limb was designed. The inverse k...

    Authors: Majun Song, Sheng Guo, Xiangyang Wang and Haibo Qu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:17
    Content type: Original Article Published on:

  39. Most gear fault diagnosis (GFD) approaches suffer from inefficiency when facing with multiple varying working conditions at the same time. In this paper, a non-negative matrix factorization (NMF)-theoretic co-...

    Authors: Fei Shen, Chao Chen, Jiawen Xu and Ruqiang Yan
    Citation: Chinese Journal of Mechanical Engineering 2020 33:16
    Content type: Original Article Published on:

  40. Taylor–Couette–Poiseuille (TCP) flow dominates the inner water-cooling circulation of canned motor reactor coolant pumps. Current research on TCP flow focuses on torque behaviors and flow regime transitions th...

    Authors: Shengde Wang, Zhenqiang Yao and Hong Shen
    Citation: Chinese Journal of Mechanical Engineering 2020 33:14
    Content type: Original Article Published on:

  41. Parallel Kinematic Machines (PKMs) are being widely used for precise applications to achieve complex motions and variable poses for the end effector tool. PKMs are found in medical, assembly and manufacturing ...

    Authors: Mervin Joe Thomas, M. L. Joy and A. P. Sudheer
    Citation: Chinese Journal of Mechanical Engineering 2020 33:13
    Content type: Original Article Published on:

  42. This article reviews the status of thermomechanical analysis of the friction stir welding (FSW) process for establishing guidelines for further investigation, filling the available research gaps, and expanding...

    Authors: Bahman Meyghani and Chuansong Wu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:12
    Content type: Review Published on:

  43. Bolts are important fasteners indispensable in the manufacturing field for their advantages, which include convenient assembly and disassembly, easy maintenance, refastenability to prevent looseness, and the a...

    Authors: Qinxue Pan, Ruipeng Pan, Chang Shao, Meile Chang and Xiaoyu Xu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:11
    Content type: Review Published on:

  44. The current automatic scallion-transplanting machine is a complicated mechanism composed of two linkage mechanisms and two band carriers. It delivers seedlings inefficiently because of the movement limitations...

    Authors: Xiong Zhao, Jun Ye, Mengyan Chu, Li Dai and Jianneng Chen
    Citation: Chinese Journal of Mechanical Engineering 2020 33:10
    Content type: Original Article Published on:

  45. Excitation parameter preferences are key factors affecting the performance of magnetic frequency mixing detection. A uniform experimental design method was used to analyze this influence. Using fuzzy theory, a...

    Authors: Yu Chang, Jingpin Jiao, Xiucheng Liu, Guanghai Li, Cunfu He and Bin Wu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:9
    Content type: Original Article Published on:

  46. According to statistic data, machinery faults contribute to largest proportion of High-voltage circuit breaker failures, and traditional maintenance methods exist some disadvantages for that issue. Therefore, ...

    Authors: Xiaofeng Li, Shijing Wu, Xiaoyong Li, Hao Yuan and Deng Zhao
    Citation: Chinese Journal of Mechanical Engineering 2020 33:6
    Content type: Original Article Published on:

  47. The important parameters to describe waves are their amplitude and length. In order to make it easier to improve wave amplitude and facilitate wave experiment, a simple push-type wave generating method using d...

    Authors: Yi Liu, Jiafei Zheng, Ruiyin Song, Qiaoning Xu, Junhua Chen and Fangping Huang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:5
    Content type: Original Article Published on:

  48. The manual design of addendum surfaces on common CAD platforms is very tedious which requires many trials-corrections, which will certainly affect the construction efficiency and quality of addendum surfaces, ...

    Authors: Jixing Li, Tao Ning, Ping Xi, Bifu Hu, Tian Wang and Jiong Yang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:4
    Content type: Original Article Published on:

  49. Conventional manipulators with rigid structures and stiffness actuators have poor flexibility, limited obstacle avoidance capability, and constrained workspace. Some developed flexible or soft manipulators in ...

    Authors: Dunwen Wei, Tao Gao, Xiaojuan Mo, Ruru Xi and Cong Zhou
    Citation: Chinese Journal of Mechanical Engineering 2020 33:3
    Content type: Original Article Published on:

  50. The design synthesis is the key issue in the mechanical conceptual design to generate the design candidates that meet the design requirements. This paper devotes to propose a novel and computable synthesis app...

    Authors: Lin Han, Geng Liu, Xiaohui Yang and Bing Han
    Citation: Chinese Journal of Mechanical Engineering 2020 33:2
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)