Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 9 of 18

  1. The existing engineering empirical life analysis models are not capable of considering the constitutive behavior of materials under contact loads; as a consequence, these methods may not be accurate to predict...

    Authors: Aodi Yu, Hong-Zhong Huang, Yan-Feng Li, He Li and Ying Zeng
    Citation: Chinese Journal of Mechanical Engineering 2021 34:110
    Content type: Original Article Published on:

  2. Although there are methods for testing the stress-strain relation and strength, which are the most fundamental and important properties of metallic materials, their application to small-volume materials and tu...

    Authors: Guangzhao Han, Lixun Cai, Chen Bao, Bo Liang, Yang Lyu, Maobo Huang and Xiaokun Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:109
    Content type: Original Article Published on:

  3. The cast aluminum beam is a key structure for carrying the body-hung traction motor of a high-speed train; its fatigue property is fundamental for predicting the residual life and service mileage of the struct...

    Authors: Weiyuan Dou, Lele Zhang, Haifeng Chang, Haifeng Zhang and Changqing Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:108
    Content type: Original Article Published on:

  4. This paper introduces a pneumatic finger cylinder servo control system for medical grabbing. First, according to the physical structure of the proportional directional valve and the pneumatic cylinder, the sta...

    Authors: Yeming Zhang, Kaimin Li, Meng Xu, Junlei Liu and Hongwei Yue
    Citation: Chinese Journal of Mechanical Engineering 2021 34:107
    Content type: Original Article Published on:

  5. Load-sensing steering systems for articulated loaders are prone to large pressure shocks and oscillations during steering operations, affecting the system stability. An optimized structure of the redirector wi...

    Authors: Yuqi Wang, Xinhui Liu, Jinshi Chen and Dongyang Huo
    Citation: Chinese Journal of Mechanical Engineering 2021 34:106
    Content type: Original Article Published on:

  6. The maximum delivery pressure and the maximum rotational speed determine the power density of axial piston pumps. However, increasing the speed beyond the limit always accompanies cavitation, leading to the de...

    Authors: Yu Fang, Junhui Zhang, Bing Xu, Zebing Mao, Changming Li, Changsheng Huang, Fei Lyu and Zhimin Guo
    Citation: Chinese Journal of Mechanical Engineering 2021 34:105
    Content type: Original Article Published on:

  7. Deformation of the flexspline is the basis of analyzing tooth trajectory and designing tooth profile. Considering the tooth influence on the position of equivalent neutral layer, a piecewise method for calcula...

    Authors: Yunpeng Yao, Xiaoxia Chen, Jingzhong Xing, Liteng Shi and Yuqi Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:104
    Content type: Original Article Published on:

  8. The low cycle fatigue strength properties of the additively manufactured Ti-6Al-4V alloy are experimentally investigated under proportional and nonproportional multiaxial loading. The fatigue tests were conduc...

    Authors: Yuya Kimura, Fumio Ogawa and Takamoto Itoh
    Citation: Chinese Journal of Mechanical Engineering 2021 34:103
    Content type: Original Article Published on:

  9. This study proposes and experimentally validates an optimal integrated system to control the automotive continuously variable transmission (CVT) by Model Predictive Control (MPC) to achieve its expected transm...

    Authors: Ling Han, Hui Zhang, Ruoyu Fang and Hongxiang Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:102
    Content type: Original Article Published on:

  10. Most of traditional traveling wave piezoelectric transducers are driven by two phase different excitation signals, leading to a complex control system and seriously limiting their applications in industry. To ...

    Authors: Liang Wang, Fushi Bai, Viktor Hofmann, Jiamei Jin and Jens Twiefel
    Citation: Chinese Journal of Mechanical Engineering 2021 34:101
    Content type: Original Article Published on:

  13. Advanced mathematical tools are used to conduct research on the kinematics analysis of hybrid mechanisms, and the generalized analysis method and concise kinematics transfer matrix are obtained. In this study,...

    Authors: Peng Sun, Yanbiao Li, Ke Chen, Wentao Zhu, Qi Zhong and Bo Chen
    Citation: Chinese Journal of Mechanical Engineering 2021 34:98
    Content type: Original Article Published on:

  14. Buried pipelines are an essential component of the urban infrastructure of modern cities. Traditional buried pipes are mainly made of metal materials. With the development of material science and technology in...

    Authors: Liang Ge, Changpeng Zhang, Guiyun Tian, Xiaoting Xiao, Junaid Ahmed, Guohui Wei, Ze Hu, Ju Xiang and Mark Robinson
    Citation: Chinese Journal of Mechanical Engineering 2021 34:97
    Content type: Review Published on:

  15. A coupling dynamic model of a subway train and an embedded track is established to study the safety limits of track irregularities. The simulated vehicle system was a 74-degrees of freedom multi-rigid body mod...

    Authors: Yuxiang Zhang, Jian Han, Huilai Song and Yu Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:96
    Content type: Original Article Published on:

  16. A decrease in the weight of aerospace vehicles, large ships, weapons, and high-speed trains will increase the demand for wide-width magnesium alloy plates and their composite parts to replace steel and plastic...

    Authors: Chenchen Zhi, Lifeng Ma, Weitao Jia, Pengtao Liu, Qichi Le, Zhiquan Huang and Tingzhuang Han
    Citation: Chinese Journal of Mechanical Engineering 2021 34:95
    Content type: Original Article Published on:

  17. The spherical indentation test has been successfully applied to inversely derive the tensile properties of small regions in a non-destructive way. Current inverse methods mainly rely on extensive iterative cal...

    Authors: Guoyao Chen, Xiaocheng Zhang, Jiru Zhong, Jin Shi, Qiongqi Wang and Kaishu Guan
    Citation: Chinese Journal of Mechanical Engineering 2021 34:94
    Content type: Original Article Published on:

  18. In recent years, addressing ill-posed problems by leveraging prior knowledge contained in databases on learning techniques has gained much attention. In this paper, we focus on complete three-dimensional (3D) ...

    Authors: Peng Jin, Shaoli Liu, Jianhua Liu, Hao Huang, Linlin Yang, Michael Weinmann and Reinhard Klein
    Citation: Chinese Journal of Mechanical Engineering 2021 34:93
    Content type: Original Article Published on:

  19. Nickel-based alloy coatings were widely used for the remanufacturing of dies and moulds by laser cladding, but the crack sensitivity would be increase due to the higher strength and hardness, which reduced the...

    Authors: Zhenglei Yu, Lunxiang Li, Deqiang Zhang, Guangfeng Shi, Guang Yang, Zezhou Xu and Zhihui Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:92
    Content type: Original Article Published on:

  20. In hydraulic area, independent metering control (IMC) technology is an effective approach to improve system efficiency and control flexibility. In addition, digital hydraulic technology (DHT) has been verified...

    Authors: Qi Zhong, Huiming Bao, Yanbiao Li, Haocen Hong, Bin Zhang and Huayong Yang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:91
    Content type: Original Article Published on:

  21. At present, there are many studies on the residual stress field and plastic strain field introduced by surface strengthening, which can well hinder the initiation of early fatigue cracks and delay the propagat...

    Authors: Ning Wang, Jinlong Zhu, Bai Liu, Xiancheng Zhang, Jiamin Zhang and Shantung Tu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:90
    Content type: Original Article Published on:

  22. Researchers have recently attempted to monitor pool oscillations using the three-dimensional laser vision method. However, the deficiency of simulation software will result in significant capital expenditure. ...

    Authors: Xingpei Wu, Jiankang Huang, Jing He, Shien Liu, Guangyin Liu and Ding Fan
    Citation: Chinese Journal of Mechanical Engineering 2021 34:89
    Content type: Original Article Published on:

  23. This paper presents a novel neural-fuzzy-based adaptive sliding mode automatic steering control strategy to improve the driving performance of vision-based unmanned electric vehicles with time-varying and unce...

    Authors: Jinghua Guo, Keqiang Li, Jingjing Fan, Yugong Luo and Jingyao Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:88
    Content type: Original Article Published on:

  24. It is very necessary for an intelligent heavy truck to have the ability to prevent rollover independently. However, it was rarely considered in intelligent vehicle motion planning. To improve rollover stabilit...

    Authors: Zhilin Jin, Jingxuan Li, Hong Wang, Jun Li and Chaosheng Huang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:87
    Content type: Original Article Published on:

  25. Under the influence of crosswinds, the running safety of trains will decrease sharply, so it is necessary to optimize the suspension parameters of trains. This paper studies the dynamic performance of high-spe...

    Authors: Le Zhang, Tian Li, Jiye Zhang and Ronghuan Piao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:86
    Content type: Original Article Published on:

  26. Compliant micromechanisms (CMMs) acquire mobility from the deflection of elastic members and have been proven to be robust by millions of silicon MEMS devices. However, the limited deflection of silicon impede...

    Authors: Minchang Wang, Daohan Ge, Liqiang Zhang and Just L. Herder
    Citation: Chinese Journal of Mechanical Engineering 2021 34:85
    Content type: Review Published on:

  27. A compound oscillatory roller reducer (CORR) with a first-stage gear transmission and a second-stage oscillatory roller transmission is presented. The transmission principle of oscillatory roller transmission ...

    Authors: Changxu Wei, Chaosheng Song, Caichao Zhu, Chengcheng Liang and Long Hu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:84
    Content type: Original Article Published on:

  28. Most researches focus on the regenerative braking system design in vehicle components control and braking torque distribution, few combine the connected vehicle technologies into braking velocity planning. If ...

    Authors: Haoxuan Dong, Weichao Zhuang, Guodong Yin, Liwei Xu, Yan Wang, Fa’an Wang and Yanbo Lu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:83
    Content type: Original Article Published on:

  29. Gearbox condition monitoring (CM) plays a significant role in ensuring the operational reliability and efficiency of a wide range of critical industrial systems such as wind turbines and helicopters. Accurate ...

    Authors: Kaibo Lu, James Xi Gu, Hongwei Fan, Xiuquan Sun, Bing Li and Fengshou Gu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:82
    Content type: Original Article Published on:

  30. Current works of environmental perception for connected autonomous electrified vehicles (CAEVs) mainly focus on the object detection task in good weather and illumination conditions, they often perform poorly ...

    Authors: Pai Peng, Keke Geng, Guodong Yin, Yanbo Lu, Weichao Zhuang and Shuaipeng Liu
    Citation: Chinese Journal of Mechanical Engineering 2021 34:81
    Content type: Original Article Published on:

  31. The QP980-DP980 dissimilar steel joints were fabricated by fiber laser welding. The weld zone (WZ) was fully martensitic structure, and heat-affected zone (HAZ) contained newly-formed martensite and partially ...

    Authors: Junliang Xue, Peng Peng, Wei Guo, Mingsheng Xia, Caiwang Tan, Zhandong Wan, Hongqiang Zhang and Yongqiang Li
    Citation: Chinese Journal of Mechanical Engineering 2021 34:80
    Content type: Original Article Published on:

  32. Due to the bus characteristics of large quality, high center of gravity and narrow wheelbase, the research of its yaw stability control (YSC) system has become the focus in the field of vehicle system dynamics...

    Authors: Xiaoqiang Sun, Yujun Wang, Yingfeng Cai, Pak Kin Wong and Long Chen
    Citation: Chinese Journal of Mechanical Engineering 2021 34:79
    Content type: Original Article Published on:

  33. To reduce the discrepancy between the source and target domains, a new multi-label adaptation network (ML-ANet) based on multiple kernel variants with maximum mean discrepancies is proposed in this paper. The ...

    Authors: Guofa Li, Zefeng Ji, Yunlong Chang, Shen Li, Xingda Qu and Dongpu Cao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:78
    Content type: Original Article Published on:

  34. Robotic grippers have been used in industry as end-effectors but are usually limited to operations in pre-defined workspace. However, few devices can capture irregularly shaped dynamic targets in space, underw...

    Authors: Jiankun Yang, Chengwei Ren, Chenghao Yang, Youyu Wang, Shumin Wan and Rongjie Kang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:77
    Content type: Original Article Published on:

  35. Motion control of the human hand is the most complex part of the human body. It has always been a challenge for a good balance between the cost, weight, responding speed, grasping force, finger extension, and ...

    Authors: Teru Chen, Xingwei Zhao, Guocai Ma, Bo Tao and Zhouping Yin
    Citation: Chinese Journal of Mechanical Engineering 2021 34:76
    Content type: Review Published on:

  36. The current investigation of refill friction stir spot welding (refill FSSW) Al alloy to copper primarily involved plunging the tool into bottom copper sheet to achieve both metallurgical and mechanical interf...

    Authors: Zhikang Shen, Yuquan Ding, Wei Guo, Wentao Hou, Xiaochao Liu, Haiyan Chen, Fenjun Liu, Wenya Li and Adrian Gerlich
    Citation: Chinese Journal of Mechanical Engineering 2021 34:75
    Content type: Original Article Published on:

  39. Environmental perception is one of the key technologies to realize autonomous vehicles. Autonomous vehicles are often equipped with multiple sensors to form a multi-source environmental perception system. Thos...

    Authors: Huihui Pan, Weichao Sun, Qiming Sun and Huijun Gao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:72
    Content type: Original Article Published on:

  41. In the digital image correlation research of fatigue crack growth rate, the accuracy of the crack tip position determines the accuracy of the calculation of the stress intensity factor, thereby affecting the l...

    Authors: Bing Yang, Zhanjiang Wei, Zhen Liao, Shuwei Zhou, Shoune Xiao, Tao Zhu, Guangwu Yang and Mingmeng Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:70
    Content type: Original Article Published on:

  42. The remaining useful life (RUL) of a system is generally predicted by utilising the data collected from the sensors that continuously monitor different indicators. Recently, different deep learning (DL) techni...

    Authors: Youdao Wang, Yifan Zhao and Sri Addepalli
    Citation: Chinese Journal of Mechanical Engineering 2021 34:69
    Content type: Original Article Published on:

  44. The Ti6Al4V parts produced by the existing selective laser melting (SLM) are mainly confronted with poor surface finish and inevitable interior defects, which substantially deteriorates the mechanical properti...

    Authors: Sai Guo, Wei Du, Qinghong Jiang, Zhigang Dong and Bi Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:67
    Content type: Original Article Published on:

  45. The current research of narrow-gap gas metal arc welding (NG-GMAW) primarily focuses on improving the sidewall fusion and avoiding the lack-of-fusion defect. However, the high cost and operation difficulty of ...

    Authors: Guoqiang Liu, Xinhua Tang, Qi Xu, Fenggui Lu and Haichao Cui
    Citation: Chinese Journal of Mechanical Engineering 2021 34:66
    Content type: Original Article Published on:

  46. The distinguishing feature of a vertical ball screw feed system without counterweight is that the spindle system weight directly acts on the kinematic joints. Research into the dynamic characteristics under ac...

    Authors: Cunfan Zou, Huijie Zhang, Jun Zhang, Dongdong Song, Hui Liu and Wanhua Zhao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:65
    Content type: Original Article Published on:

  48. As a promising non-destructive testing (NDT) method, magnetic flux leakage (MFL) testing has been widely used for steel structure inspection. However, MFL testing still faces a great challenge to detect inner ...

    Authors: Jianbo Wu, Wenqiang Wu, Erlong Li and Yihua Kang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:63
    Content type: Original Article Published on:

  49. The remaining useful life (RUL) estimation of bearings is critical for ensuring the reliability of mechanical systems. Owing to the rapid development of deep learning methods, a multitude of data-driven RUL es...

    Authors: Xu Wang, Tianyang Wang, Anbo Ming, Qinkai Han, Fulei Chu, Wei Zhang and Aihua Li
    Citation: Chinese Journal of Mechanical Engineering 2021 34:62
    Content type: Original Article Published on:

  50. The peak identification scheme based method (three-point definition) and the spectral moments based method (spectral moment approach) are both widely used for asperity peak modeling in tribology. To discover t...

    Authors: Wei Zhou, Daiyan Zhao, Jinyuan Tang and Jun Yi
    Citation: Chinese Journal of Mechanical Engineering 2021 34:61
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)