Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 17 of 17

  1. Induction motors (IMs) are commonly used in various industrial applications. To improve energy consumption efficiency, a reliable IM health condition monitoring system is very useful to detect IM fault at its ...

    Authors: De Z. Li, Wilson Wang and Fathy Ismail
    Citation: Chinese Journal of Mechanical Engineering 2017 30:192
    Content type: Original Article Published on:

  3. Tooth pitting is a common failure mode of a gearbox. Many researchers investigated dynamic properties of a gearbox with localized pitting damage on a single gear tooth. The dynamic properties of a gearbox with...

    Authors: Xi-Hui Liang, Zhi-Liang Liu, Jun Pan and Ming Jian Zuo
    Citation: Chinese Journal of Mechanical Engineering 2017 30:196
    Content type: Original Article Published on:

  4. The demand for large antennas in future space missions has increasingly stimulated the development of deployable membrane antenna structures owing to their light weight and small stowage volume. However, there...

    Authors: Zhi-Quan Liu, Hui Qiu, Xiao Li and Shu-Li Yang
    Citation: Chinese Journal of Mechanical Engineering 2017 30:198
    Content type: Review Published on:

  5. The current morphological wavelet technologies utilize a fixed filter or a linear decomposition algorithm, which cannot cope with the sudden changes, such as impulses or edges in a signal effectively. This pap...

    Authors: Yi-Fan Li, MingJian Zuo, Ke Feng and Yue-Jian Chen
    Citation: Chinese Journal of Mechanical Engineering 2017 30:186
    Content type: Original Article Published on:

  6. With integrated equipment health prognosis, both physical models and condition monitoring data are utilized to achieve more accurate prediction of equipment remaining useful life (RUL). In this paper, an integ...

    Authors: Fu-Qiong Zhao, Ming-Jiang Xie, Zhi-Gang Tian and Yong Zeng
    Citation: Chinese Journal of Mechanical Engineering 2017 30:200
    Content type: Original Article Published on:

  7. The gripper cylinder that provides braced force for Tunnel Boring Machine (TBM) might fail due to severe vibration when the TBM excavates in the tunnel. Early fault diagnosis of the gripper cylinder is importa...

    Authors: Lin Li, Jian-Feng Tao, Hai-Dong Yu, Yi-Xiang Huang and Cheng-Liang Liu
    Citation: Chinese Journal of Mechanical Engineering 2017 30:187
    Content type: Original Article Published on:

  8. Detection of structural changes from an operational process is a major goal in machine condition monitoring. Existing methods for this purpose are mainly based on retrospective analysis, resulting in a large d...

    Authors: Teng Wang, Guo-Liang Lu, Jie Liu and Peng Yan
    Citation: Chinese Journal of Mechanical Engineering 2017 30:191
    Content type: Original article Published on:

  10. The pneumatic pressure control systems have been used in some fields. However, the researches on pneumatic pressure control mainly focus on constant pressure regulation. Poor dynamic characteristics and strong...

    Authors: Gang Yang, Jing-Min Du, Xiao-Yun Fu and Bao-Ren Li
    Citation: Chinese Journal of Mechanical Engineering 2017 30:194
    Content type: Original Article Published on:

  11. Performance index is the standard of performance evaluation, and is the foundation of both performance analysis and optimal design for the parallel manipulator. Seeking the suitable kinematic indices is always...

    Authors: Zhu-Feng Shao, Jiao Mo, Xiao-Qiang Tang and Li-Ping Wang
    Citation: Chinese Journal of Mechanical Engineering 2017 30:193
    Content type: Original Article Published on:

  12. Extracting features from original signals is a key procedure for traditional fault diagnosis of induction motors, as it directly influences the performance of fault recognition. However, high quality features ...

    Authors: Si-Yu Shao, Wen-Jun Sun, Ru-Qiang Yan, Peng Wang and Robert X Gao
    Citation: Chinese Journal of Mechanical Engineering 2017 30:189
    Content type: Original Article Published on:

  13. Smart machining has tremendous potential and is becoming one of new generation high value precision manufacturing technologies in line with the advance of Industry 4.0 concepts. This paper presents some innova...

    Authors: Kai Cheng, Zhi-Chao Niu, Robin C. Wang, Richard Rakowski and Richard Bateman
    Citation: Chinese Journal of Mechanical Engineering 2017 30:183
    Content type: Original Article Published on:

  15. Pneumatic muscles with similar characteristics to biological muscles have been widely used in robots, and thus are promising drivers for frog inspired robots. However, the application and nonlinearity of the p...

    Authors: Ji-Zhuang Fan, Wei Zhang, Peng-Cheng Kong, He-Gao Cai and Gang-Feng Liu
    Citation: Chinese Journal of Mechanical Engineering 2017 30:182
    Content type: Original Article Published on:

  17. Crack fault diagnostics plays a critical role for rotating machinery in the traditional and Industry 4.0 factory. In this paper, an experiment is set up to study the dynamic response of a rotor with a breathin...

    Authors: Chao-Zhong Guo, Ji-Hong Yan and Lawrence A. Bergman
    Citation: Chinese Journal of Mechanical Engineering 2017 30:180
    Content type: Original Article Published on:

  20. Designers and manufacturers often see consumption as the primary objective of a product – with implications such as discarded products, obsolete wastes, and ecological degradation. The paper aims to find the a...

    Authors: Mersha Aftab and Helen Agustin Rusli
    Citation: Chinese Journal of Mechanical Engineering 2017 30:161
    Content type: Original Article Published on:

  23. Thermal error monitoring technology is the key technological support to solve the thermal error problem of heavy-duty CNC (computer numerical control) machine tools. Currently, there are many review literature...

    Authors: Zu-De Zhou, Lin Gui, Yue-Gang Tan, Ming-Yao Liu, Yi Liu and Rui-Ya Li
    Citation: Chinese Journal of Mechanical Engineering 2017 30:166
    Content type: Review Published on:

  24. Cavitation erosion (CE) is the predominant cause for the failure of overflow components in fluid machinery. Advanced coatings have provided an effective solution to cavitation erosion due to the rapid developm...

    Authors: Xiang Ding, Xu-Dong Cheng, Cheng-Qing Yuan, Jin Shi and Zhang-Xiong Ding
    Citation: Chinese Journal of Mechanical Engineering 2017 30:162
    Content type: Original Article Published on:

  25. Considered as a top priority of industrial development, Industry 4.0 (or Industrie 4.0 as the German version) has being highlighted as the pursuit of both academy and practice in companies. In this paper, base...

    Authors: Egon Mueller, Xiao-Li Chen and Ralph Riedel
    Citation: Chinese Journal of Mechanical Engineering 2017 30:164
    Content type: Original Article Published on:

  27. Multi-product collaborative development is adopted widely in manufacturing enterprise, while the present multi-project planning models don’t take technical/data interactions of multiple products into account. ...

    Authors: Qing-Chao Sun, Wei-Qiang Huang, Ying-Jie Jiang and Wei Sun
    Citation: Chinese Journal of Mechanical Engineering 2017 30:160
    Content type: Original Article Published on:

  28. Attempts to minimize energy consumption of a tunnel boring machine disc cutter during the process of fragmentation have largely focused on optimizing disc-cutter spacing, as determined by the minimum specific ...

    Authors: Zhao-Huang Zhang, Guo-Fang Gong, Qing-Feng Gao and Fei Sun
    Citation: Chinese Journal of Mechanical Engineering 2017 30:159
    Content type: Original Article Published on:

  29. The impact fretting wear has largely occurred at nuclear power device induced by the flow-induced vibration, and it will take potential hazards to the service of the equipment. However, the present study focus...

    Authors: Zhen-Bing Cai, Jin-Fang Peng, Hao Qian, Li-Chen Tang and Min-Hao Zhu
    Citation: Chinese Journal of Mechanical Engineering 2017 30:147
    Content type: Original Article Published on:

  30. This paper reviews the development of valveless piezoelectric pump with cone-shaped tube chronologically, which have widely potential application in biomedicine and micro-electro-mechanical systems because of ...

    Authors: Jian-Hui Zhang, Ying Wang and Jun Huang
    Citation: Chinese Journal of Mechanical Engineering 2017 30:151
    Content type: Review Published on:

  31. Analytical compliance model is vital to the flexure- based compliant mechanism in its mechanical design and motion control. The matrix is a common and effective approach in the compliance modeling while it is ...

    Authors: Li-Ping Wang, Yao Jiang and Tie-Min Li
    Citation: Chinese Journal of Mechanical Engineering 2017 30:138
    Content type: Original Article Published on:

  33. Computational intelligence is one of the most powerful data processing tools to solve complex nonlinear problems, and thus plays a significant role in intelligent fault diagnosis and prediction. However, only ...

    Authors: Wan Zhang, Min-Ping Jia, Lin Zhu and Xiao-An Yan
    Citation: Chinese Journal of Mechanical Engineering 2017 30:150
    Content type: Review Published on:

  34. The accurate estimation of road friction coefficient in the active safety control system has become increasingly prominent. Most previous studies on road friction estimation have only used vehicle longitudinal...

    Authors: You-Qun Zhao, Hai-Qing Li, Fen Lin, Jian Wang and Xue-Wu Ji
    Citation: Chinese Journal of Mechanical Engineering 2017 30:143
    Content type: Original Article Published on:

    The Erratum to this article has been published in Chinese Journal of Mechanical Engineering 2017 30:s10033-017-0178-1

  36. Most of the current evolutionary algorithms for constrained optimization algorithm are low computational efficiency. In order to improve efficiency, an improved differential evolution with shrinking space tech...

    Authors: Chunming FU, Yadong XU, Chao JIANG, Xu HAN and Zhiliang HUANG
    Citation: Chinese Journal of Mechanical Engineering 2017 30:130
    Content type: Original Article Published on:

  37. A well-designed reflector surface with high beam pointing accuracy in electromagnetic performance is of practical significance to the space application of cable mesh reflector antennas. As for space requiremen...

    Authors: Shuxin ZHANG, Jingli DU, Wei WANG, Xinghua ZHANG and Yali ZONG
    Citation: Chinese Journal of Mechanical Engineering 2017 30:134
    Content type: Original Article Published on:

  38. Defect formation is a common problem in selective laser melting (SLM). This paper provides a review of defect formation mechanisms in SLM. It summarizes the recent research outcomes on defect findings and clas...

    Authors: Bi Zhang, Yongtao Li and Qian Bai
    Citation: Chinese Journal of Mechanical Engineering 2017 30:121
    Content type: Review article Published on:

    The Erratum to this article has been published in Chinese Journal of Mechanical Engineering 2017 30:s10033-017-0184-3

  39. Pulsed eddy current (PEC) non-destructive testing and evaluation (NDT&E) has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed t...

    Authors: Ali Sophian, Guiyun Tian and Mengbao Fan
    Citation: Chinese Journal of Mechanical Engineering 2017 30:122
    Content type: Review article Published on:

    The Erratum to this article has been published in Chinese Journal of Mechanical Engineering 2017 30:s10033-017-0177-2

  40. Large reflector antennas are widely used in radars, satellite communication, radio astronomy, and so on. The rapid developments in these fields have created demands for development of better performance and hi...

    Authors: Wei WANG, Peiyuan LIAN, Shuxin ZHANG, Binbin XIANG and Qian XU
    Citation: Chinese Journal of Mechanical Engineering 2017 30:135
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)