Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 11 of 18

  1. The design of aircraft hydraulic pipeline system is limited by many factors, such as the integrity of aviation structure or narrow installation space, so the limited clamp support position should be considered...

    Authors: Xiantao Zhang, Wei Liu, Yamei Zhang and Yujie Zhao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:10
    Content type: Original Article Published on:

  2. Imbalance vibration is a typical failure mode of rotational machines and has significant negative effects on the efficiency, accuracy, and service life of equipment. To automatically reduce the imbalance vibra...

    Authors: Xin Pan, Xiaotian He, Haiqi Wu, Chuanlong Ju, Zhinong Jiang and Jinji Gao
    Citation: Chinese Journal of Mechanical Engineering 2021 34:9
    Content type: Original Article Published on:

  3. Interfacial structure greatly affects the mechanical properties of laminated plates. However, the critical material properties that impact the interfacial morphology, appearance, and associated bonding mechani...

    Authors: Tingting Zhang, Wenxian Wang, Zhifeng Yan and Jie Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:8
    Content type: Original Article Published on:

  4. Engine tests are both costly and time consuming in developing a new internal combustion engine. Therefore, it is of great importance to predict engine characteristics with high accuracy using artificial intell...

    Authors: Halit Yaşar, Gültekin Çağıl, Orhan Torkul and Merve Şişci
    Citation: Chinese Journal of Mechanical Engineering 2021 34:7
    Content type: Original Article Published on:

  5. The current research of tire aerodynamics mainly focus on the isolated and simplified tread tire. Compared with the real complex pattern tire, the tread pattern structure and deformed profile of a loaded tire ...

    Authors: Haichao Zhou, Zhen Jiang, Guolin Wang and Shupei Zhang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:6
    Content type: Original Article Published on:

  6. Large pressure equipment needs to be tested regularly to ensure safe operation; wall-climbing robots can carry the necessary tools to inspect spherical tanks, such as cameras and non-destructive testing equipm...

    Authors: Chunlei Tu, Shanshan Jin, Kai Zheng, Xingsong Wang and Sichong Sun
    Citation: Chinese Journal of Mechanical Engineering 2021 34:5
    Content type: Original Article Published on:

  7. With the continuous expansion of the application range of microelectromechanical systems, microdevice forming technology has achieved remarkable results. However, it is challenging to develop new microforming ...

    Authors: Fuzhu Li, Haiyang Fan, Yuqin Guo, Zhipeng Chen, Xu Wang, Ruitao Li, Hong Liu and Yun Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:4
    Content type: Original Article Published on:

  8. The existing research on SiCp/Al composite machining mainly focuses on the machining parameters or surface morphology. However, the surface quality of SiCp/Al composites with a high volume fraction has not been e...

    Authors: Xu Zhao, Yadong Gong, Guiqiang Liang, Ming Cai and Bing Han
    Citation: Chinese Journal of Mechanical Engineering 2021 34:3
    Content type: Original Article Published on:

  10. Current research on quadrotor modeling mainly focuses on theoretical analysis methods and experimental methods, which have problems such as weak adaptability to the environment, high test costs, and long durat...

    Authors: Sen Yang, Leiping Xi, Jiaxing Hao and Wenjie Wang
    Citation: Chinese Journal of Mechanical Engineering 2021 34:1
    Content type: Original Article Published on:

  11. Gas bearings, which have the advantages of low frictional resistance and power loss, high rotational speed and high temperature operation, and long life, are more suitable than are traditional liquid lubricate...

    Authors: Huaqi Lian, Hong Wu, Yulong Li and Chengjun Rong
    Citation: Chinese Journal of Mechanical Engineering 2020 33:98
    Content type: Original Article Published on:

  12. High repeatability of needle insertion experiments is essential to the needle-phantom interaction model validation. However, the influential factors governing the accuracy of the phantom and needle deformation...

    Authors: Murong Li, Yong Lei and Tian Xu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:97
    Content type: Original Article Published on:

  13. As for the complex operational tasks in the unstructured environment with narrow workspace and numerous obstacles, the traditional robots cannot accomplish these mentioned complex operational tasks and meet th...

    Authors: Yongjie Zhao, Xiaogang Song, Xingwei Zhang and Xinjian Lu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:96
    Content type: Original Article Published on:

  14. Wideband acoustic imaging, which combines compressed sensing (CS) and microphone arrays, is widely used for locating acoustic sources. However, the location results of this method are unstable, and the computa...

    Authors: Fangli Ning, Zhe Liu, Jiahao Song, Feng Pan, Pengcheng Han and Juan Wei
    Citation: Chinese Journal of Mechanical Engineering 2020 33:95
    Content type: Original Article Published on:

  15. A design problem with deficient information is generally described as wicked or ill-defined. The information insufficiency leaves designers with loose settings, free environments, and a lack of strict boundari...

    Authors: Qian Hui, Yan Li, Ye Tao and Hongwei Liu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:94
    Content type: Original Article Published on:

  16. The current research mainly focuses on the flow control for the two-stage proportional valve with hydraulic position feedback which is named as Valvistor valve. Essentially, the Valvistor valve is a proportion...

    Authors: He Wang, Xiaohu Wang, Jiahai Huang and Long Quan
    Citation: Chinese Journal of Mechanical Engineering 2020 33:93
    Content type: Original Article Published on:

  17. As the first link element for the transmission of shaft vibration to the pedestal and even to the hull, water-lubricated bearing plays a key role in suppressing vibration. Although the porous structure is cons...

    Authors: Yong Jin, Jianjun Lu, Wu Ouyang, Zhenglin Liu and Kunsheng Lao
    Citation: Chinese Journal of Mechanical Engineering 2020 33:92
    Content type: Original Article Published on:

  18. Nanoparticle-reinforced metal matrix composite coatings have significant potential in mechanical part surface strengthening owing their excellent mechanical properties. This paper reports a phenomenon in which...

    Authors: Renjie Ji, Hui Jin, Yonghong Liu, Tiancong Dong, Fan Zhang, Lilong Zhao, Xinlei Wu, Qiang Sun, Peng Liu, Hang Dong, Chi Ma, Dege Li and Baoping Cai
    Citation: Chinese Journal of Mechanical Engineering 2020 33:91
    Content type: Original Article Published on:

  19. Friction stir welding is a promising solid-state welding technique. However, the issue of tool wear and break restricts its wider industrial application. To avoid the tool wear and break occurring in conventio...

    Authors: Xiaochao Liu, Yunqian Zhen, Zhikang Shen, Haiyan Chen, Wenya Li, Wei Guo and Zhufeng Yue
    Citation: Chinese Journal of Mechanical Engineering 2020 33:90
    Content type: Original Article Published on:

  20. The high-end equipment represented by high-end machine tools and aero-engines is the core component of the national intelligent manufacturing plan, and the mass unbalance is the main reason for its excessive v...

    Authors: Xin Pan, Jiaqiao Lu, Jiaji Huo, Jinji Gao and Haiqi Wu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:89
    Content type: Review Published on:

  21. The current research of titanium alloy on friction welding process in the field of aero-engines mainly focuses on the linear friction welding. Compared to the linear friction welding, inertial friction welding...

    Authors: Yanquan Wu, Chunbo Zhang, Jun Zhou, Wu Liang and Yunlei Li
    Citation: Chinese Journal of Mechanical Engineering 2020 33:88
    Content type: Original Article Published on:

  22. Topology Optimization (TO) is a powerful numerical technique to determine the optimal material layout in a design domain, which has accepted considerable developments in recent years. The classic Finite Elemen...

    Authors: Jie Gao, Mi Xiao, Yan Zhang and Liang Gao
    Citation: Chinese Journal of Mechanical Engineering 2020 33:87
    Content type: Review Published on:

  23. Converting customer needs into specific forms and providing consumers with services are crucial in product design. Currently, conversion is no longer difficult due to the development of modern technology, and ...

    Authors: Tao Yang, Xueshan Gao and Fuquan Dai
    Citation: Chinese Journal of Mechanical Engineering 2020 33:86
    Content type: Original Article Published on:

  24. Combined with the tire dynamics theoretical model, a rapid test method to obtain tire lateral and longitudinal both steady-state and transient characteristics only based on the tire quasi-steady-state test res...

    Authors: Dang Lu, Lei Lu, Haidong Wu, Wei Wang and Manyi Lv
    Citation: Chinese Journal of Mechanical Engineering 2020 33:85
    Content type: Original Article Published on:

  25. In the nondestructive testing and evaluation area, magnetic major hysteresis loop measurement technology are widely applied for ferromagnetic material evaluation. However the characterization ability of major ...

    Authors: Cunfu He, Wenqiao Dou, Xiucheng Liu, Meng Yang and Ruifang Zhang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:84
    Content type: Original Article Published on:

  26. The spindle barrel finishing is commonly used to improve the surface integrity of the important parts of the high-end equipment while it is difficult to provide enough test artifacts for the traditional trial ...

    Authors: Na Wang, Shengqiang Yang, Tingting Zhao, Bo Cao and Chengwei Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:83
    Content type: Original Article Published on:

  28. The current research of reconfigurable parallel mechanism mainly focuses on the construction of reconfigurable joints. Compared with the method of changing the mobility by physical locking joints, the geometri...

    Authors: Duanling Li, Pu Jia, Jiazhou Li, Dan Zhang and Xianwen Kong
    Citation: Chinese Journal of Mechanical Engineering 2020 33:81
    Content type: Original Article Published on:

  29. Current research concerning legged platforms and wheeled platforms primarily focuses on terrain adaptive capability and speed capability, respectively. Compared with wheeled platforms, legged platforms with a ...

    Authors: Chaoran Wei, Yanan Yao, Jianxu Wu and Ran Liu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:80
    Content type: Original Article Published on:

  31. The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms, or using screw theory to perform multi...

    Authors: Yongquan Li, Yang Zhang and Lijie Zhang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:78
    Content type: Original Article Published on:

  32. As a type of multiconfiguration mechanism that can operate in an under-actuated state, metamorphic mechanisms were proposed more than two decades ago and attracted significant interest. Studies on structural s...

    Authors: Qiang Yang, Guangbo Hao, Shujun Li, Hongguang Wang and Haiyang Li
    Citation: Chinese Journal of Mechanical Engineering 2020 33:77
    Content type: Original Article Published on:

  33. Aluminum alloys have drawn considerable attention in the area of automotive lightweight. High strength aluminum alloys are usually deformed at elevated temperatures due to their poor formability at room temper...

    Authors: Jianping Lin, Xingyu Bao, Yong Hou, Junying Min, Xinlei Qu, Zhimin Tao and Jiajie Chen
    Citation: Chinese Journal of Mechanical Engineering 2020 33:76
    Content type: Original Article Published on:

  34. Devices with variable stiffness are drawing more and more attention with the growing interests of human-robot interaction, wearable robotics, rehabilitation robotics, etc. In this paper, the authors report on ...

    Authors: Zhuang Zhang, Genliang Chen, Weicheng Fan, Wei Yan, Lingyu Kong and Hao Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:75
    Content type: Original Article Published on:

  35. With the development of intelligent flexible manufacturing, traditional industrial manipulators with a single configuration are difficult to meet a variety of tasks. Reconfigurable robots have developed rapidl...

    Authors: Wenfu Xu, Liang Han, Xin Wang, Han Yuan and Bin Liang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:74
    Content type: Original Article Published on:

  36. Diamond tools with orderly arrangements of diamond grits have drawn considerable attention in the machining field owing to their outstanding advantages of high sharpness and long service life. This diamond sup...

    Authors: Bin Chen, Peng Chen, Yongjun Huang, Xiangxi Xu, Yibo Liu and Shuangxi Wang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:73
    Content type: Original Article Published on:

  38. A super redundant serpentine manipulator has slender structure and multiple degrees of freedom. It can travel through narrow spaces and move in complex spaces. This manipulator is composed of many modules that...

    Authors: Li Chen, Ying Ma, Yu Zhang and Jinguo Liu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:71
    Content type: Original Article Published on:

  39. As the structures of multiarm robots are serially arranged, the packaging and transportation of these robots are often inconvenient. The ability of these robots to operate objects must also be improved. Addres...

    Authors: Fu-Qun Zhao, Sheng Guo, Hai-Jun Su, Hai-Bo Qu and Ya-Qiong Chen
    Citation: Chinese Journal of Mechanical Engineering 2020 33:70
    Content type: Original Article Published on:

  40. In the case of valuable cold-rolled Cu/Al clad plates, billet surface treatment before rolling is a significant process that can affect the bonding efficiency and quality. While the current studies primarily f...

    Authors: Jianchao Han, Hui Niu, Sha Li, Zhongkai Ren, Yi Jia, Tao Wang, A. I. Plokhikh and Qingxue Huang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:69
    Content type: Original Article Published on:

  41. Space-deployable mechanisms can be used as supporting structures for large-diameter antennas in space engineering. This study proposes a novel method for constructing the surface design of space reflector ante...

    Authors: Pengyuan Zhao, Jinguo Liu, Chenchen Wu, Yangmin Li and Keli Chen
    Citation: Chinese Journal of Mechanical Engineering 2020 33:68
    Content type: Original Article Published on:

  42. The spherical valve plate/cylinder block pair has the advantages of strong overturning resistance and large bearing area. However, the configurations of the unloading and pre-boosting triangular grooves on the...

    Authors: Bin Zhao, Weiwei Guo and Long Quan
    Citation: Chinese Journal of Mechanical Engineering 2020 33:67
    Content type: Original Article Published on:

  43. Deep-sea sediment is extremely important in marine scientific research, such as that concerning marine geology and microbial communities. The research findings are closely related to the in-situ information of...

    Authors: Shudong He, Youduo Peng, Yongping Jin, Buyan Wan and Guangping Liu
    Citation: Chinese Journal of Mechanical Engineering 2020 33:66
    Content type: Review Published on:

  44. Zr-based Bulk metallic glasses exhibit incredible corrosion resistance and glass forming ability, however, these properties need further enhancement to meet the practical use. In this study, Zr63Fe2.5Cu23Al11.5, ...

    Authors: Yu Luo, Yidong Jiang, Pei Zhang, Xin Wang, Haibo Ke and Pengcheng Zhang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:65
    Content type: Original Article Published on:

  46. It has been challenging to design seedling pick-up mechanism based on given key points and trajectories, because it involves dimensional synthesis and rod length optimization. In this paper, the dimensional sy...

    Authors: Zhipeng Tong, Gaohong Yu, Xiong Zhao, Pengfei Liu and Bingliang Ye
    Citation: Chinese Journal of Mechanical Engineering 2020 33:63
    Content type: Original Article Published on:

  47. Topology and performance are the two main topics dealt in the development of robotic mechanisms. However, it is still a challenge to connect them by integrating the modeling and design process of both parts in...

    Authors: Xinming Huo, Shuofei Yang, Binbin Lian, Tao Sun and Yimin Song
    Citation: Chinese Journal of Mechanical Engineering 2020 33:62
    Content type: Review Published on:

  48. Current research on lane-keeping systems ignores the effect of the driver and external resistance on the accuracy of tracking the lane centerline. To reduce the lateral deviation of the vehicle, a lane-keeping...

    Authors: Wuwei Chen, Linfeng Zhao, Huiran Wang and Yangcheng Huang
    Citation: Chinese Journal of Mechanical Engineering 2020 33:61
    Content type: Original Article Published on:

  49. Achieving accurate speed prediction provides the most critical support parameter for high-level energy management of plug-in hybrid electric vehicles. Nowadays, people often drive a vehicle on fixed routes in ...

    Authors: Lipeng Zhang, Wei Liu and Bingnan Qi
    Citation: Chinese Journal of Mechanical Engineering 2020 33:60
    Content type: Original Article Published on:

  50. In gear transmission, temperature rise has a non-negligible impact on the accuracy, noise and transmission efficiency. However, there is no relevant research on the temperature rise of the anti-backlash single...

    Authors: Shisong Wang, Shike Wang, Jie Wang and Xingqiao Deng
    Citation: Chinese Journal of Mechanical Engineering 2020 33:59
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)