Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 11 of 14

  1. Posture adjustment of open-type hard rock tunnel boring machine (TBM) can be achieved by properly adjusting the hydraulic pressure of gripper cylinder and torque cylinders. However, the time-varying inhomogene...

    Authors: Chengjun Shao, Jianfeng Liao, Zhitao Liu and Hongye Su
    Citation: Chinese Journal of Mechanical Engineering 2019 32:34
    Content type: Original Article Published on:

  2. With the improvement of vehicles electrical equipment, the existing silicon rectification generator and permanent magnet generator cannot meet the requirement of the electric power consumption of the modern ve...

    Authors: Xueyi Zhang, Qinjun Du, Jinbin Xu, Yuzhen Zhao and Shilun Ma
    Citation: Chinese Journal of Mechanical Engineering 2019 32:33
    Content type: Original Article Published on:

  3. Laying head is a high-precision engineering device in hot-rolled high speed wire rod production line. Previously research works are focused on the laying pipe wear-resisting. Laying pipe curve design method ba...

    Authors: Shuangji Yao, Marco Ceccarelli, Giuseppe Carbone and Bin Ma
    Citation: Chinese Journal of Mechanical Engineering 2019 32:32
    Content type: Original Article Published on:

  6. The current research of low cycle fatigue (LCF) is mainly focused on the components with uniform microstructure. Compared with these typical components, LCF behavior of welded components are more complex due t...

    Authors: Ke Xu, Xiongfei Wang, Haichao Cui and Fenggui Lu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:29
    Content type: Original Article Published on:

  7. In order to solve the springback problem in sheet metal forming, the trial and error method is a widely used method in the factory, which is time-consuming and costly for its non-direction and non-quantitative...

    Authors: Rui Ma, Chunge Wang, Ruixue Zhai and Jun Zhao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:28
    Content type: Original Article Published on:

  8. The current research of corrosion resistance of stainless steels mainly focuses on characterization of the passive films by point defect mode and mixed-conduction model. The corrosion resistance of the passive...

    Authors: Yubo Zhang, Hongyun Luo, Qunpeng Zhong, Honghui Yu and Jinlong Lv
    Citation: Chinese Journal of Mechanical Engineering 2019 32:27
    Content type: Original Article Published on:

  9. Existing eddy current non-destructive testing (NDT) techniques generally do not consider the inclination angle of inclined cracks, which potentially harms a larger region of a tested structure. This work propo...

    Authors: Faris Nafiah, Ali Sophian, Md Raisuddin Khan, Syamsul Bahrin Abdul Hamid and Ilham Mukriz Zainal Abidin
    Citation: Chinese Journal of Mechanical Engineering 2019 32:26
    Content type: Original Article Published on:

  11. Although there are some multi-sensor methods for measuring the straightness and tilt errors of a linear slideway, they need to be further improved in some aspects, such as suppressing measurement noise and red...

    Authors: Lei Zhao, Kai Cheng, Hui Ding and Liang Zhao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:24
    Content type: Original Article Published on:

  12. Only the lubrication performance at rated engine operating condition was generally analyzed in current design and research of engine connecting-rod and main bearing. However, the actual engine (especially vehi...

    Authors: Jun Sun, Biao Li, Shaoyu Zhu, Enming Miao, Hu Wang, Xiaoyong Zhao and Qin Teng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:23
    Content type: Original Article Published on:

  15. A parameterized dynamics analysis model of legged lander with adaptive landing gear was established. Based on the analysis model, the landing performances under various landing conditions were analyzed by the ...

    Authors: Zongmao Ding, Hongyu Wu, Chunjie Wang and Jianzhong Ding
    Citation: Chinese Journal of Mechanical Engineering 2019 32:20
    Content type: Original Article Published on:

  16. A novel method was proposed to design the structure of a bone tissue engineering scaffold based on triply periodic minimal surface. In this method, reverse engineering software was used to reconstruct the surf...

    Authors: Zhen Wang, Chuanzhen Huang, Jun Wang, Peng Wang, Shisheng Bi and Ch Asad Abbas
    Citation: Chinese Journal of Mechanical Engineering 2019 32:19
    Content type: Original Article Published on:

  17. The current research of quadruped robot focuses on the quadruped robot with spine motion. Contact time is a very important part of system performance. However, the mechanism of spine motion about contact time ...

    Authors: Qi Liu, Yannian Bao, Wei Yu, Jianming Zhang, Chao Li and Xinru Xie
    Citation: Chinese Journal of Mechanical Engineering 2019 32:18
    Content type: Original Article Published on:

  18. Cavitation has a significant effect on the flow fields and structural behaviors of a centrifugal pump. In this study, the unsteady flow and structural behaviors of a centrifugal pump are investigated numerical...

    Authors: Denghao Wu, Yun Ren, Jiegang Mou, Yunqing Gu and Lanfang Jiang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:17
    Content type: Original Article Published on:

  19. The current research of autonomous vehicle motion control mainly focuses on trajectory tracking and velocity tracking. However, numerous studies deal with trajectory tracking and velocity tracking separately, ...

    Authors: Fen Lin, Yaowen Zhang, Youqun Zhao, Guodong Yin, Huiqi Zhang and Kaizheng Wang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:16
    Content type: Original Article Published on:

  20. The remaining useful life (RUL) prediction of mechanical products has been widely studied for online system performance reliability, device remanufacturing, and product safety (safety awareness and safety impr...

    Authors: Yawei Hu, Shujie Liu, Huitian Lu and Hongchao Zhang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:15
    Content type: Review Published on:

  21. According to relevant airworthiness standards, the aircraft fuel tank access cover must withstand the impact by tire fragments, and minimize the penetration and deformation, which is critical for flight safety...

    Authors: Shile Yao, Zhufeng Yue, Xiaoliang Geng and Peiyan Wang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:14
    Content type: Original Article Published on:

  22. A flexure hinge is a major component in designing compliant mechanisms that offers unique possibilities in a wide range of application fields in which high positioning accuracy is required. Although various fl...

    Authors: Benliang Zhu, Xianmin Zhang, Min Liu, Qi Chen and Hai Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:13
    Content type: Original Article Published on:

  23. Differential braking and active steering have already been integrated to overcome their shortcomings. However, existing research mainly focuses on two-axle vehicles and controllers are mostly designed to use o...

    Authors: Buyang Zhang, Changfu Zong, Guoying Chen, Yanjun Huang and Ting Xu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:12
    Content type: Original Article Published on:

  24. When an output curve force is applied to a horizontal servo cylinder with a heavy load, the piston rod bears a dynamic partial load based on the installation and load characteristics, which significantly affec...

    Authors: Linan Ma, Qingxue Huang, Lifeng Ma, Qiangjun Ma, Wenze Zhang and Heyong Han
    Citation: Chinese Journal of Mechanical Engineering 2019 32:11
    Content type: Original Article Published on:

  25. A precise detection of the fault feature parameter of motor current is a new research hotspot in the broken rotor bar (BRB) fault diagnosis of induction motors. Discrete Fourier transform (DFT) is the most pop...

    Authors: Panpan Wang, Liping Shi, Yong Zhang, Yifan Wang and Li Han
    Citation: Chinese Journal of Mechanical Engineering 2019 32:10
    Content type: Original Article Published on:

  26. Considerable studies have been carried out on fault diagnosis of gears, with most of them concentrated on conventional vibration analysis. However, besides the complexity of gear dynamics, the diagnosis result...

    Authors: Lin Liang, Fei Liu, Xiangwei Kong, Maolin Li and Guanghua Xu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:9
    Content type: Original Article Published on:

  28. It is a challenging issue to detect bearing fault under nonstationary conditions and gear noise interferences. Meanwhile, the application of the traditional methods is limited by their deficiencies in the aspe...

    Authors: Dezun Zhao, Jianyong Li, Weidong Cheng and Zhiyang He
    Citation: Chinese Journal of Mechanical Engineering 2019 32:7
    Content type: Original Article Published on:

  29. Compact hot extrusion (CHE) process of heavy caliber thick-wall pipe is a new material-saving production process. In order to reveal the optimum hot extrusion parameters in CHE process, the effects of the extr...

    Authors: Lu Jia, Yongtang Li, Tianjing Hui and Yang Zhang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:6
    Content type: Original Article Published on:

  30. The current investigations primarily focus on using advanced suspensions to overcome the tradeoff design of ride comfort and handling performance for mining vehicles. It is generally realized by adjusting spri...

    Authors: Jie Zhang, Yuanwang Deng, Nong Zhang, Bangji Zhang, Hengmin Qi and Minyi Zheng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:5
    Content type: Original Article Published on:

  31. The annular volute is typically used in a slurry pump to reduce the collisions between solid particles and the volute tongue and to achieve a better resistance to blocking. However, only limited studies regard...

    Authors: Yi Tao, Shouqi Yuan, Jianrui Liu and Fan Zhang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:4
    Content type: Original Article Published on:

  33. Micro milling is a flexible and economical method to fabricate micro components with three-dimensional geometry features over a wide range of engineering materials. But the surface roughness and micro topograp...

    Authors: Wanqun Chen, Yazhou Sun, Dehong Huo and Xiangyu Teng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:2
    Content type: Original Article Published on:

  34. Grinding chatter is a self-induced vibration which is unfavorable to precision machining processes. This paper proposes a forecasting method for grinding state identification based on bivarition empirical mode...

    Authors: Huan-Guo Chen, Jian-Yang Shen, Wen-Hua Chen, Chun-Shao Huang, Yong-Yu Yi and Jia-Cheng Qian
    Citation: Chinese Journal of Mechanical Engineering 2019 32:1
    Content type: Original Article Published on:

  35. The mechanical and wear properties of CFRP laminate were investigated using a method of cycling low velocity impact, to study the trend and mechanism of impact resistance of the CFRP laminate under repeated im...

    Authors: Yang Sun, Zhen-Bing Cai, Song-Bo Wu, Jian-Hua Liu and Jia-Xin Yu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:112
    Content type: Original Article Published on:

  37. The trajectory tracking control problem is addressed for autonomous underwater vehicle (AUV) in marine environment, with presence of the influence of the uncertain factors including ocean current disturbance, ...

    Authors: Chao Yang, Feng Yao and Ming-Jun Zhang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:110
    Content type: Original Article Published on:

  38. The contact stiffness of a mechanical bonding surface is an important parameter in determining the normal and radial contact force. To improve the calculation accuracy of the contact force model, the surface r...

    Authors: Shi-Hua Li, Xue-Yan Han, Jun-Qi Wang, Jing Sun and Fu-Juan Li
    Citation: Chinese Journal of Mechanical Engineering 2018 31:109
    Content type: Original Article Published on:

  39. The selective laser melting (SLM) method has a great potential for fabricating injection mold with complex structure. However, the microstructure and performance of the SLM molds show significantly different f...

    Authors: Shi-Feng Wen, Xian-Tai Ji, Yan Zhou, Chang-Jun Han, Qing-Song Wei and Yu-Sheng Shi
    Citation: Chinese Journal of Mechanical Engineering 2018 31:108
    Content type: Original Article Published on:

  40. The information transmission path optimization (ITPO) can often affect the efficiency and accuracy of remanufacturing service. However, there is a greater degree of uncertainty and complexity in information tr...

    Authors: Lei Wang, Xu-Hui Xia, Jian-Hua Cao, Xiang Liu and Jun-Wei Liu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:107
    Content type: Original Article Published on:

  41. There are many achievements in the field of analytical mechanics, such as Lagrange Equation, Hamilton’s Principle, Kane’s Equation. Compared to Newton–Euler mechanics, analytical mechanics have a wider range o...

    Authors: Xiao-Min Zhao, Ye-Hwa Chen, Han Zhao and Fang-Fang Dong
    Citation: Chinese Journal of Mechanical Engineering 2018 31:106
    Content type: Review Published on:

  42. To improve the design speed and reduce the design cost for the previous blade design method, a modified inverse design method is presented. In the new method, after a series of physical and mathematical simpli...

    Authors: Ye-Ming Lu, Xiao-Fang Wang, Wei Wang and Fang-Ming Zhou
    Citation: Chinese Journal of Mechanical Engineering 2018 31:105
    Content type: Original Article Published on:

  43. Time-variant excitations in planetary gear trains can cause excessive noise and vibration and even damage the system on a permanent basis. This paper focuses on the elastic vibrations of a helical planetary ri...

    Authors: Shi-Yu Wang and Chanannipat Meesap
    Citation: Chinese Journal of Mechanical Engineering 2018 31:104
    Content type: Original Article Published on:

  45. The beer game model is a typical paradigm used to study complex dynamics behaviours in production–distribution systems. The model, however, does not accord with current practical supply chain system models in ...

    Authors: Wen Wang and Wei-Ping Fu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:102
    Content type: Original Article Published on:

  46. Filament winding has emerged as the main process for carbon fiber reinforced plastic (CFRP) fabrication, and tension control plays a key role in enhancing the quality of the winding products. With the continuo...

    Authors: Xiao-Ming Xu, Wu-Xiang Zhang, Xi-Lun Ding, Ming Zhang and Shi-Hou Wei
    Citation: Chinese Journal of Mechanical Engineering 2018 31:101
    Content type: Original Article Published on:

  47. Overtaking accidents caused by improper operations performed by a driver occur frequently. However, most studies on overtaking safety have neglected research into driver control input. A novel method is propos...

    Authors: You-Qun Zhao, Xing-Long Zhang, Wen-Xin Zhang and Fen Lin
    Citation: Chinese Journal of Mechanical Engineering 2018 31:100
    Content type: Original Article Published on:

  48. During the oscillating twin-roll strip casting process, the quality of final products is directly influenced by the flow field distribution of molten metal in the pool. The variation in the flow field is cause...

    Authors: Zhi-Qiang Xu, Zhe-Ru Meng, Shun-Hui Xue, De-Quan Zhang and Feng-Shan Du
    Citation: Chinese Journal of Mechanical Engineering 2018 31:99
    Content type: Original Article Published on:

  49. Adhesion of cutting tool and chip often occurs when machining stainless steels with cemented carbide tools. Wear mechanism of cemented carbide tool in high speed milling of stainless steel 0Cr13Ni4Mo was studi...

    Authors: Guang-Jun Liu, Zhao-Cheng Zhou, Xin Qian, Wei-Hai Pang, Guang-Hui Li and Guang-Yu Tan
    Citation: Chinese Journal of Mechanical Engineering 2018 31:98
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • Citation Impact
    2.964 - 2-year Impact Factor (2021)
    2.784 - 5-year Impact Factor (2021)
    1.407 - Source Normalized Impact per Paper (SNIP)
    0.648 - SCImago Journal Rank (SJR)
    4.4 - CiteScore

    Speed
    78 days to first decision for all manuscripts (Median)
    129 days to first decision for reviewed manuscripts only (Median)

    Usage 
    540,648 downloads (2021)
    49 Altmetric mentions (2021)

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)