Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 16 of 18

  1. This paper proposes a new method for measurement of the roll error motion of a slide table in a precision linear slide. The proposed method utilizes a pair of clinometers in the production process of a precisi...

    Authors: Yuki Shimizu, Satoshi Kataoka and Wei Gao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:92
    Content type: Original Article Published on:

  3. The problem of chatter vibration is associated with adverse consequences that often lead to tool impairment and poor surface finished in a workpiece, and thus, controlling or suppressing chatter vibrations is ...

    Authors: Bashir Bala Muhammad, Min Wan, Yang Liu and Heng Yuan
    Citation: Chinese Journal of Mechanical Engineering 2018 31:90
    Content type: Original Article Published on:

  4. In order to solve the problem of substantial computational resources of lattice structure during optimization, a local relative density mapping (LRDM) method is proposed. The proposed method uses solid isotrop...

    Authors: Guo-Hua Song, Shi-Kai Jing, Fang-Lei Zhao, Ye-Dong Wang, Hao Xing and Long-Fei Qie
    Citation: Chinese Journal of Mechanical Engineering 2018 31:89
    Content type: Original Article Published on:

  5. Due to operational wear and uneven carbon absorption in compressor and turbine wheels, the unbalance (me) vibration is induced and could lead to sub-synchronous vibration accidents for high-speed turbocharger (TC...

    Authors: Guang-Fu Bin, Yuan Huang, Shuai-Ping Guo, Xue-Jun Li and Gang Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:88
    Content type: Original Article Published on:

  6. The spherical plain bearing test bench is a necessary detecting equipment in the research process of self-lubricating spherical plain bearings. The varying environmental temperatures cause the thermal deformat...

    Authors: Zhan-Qi Hu, Wei Li, Yu-Lin Yang, Bing-Li Fan and Hai-Li Zhou
    Citation: Chinese Journal of Mechanical Engineering 2018 31:87
    Content type: Original Article Published on:

  7. The process of the gas jet from aircraft engines impacting a jet blast deflector is not only a complex fluid–solid coupling problem that is not easy to compute, but also a safety issue that seriously interfere...

    Authors: Fu-Dong Gao, De-Xin Wang, Hai-Dong Wang and Ming-Ming Jia
    Citation: Chinese Journal of Mechanical Engineering 2018 31:86
    Content type: Original Article Published on:

  8. The dynamic recrystallization (DRX) simulation performance largely depends on simulated grain topological structures. However, currently solutions used different models for describing two-dimensional (2D) and ...

    Authors: Yi-Na Guo, Yong-Tang Li, Wen-Yan Tian, Hui-Ping Qi and Hong-Hong Yan
    Citation: Chinese Journal of Mechanical Engineering 2018 31:85
    Content type: Original Article Published on:

  9. Many DNA-based devices need to build stable and controllable DNA films on surfaces. However, the most commonly used method of film characterization, namely, the probe-like microscopes which may destroy the sam...

    Authors: Gui-Bin Shen, Ya-Jing Kan, Min-Hua Chen and Yun-Fei Chen
    Citation: Chinese Journal of Mechanical Engineering 2018 31:84
    Content type: Original Article Published on:

  10. Researchers face difficulties in studying the effects of driveline efficiency on car fuel economy via bench and road tests because of long working periods, high costs, and heavy workloads. To simplify the stud...

    Authors: Yu-Long Lei, Yu-Zhe Jia, Yao Fu, Ke Liu, Ying Zhang and Zhen-Jie Liu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:83
    Content type: Original Article Published on:

  11. Constant stress accelerated life tests (ALTs) can be applied to obtain a high estimation accuracy of reliability measurements, but these are time-consuming tests. Progressive stress ALTs can yield failures mor...

    Authors: Wen-Hua Chen, Fan Yang, Ping Qian, Jun Pan and Qing-Chuan He
    Citation: Chinese Journal of Mechanical Engineering 2018 31:82
    Content type: Original Article Published on:

  13. In spectrum analysis of induction motor current, the characteristic components of broken rotor bars (BRB) fault are often submerged by the fundamental component. Although many detection methods have been propo...

    Authors: Pan-Pan Wang, Xiao-Xiao Chen, Yong Zhang, Yong-Jun Hu and Chang-Xin Miao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:80
    Content type: Original Article Published on:

  14. Rare earth (RE) elements have positive effects on Al alloy, while most research is focused on microstructure and mechanical properties. As important application indices, toughness and plasticity are properties...

    Authors: Ting-Biao Guo, Feng Zhang, Wan-Wu Ding and Zhi Jia
    Citation: Chinese Journal of Mechanical Engineering 2018 31:79
    Content type: Original Article Published on:

  15. Retinal surgery continues to be one of the most technical demanding surgeries for its high manipulation accuracy requirement, small and constrained workspace, and delicate retinal tissue. Robotic systems have ...

    Authors: Chang-Yan He, Long Huang, Yang Yang, Qing-Feng Liang and Yong-Kang Li
    Citation: Chinese Journal of Mechanical Engineering 2018 31:78
    Content type: Original Article Published on:

  16. Rubik’s Cube is a widely popular mechanical puzzle that has attracted attention around the world because of its unique characteristics. As a classic brain-training toy well known to the public, Rubik’s Cube wa...

    Authors: Da-Xing Zeng, Ming Li, Juan-Juan Wang, Yu-Lei Hou, Wen-Juan Lu and Zhen Huang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:77
    Content type: Review Published on:

  17. Point features, as the basis of lines, surfaces, and bodies, are commonly used in medical image registration. To obtain an elegant spatial transformation of extracted feature points, many point set matching al...

    Authors: Shao-Ya Guan, Tian-Miao Wang, Cai Meng and Jun-Chen Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:76
    Content type: Review Published on:

  18. Many design engineers in cross-domain industries have attended training classes of TRIZ to improve their innovative abilities in China. Most of them are successful, but others are not. So the latest target of ...

    Authors: Run-Hua Tan, Ya-Fan Dong, Bo-Jun Yang and Peng Zhang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:75
    Content type: Original Article Published on:

  19. Wire and arc additive manufacturing (WAAM) shows a great promise for fabricating fully dense metal parts by means of melting materials in layers using a welding heat source. However, due to a large layer heigh...

    Authors: Jun Xiong, Yan-Jiang Li, Zi-Qiu Yin and Hui Chen
    Citation: Chinese Journal of Mechanical Engineering 2018 31:74
    Content type: Original Article Published on:

  20. It is a great challenge to find effective atomizing technology for reducing industrial pollution; the twin-fluid atomizing nozzle has drawn great attention in this field recently. Current studies on twin-fluid...

    Authors: Bo Chen, Dian-Rong Gao, Shao-Feng Wu and Jian-Hua Zhao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:73
    Content type: Original Article Published on:

  21. Surfaces with controllable micro structures are significant in fundamental development of superhydrophobicity. However, preparation of superhydrophobic surfaces with array structures on metal substrates is not...

    Authors: Jing Sun, Wei Cheng, Jin-Long Song, Yao Lu, Yan-Kui Sun, Liu Huang, Xin Liu, Zhu-Ji Jin, Claire J. Carmalt and Ivan P. Parkin
    Citation: Chinese Journal of Mechanical Engineering 2018 31:72
    Content type: Original Article Published on:

  22. The surface quality of chamfer milling of stainless steel is closed related to the products of 3C (Computer, Communication and Consumer electronics), where a cutter is a major part to achieve that. Targeting a...

    Authors: Xian-Li Liu, Jin-Kui Shi, Wei Ji and Li-Hui Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:71
    Content type: Original Article Published on:

  23. Thermal self-compressing bonding (TSCB) is a new solid-state bonding method pioneered by the authors. With electron beam as the non-melted heat source, previous experimental study performed on titanium alloys ...

    Authors: Yun-Hua Deng, Qiao Guan, Jun Tao and Bing Wu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:70
    Content type: Original Article Published on:

  24. In order to control the quality of spline shaft in rolling process, an efficient measurement method for rolling performance evaluation is essential. Here, a newly developed on-machine non-contact measurement p...

    Authors: Hong-Wei Li, Zhi-Qiang Liang, Jia-Jie Pei, Li Jiao, Li-Jing Xie and Xi-Bin Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:69
    Content type: Original Article Published on:

  25. Machining and installation errors are unavoidable in mechanical structures. However, the effect of errors on radial stiffness of the mechanical elastic wheel (ME-Wheel) is not considered in previous studies. T...

    Authors: You-Qun Zhao, Zhen Xiao, Fen Lin, Ming-Min Zhu and Yao-Ji Deng
    Citation: Chinese Journal of Mechanical Engineering 2018 31:68
    Content type: Original Article Published on:

  26. Surface texturing has been applied to improving the tribological performance of mechanical components for many years. Currently, the researches simulate the film pressure distribution of textured rough surface...

    Authors: Jing-Hu Ji, Cai-Wei Guan and Yong-Hong Fu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:67
    Content type: Original article Published on:

  27. Cable-driven parallel robots (CDPRs) are categorized as a type of parallel manipulators. In CDPRs, flexible cables are used to take the place of rigid links. The particular property of cables provides CDPRs se...

    Authors: Sen Qian, Bin Zi, Wei-Wei Shang and Qing-Song Xu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:66
    Content type: Review Published on:

  30. The electrically driven six-legged robot with high carrying capacity is an indispensable equipment for planetary exploration, but it hinders its practicability because of its low efficiency of carrying energy....

    Authors: Zhen Liu, Hong-Chao Zhuang, Hai-Bo Gao, Zong-Quan Deng and Liang Ding
    Citation: Chinese Journal of Mechanical Engineering 2018 31:63
    Content type: Original Article Published on:

  31. Textured surfaces are widely used in engineering components as they can improve tribological properties of sliding contacts, while the detailed behaviors of nanoscale reciprocating sliding contacts of textured...

    Authors: Rui-Ting Tong and Geng Liu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:62
    Content type: Original Article Published on:

  34. The research on legged robots attracted much attention both from the academia and industry. Legged robots are multi-input multi-output with multiple end-effector systems. Therefore, the mechanical design and c...

    Authors: Ling Fang and Feng Gao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:59
    Content type: Review Published on:

  35. Recently, plug-in hybrid electric bus has been one of the energy-efficient solutions for urban transportation. However, the current vehicle efficiency is far from optimum, because the unpredicted external driv...

    Authors: Qin-Pu Wang, Chao Yang, Ya-Hui Liu and Yuan-Bo Zhang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:58
    Content type: Original Article Published on:

  36. Current researches mainly focus on the investigations of the valve plate utilizing pressure relief grooves. However, air-release and cavitation can occur near the grooves. The valve plate utilizing damping hol...

    Authors: Shao-Gan Ye, Jun-Hui Zhang and Bing Xu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:57
    Content type: Original Article Published on:

  37. Double-roller clamping spinning (DRCS) is a new process for forming a thin-walled cylinder with a complex surface flange. The process requires a small spinning force, and can visibly improve forming quality an...

    Authors: Shu-Qin Fan, Sheng-Dun Zhao and Chao Chen
    Citation: Chinese Journal of Mechanical Engineering 2018 31:56
    Content type: Original Article Published on:

  39. Hybrid manipulators have potentially application in machining industries and attract extensive attention from many researchers on the basis of high stiffness and high dexterity. Therefore, in order to expand t...

    Authors: Dong-Sheng Zhang, Yun-Dou Xu, Jian-Tao Yao and Yong-Sheng Zhao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:54
    Content type: Research Published on:

  40. Due to the heat pipes’ transient conduction, phase change and fluid dynamics during cooling/heating with high frequency charging/discharging of batteries, it is crucial to investigate in depth the experimental...

    Authors: Fei-Fei Liu, Feng-Chong Lan, Ji-Qing Chen and Yi-Gang Li
    Citation: Chinese Journal of Mechanical Engineering 2018 31:53
    Content type: Original Article Published on:

  41. It is of a vital importance to reduce the frictional losses in marine diesel engines. Advanced surface textures have provided an effective solution to friction performance of rubbing pairs due to the rapid dev...

    Authors: Zhi-Wei Guo, Cheng-Qing Yuan, Xiu-Qin Bai and Xin-Ping Yan
    Citation: Chinese Journal of Mechanical Engineering 2018 31:52
    Content type: Original Article Published on:

  42. Finite element (FE) simulation is a powerful tool for investigating the mechanism of machining fiber-reinforced polymer composite (FRP). However in existing FE machining simulation works, the two-dimensional (...

    Authors: Yan-Li He, Joao-Paulo Davim and Hong-Qian Xue
    Citation: Chinese Journal of Mechanical Engineering 2018 31:51
    Content type: Research Published on:

  43. The existing mechanism parameter optimization (MPO) method of parallel mechanisms only considers the workspace size and ignores contribution of each configuration’s performance. So a novel MPO method is propos...

    Authors: Wei-Guo Wu and Li-Yang Gao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:50
    Content type: Original Article Published on:

  44. Dynamic characteristic significantly affects performance of RV reducer. The current researches mainly pay attention to free vibration properties of RV reducer. In order to satisfy the increasing demand on high...

    Authors: Yu-Hu Yang, Chuan Chen and Shi-Yu Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:49
    Content type: Original Article Published on:

  45. Boundary layer suction is an effective method used to delay separations in axial compressors. Most studies on boundary layer suction have focused on improving the performance of compressors, whereas few studie...

    Authors: Zhi-Yuan Cao, Bo Liu and Ting Zhang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:48
    Content type: Original Article Published on:

  46. Reliability assessment of the braking system in a high-speed train under small sample size and zero-failure data is very important for safe operation. Traditional reliability assessment methods are only perfor...

    Authors: Jian-Wei Yang, Jin-Hai Wang, Qiang Huang and Ming Zhou
    Citation: Chinese Journal of Mechanical Engineering 2018 31:47
    Content type: Original Article Published on:

  47. Roll flattening is an important component in the roll stack elastic deformation, which has important influence on controlling of the strip crown and flatness. Foppl formula and semi-infinite body model are the...

    Authors: Tao Wang, Qing-Xue Huang, Hong Xiao and Xiang-Dong Qi
    Citation: Chinese Journal of Mechanical Engineering 2018 31:46
    Content type: Original Article Published on:

  49. Unifying the models for topology design and kinematic analysis has long been a desire for the research of parallel kinematic machines (PKMs). This requires that analytical description, formulation and operatio...

    Authors: Tao Sun, Shuo-Fei Yang, Tian Huang and Jian S. Dai
    Citation: Chinese Journal of Mechanical Engineering 2018 31:44
    Content type: Original Article Published on:

  50. Nowadays, a highly integrated valve-controlled cylinder (HIVC) is applied to drive the joints of legged robots. Although the adoption of HIVC has resulted in high-performance robot control, the hydraulic force...

    Authors: Kai-Xian Ba, Bin Yu, Xiang-Dong Kong, Chun-He Li, Qi-Xin Zhu, Hua-Long Zhao and Ling-Jian Kong
    Citation: Chinese Journal of Mechanical Engineering 2018 31:43
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • Citation Impact 2023
    Journal Impact Factor: 4.6
    5-year Journal Impact Factor: 4.2
    Source Normalized Impact per Paper (SNIP): 1.637
    SCImago Journal Rank (SJR): 0.877

    Speed 2023
    Submission to first editorial decision (median days): 44
    Submission to acceptance (median days): 431

    Usage 2023
    Downloads: 814,514
    Altmetric mentions: 17

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)