Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 16 of 18

  1. Surfaces with controllable micro structures are significant in fundamental development of superhydrophobicity. However, preparation of superhydrophobic surfaces with array structures on metal substrates is not...

    Authors: Jing Sun, Wei Cheng, Jin-Long Song, Yao Lu, Yan-Kui Sun, Liu Huang, Xin Liu, Zhu-Ji Jin, Claire J. Carmalt and Ivan P. Parkin
    Citation: Chinese Journal of Mechanical Engineering 2018 31:72
    Content type: Original Article Published on:

  2. The surface quality of chamfer milling of stainless steel is closed related to the products of 3C (Computer, Communication and Consumer electronics), where a cutter is a major part to achieve that. Targeting a...

    Authors: Xian-Li Liu, Jin-Kui Shi, Wei Ji and Li-Hui Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:71
    Content type: Original Article Published on:

  3. In order to control the quality of spline shaft in rolling process, an efficient measurement method for rolling performance evaluation is essential. Here, a newly developed on-machine non-contact measurement p...

    Authors: Hong-Wei Li, Zhi-Qiang Liang, Jia-Jie Pei, Li Jiao, Li-Jing Xie and Xi-Bin Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:69
    Content type: Original Article Published on:

  4. Machining and installation errors are unavoidable in mechanical structures. However, the effect of errors on radial stiffness of the mechanical elastic wheel (ME-Wheel) is not considered in previous studies. T...

    Authors: You-Qun Zhao, Zhen Xiao, Fen Lin, Ming-Min Zhu and Yao-Ji Deng
    Citation: Chinese Journal of Mechanical Engineering 2018 31:68
    Content type: Original Article Published on:

  5. Surface texturing has been applied to improving the tribological performance of mechanical components for many years. Currently, the researches simulate the film pressure distribution of textured rough surface...

    Authors: Jing-Hu Ji, Cai-Wei Guan and Yong-Hong Fu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:67
    Content type: Original article Published on:

  6. Cable-driven parallel robots (CDPRs) are categorized as a type of parallel manipulators. In CDPRs, flexible cables are used to take the place of rigid links. The particular property of cables provides CDPRs se...

    Authors: Sen Qian, Bin Zi, Wei-Wei Shang and Qing-Song Xu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:66
    Content type: Review Published on:

  9. The electrically driven six-legged robot with high carrying capacity is an indispensable equipment for planetary exploration, but it hinders its practicability because of its low efficiency of carrying energy....

    Authors: Zhen Liu, Hong-Chao Zhuang, Hai-Bo Gao, Zong-Quan Deng and Liang Ding
    Citation: Chinese Journal of Mechanical Engineering 2018 31:63
    Content type: Original Article Published on:

  10. Textured surfaces are widely used in engineering components as they can improve tribological properties of sliding contacts, while the detailed behaviors of nanoscale reciprocating sliding contacts of textured...

    Authors: Rui-Ting Tong and Geng Liu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:62
    Content type: Original Article Published on:

  13. The research on legged robots attracted much attention both from the academia and industry. Legged robots are multi-input multi-output with multiple end-effector systems. Therefore, the mechanical design and c...

    Authors: Ling Fang and Feng Gao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:59
    Content type: Review Published on:

  14. Recently, plug-in hybrid electric bus has been one of the energy-efficient solutions for urban transportation. However, the current vehicle efficiency is far from optimum, because the unpredicted external driv...

    Authors: Qin-Pu Wang, Chao Yang, Ya-Hui Liu and Yuan-Bo Zhang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:58
    Content type: Original Article Published on:

  15. Current researches mainly focus on the investigations of the valve plate utilizing pressure relief grooves. However, air-release and cavitation can occur near the grooves. The valve plate utilizing damping hol...

    Authors: Shao-Gan Ye, Jun-Hui Zhang and Bing Xu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:57
    Content type: Original Article Published on:

  16. Double-roller clamping spinning (DRCS) is a new process for forming a thin-walled cylinder with a complex surface flange. The process requires a small spinning force, and can visibly improve forming quality an...

    Authors: Shu-Qin Fan, Sheng-Dun Zhao and Chao Chen
    Citation: Chinese Journal of Mechanical Engineering 2018 31:56
    Content type: Original Article Published on:

  18. Hybrid manipulators have potentially application in machining industries and attract extensive attention from many researchers on the basis of high stiffness and high dexterity. Therefore, in order to expand t...

    Authors: Dong-Sheng Zhang, Yun-Dou Xu, Jian-Tao Yao and Yong-Sheng Zhao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:54
    Content type: Research Published on:

  19. Due to the heat pipes’ transient conduction, phase change and fluid dynamics during cooling/heating with high frequency charging/discharging of batteries, it is crucial to investigate in depth the experimental...

    Authors: Fei-Fei Liu, Feng-Chong Lan, Ji-Qing Chen and Yi-Gang Li
    Citation: Chinese Journal of Mechanical Engineering 2018 31:53
    Content type: Original Article Published on:

  20. It is of a vital importance to reduce the frictional losses in marine diesel engines. Advanced surface textures have provided an effective solution to friction performance of rubbing pairs due to the rapid dev...

    Authors: Zhi-Wei Guo, Cheng-Qing Yuan, Xiu-Qin Bai and Xin-Ping Yan
    Citation: Chinese Journal of Mechanical Engineering 2018 31:52
    Content type: Original Article Published on:

  21. Finite element (FE) simulation is a powerful tool for investigating the mechanism of machining fiber-reinforced polymer composite (FRP). However in existing FE machining simulation works, the two-dimensional (...

    Authors: Yan-Li He, Joao-Paulo Davim and Hong-Qian Xue
    Citation: Chinese Journal of Mechanical Engineering 2018 31:51
    Content type: Research Published on:

  22. The existing mechanism parameter optimization (MPO) method of parallel mechanisms only considers the workspace size and ignores contribution of each configuration’s performance. So a novel MPO method is propos...

    Authors: Wei-Guo Wu and Li-Yang Gao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:50
    Content type: Original Article Published on:

  23. Dynamic characteristic significantly affects performance of RV reducer. The current researches mainly pay attention to free vibration properties of RV reducer. In order to satisfy the increasing demand on high...

    Authors: Yu-Hu Yang, Chuan Chen and Shi-Yu Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:49
    Content type: Original Article Published on:

  24. Boundary layer suction is an effective method used to delay separations in axial compressors. Most studies on boundary layer suction have focused on improving the performance of compressors, whereas few studie...

    Authors: Zhi-Yuan Cao, Bo Liu and Ting Zhang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:48
    Content type: Original Article Published on:

  25. Reliability assessment of the braking system in a high-speed train under small sample size and zero-failure data is very important for safe operation. Traditional reliability assessment methods are only perfor...

    Authors: Jian-Wei Yang, Jin-Hai Wang, Qiang Huang and Ming Zhou
    Citation: Chinese Journal of Mechanical Engineering 2018 31:47
    Content type: Original Article Published on:

  26. Roll flattening is an important component in the roll stack elastic deformation, which has important influence on controlling of the strip crown and flatness. Foppl formula and semi-infinite body model are the...

    Authors: Tao Wang, Qing-Xue Huang, Hong Xiao and Xiang-Dong Qi
    Citation: Chinese Journal of Mechanical Engineering 2018 31:46
    Content type: Original Article Published on:

  28. Unifying the models for topology design and kinematic analysis has long been a desire for the research of parallel kinematic machines (PKMs). This requires that analytical description, formulation and operatio...

    Authors: Tao Sun, Shuo-Fei Yang, Tian Huang and Jian S. Dai
    Citation: Chinese Journal of Mechanical Engineering 2018 31:44
    Content type: Original Article Published on:

  29. Nowadays, a highly integrated valve-controlled cylinder (HIVC) is applied to drive the joints of legged robots. Although the adoption of HIVC has resulted in high-performance robot control, the hydraulic force...

    Authors: Kai-Xian Ba, Bin Yu, Xiang-Dong Kong, Chun-He Li, Qi-Xin Zhu, Hua-Long Zhao and Ling-Jian Kong
    Citation: Chinese Journal of Mechanical Engineering 2018 31:43
    Content type: Original Article Published on:

  30. A light-weight design method of integrated structural topology and size co-optimization for the force-performance-structure of complex structural parts is presented in this paper. Firstly, the supporting funct...

    Authors: Ya-Li Ma, Jian-Rong Tan, De-Lun Wang and Zi-Zhe Liu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:42
    Content type: Original Article Published on:

  31. Subsurface damage is easily induced in machining of hard and brittle materials because of their particular mechanical and physical properties. It is detrimental to the strength, performance and lifetime of a m...

    Authors: Jing-fei Yin, Qian Bai and Bi Zhang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:41
    Content type: Review articles Published on:

  32. Fault feature extraction has a positive effect on accurate diagnosis of diesel engine. Currently, studies of fault feature extraction have focused on the time domain or the frequency domain of signals. However...

    Authors: Jian Zhang, Chang-Wen Liu, Feng-Rong Bi, Xiao-Bo Bi and Xiao Yang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:40
    Content type: Original Article Published on:

  34. For the purpose of improving the mechanical performance indices of uncertain structures with interval parameters and ensure their robustness when fluctuating under interval parameters, a constrained interval r...

    Authors: Jin Cheng, Zhen-Yu Liu, Jian-Rong Tan, Yang-Yan Zhang, Ming-Yang Tang and Gui-Fang Duan
    Citation: Chinese Journal of Mechanical Engineering 2018 31:38
    Content type: Original Article Published on:

  37. Capture is a key component for on-orbit service and space debris clean. The current research of capture on-orbit focuses on using special capture devices or full-actuated space arms to capture cooperative targ...

    Authors: Shang-Ling Qiao, Rong-Qiang Liu, Hong-Wei Guo, Yu-Xuan Liu and Zong-Quan Deng
    Citation: Chinese Journal of Mechanical Engineering 2018 31:35
    Content type: Original Article Published on:

  38. Product innovation is creation of new concepts to plan and realize technological and functional details in the product to satisfy market and customer needs. One of the key drivers to product innovation is reac...

    Authors: Qing-Jin Peng, Yun-Hui Liu, Jian Zhang and Pei-Hua Gu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:34
    Content type: Original Article Published on:

  39. Because of the limited space of the launch rockets, deployable mechanisms are always used to solve the phenomenon. One dimensional deployable mast can deploy and support antenna, solar sail and space optical c...

    Authors: Hui Yang, Hong-Wei Guo, Yan Wang, Rong-Qiang Liu and Meng Li
    Citation: Chinese Journal of Mechanical Engineering 2018 31:33
    Content type: Original Article Published on:

  40. Flow-induced vibration plays a positive role on heat transfer enhancement. Meanwhile, it is also a negative factor for fatigue strength. Satisfying the fatigue strength is the primary prerequisite for heat tra...

    Authors: De-Rong Duan, Pei-Qi Ge, Wen-Bo Bi and Yan-Ying Dong
    Citation: Chinese Journal of Mechanical Engineering 2018 31:32
    Content type: Original Article Published on:

  43. The current research of kinetostatic characteristics in flexure mechanisms mainly focus on the improvement of accuracy. To reduce or eliminate the parasitic motion is considered as an approach by using the com...

    Authors: Xiao-Bing He, Jing-Jun Yu, Wan-Wan Zhang and Guang-Bo Hao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:29
    Content type: Original Article Published on:

  45. Fractal theory provides scale-independent asperity contact loads and assumes variable curvature radii in the contact analyses of rough surfaces, the current research for which mainly focuses on the mechanism s...

    Authors: Song-Tao Hu, Wei-Feng Huang, Xiang-Feng Liu and Yu-Ming Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:27
    Content type: Original Article Published on:

  46. Load spectra research for bogie frame requires establishing the load-stress relationship on working condition, which has been omitted by the researchers. With the load-stress of the bogie frame of an intercity...

    Authors: Hua Zou, Shou-Guang Sun, Qiang Li and Zun-Song Ren
    Citation: Chinese Journal of Mechanical Engineering 2018 31:26
    Content type: Original Article Published on:

  47. The accurate control for the vehicle height and leveling adjustment system of an electronic air suspension (EAS) still is a challenging problem that has not been effectively solved in prior researches. This pa...

    Authors: Xiao-Qiang Sun, Ying-Feng Cai, Chao-Chun Yuan, Shao-Hua Wang and Long Chen
    Citation: Chinese Journal of Mechanical Engineering 2018 31:25
    Content type: Original Article Published on:

  48. Planetary gear systems have been widely used in transportation, construction, metallurgy, petroleum, aviation and other industrial fields. Under the same condition of power transmission, they have a more compa...

    Authors: Ming Li, Li-Yang Xie, Hai-Yang Li and Jun-Gang Ren
    Citation: Chinese Journal of Mechanical Engineering 2018 31:24
    Content type: Original Article Published on:

  49. Many researchers concentrate on improving the stiffness and stability of aerostatic bearings, however the contradiction between stiffness and stability is still existed. Therefore, orifice, multiple, and porou...

    Authors: Hai-Long Cui, Yang Wang, Bao-Rui Wang, Hong Yang and Huan Xia
    Citation: Chinese Journal of Mechanical Engineering 2018 31:23
    Content type: Original Article Published on:

  50. Spiral groove dry gas seal (S-DGS), the most widely used DGS in the world, encounters the problem of high leakage rate and inferior film stability when used in high-speed machinery equipment, which could not b...

    Authors: Jin-Bo Jiang, Xu-Dong Peng, Ji-Yun Li and Yuan Chen
    Citation: Chinese Journal of Mechanical Engineering 2018 31:21
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)