Skip to main content

Articles

Page 6 of 19

  1. Deep learning (DL) is progressively popular as a viable alternative to traditional signal processing (SP) based methods for fault diagnosis. However, the lack of explainability makes DL-based fault diagnosis m...

    Authors: Zuogang Shang, Zhibin Zhao and Ruqiang Yan
    Citation: Chinese Journal of Mechanical Engineering 2023 36:9
  2. When simulating the process from elastic–plastic deformation, damage to failure in a metal structure collision, it is necessary to use the large shell element due to the calculation efficiency, but this would ...

    Authors: Wen Liu, Lele Zhang, Yifan Ru, Geng Chen and Weiyuan Dou
    Citation: Chinese Journal of Mechanical Engineering 2023 36:8
  3. Online parameter identification is essential for the accuracy of the battery equivalent circuit model (ECM). The traditional recursive least squares (RLS) method is easily biased with the noise disturbances fr...

    Authors: Xinghao Du, Jinhao Meng, Kailong Liu, Yingmin Zhang, Shunli Wang, Jichang Peng and Tianqi Liu
    Citation: Chinese Journal of Mechanical Engineering 2023 36:7
  4. The use of terahertz time-domain spectroscopy (THz-TDS) for the nondestructive testing and evaluation (NDT&E) of materials and structural systems has attracted significant attention over the past two decades d...

    Authors: Walter Nsengiyumva, Shuncong Zhong, Manting Luo and Bing Wang
    Citation: Chinese Journal of Mechanical Engineering 2023 36:6
  5. This study is concerned with the surface integrity of Inconel 738LC parts manufactured by selective laser melting (SLM) followed by high-speed milling (HSM). In the investigation process of surface integrity, ...

    Authors: Guanhui Ren, Sai Guo and Bi Zhang
    Citation: Chinese Journal of Mechanical Engineering 2023 36:5
  6. Contour bevel gears have the advantages of high coincidence, low noise and large bearing capacity, which are widely used in automobile manufacturing, shipbuilding and construction machinery. However, when the ...

    Authors: Mingyang Wu, Jianyu Zhang, Chunjie Ma, Yali Zhang and Yaonan Cheng
    Citation: Chinese Journal of Mechanical Engineering 2023 36:4
  7. Hydroformed parts are widely used in industrial automotive parts because of their higher stiffness and fatigue strength and reduced weight relative to their corresponding cast and welded parts. This paper repo...

    Authors: Yu Huang, Jian Li, Jiachun Yang, Yongdong Peng and Weixuan Zhang
    Citation: Chinese Journal of Mechanical Engineering 2023 36:3
  8. Burnishing experiments with different burnishing parameters were performed on a computer numerical control milling machine to characterize the surface roughness of an aluminum alloy during burnishing. The chao...

    Authors: Zhipeng Yuan, Zhenyu Zhou, Zhiguo Jiang, Zeyu Zhao, Cong Ding and Zhongyu Piao
    Citation: Chinese Journal of Mechanical Engineering 2023 36:2
  9. Carbon nanotube (CNT) networks enable CNTs to be used as building blocks for synthesizing novel advanced materials, thus taking full advantage of the superior properties of individual CNTs. Multiscale analyses...

    Authors: Jiachao Ji, Yulin Jin, Anping Hua, Chunhua Zhu and Junhua Zhao
    Citation: Chinese Journal of Mechanical Engineering 2023 36:1
  10. In previous studies about the synchronization of vibrators, the restoring forces of springs are mainly treated as linear directly, whereas the nonlinear features are rarely considered in vibrating systems. To ...

    Authors: Xueliang Zhang, Zhenmin Li, Wenchao Hu and Bangchun Wen
    Citation: Chinese Journal of Mechanical Engineering 2022 35:151
  11. Proper braking force distribution strategies can improve both stability and economy performance of hybrid electric vehicles, which is prominently proved by many studies. To achieve better dynamic stable perfor...

    Authors: Zijun Liu, Shuo Cheng, Jinzhao Liu, Qiong Wu, Liang Li and Huawei Liang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:150
  12. An industrial robot with a six-axis force/torque sensor is usually used to produce a zero-gravity environment for testing space robotic operations. However, using traditional force control methods, such as adm...

    Authors: Jun He, Mingjin Shen, Feng Gao and Haibo Zhang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:149

    The Correction to this article has been published in Chinese Journal of Mechanical Engineering 2023 36:14

  13. Drilling is regarded as the most complex manufacturing process compared with other conventional machining processes. During the drilling process, most of the energy consumed in metal cutting is converted to he...

    Authors: Zhaoju Zhu, Xinhui Sun, Kai Guo, Jie Sun and Jianfeng Li
    Citation: Chinese Journal of Mechanical Engineering 2022 35:148
  14. Electric cable shovel (ECS) is a complex production equipment, which is widely utilized in open-pit mines. Rational valuations of load is the foundation for the development of intelligent or unmanned ECS, sinc...

    Authors: Tao Fu, Tianci Zhang, Yunhao Cui and Xueguan Song
    Citation: Chinese Journal of Mechanical Engineering 2022 35:147
  15. Engine mount system affects the automobile NVH performance. Active mounts would achieve excellent vibration isolation and relative displacement control performance in a broad frequency bandwidth by outputting ...

    Authors: Zhiyuan Si, Xianxu ‘Frank’ Bai, Lijun Qian and Peng Chen
    Citation: Chinese Journal of Mechanical Engineering 2022 35:146
  16. Thin-walled parts are typically difficult-to-cut components due to the complex dynamics in cutting process. The dynamics is variant for part during machining, but invariant for machine tool. The variation of t...

    Authors: Yuyang Tang, Jun Zhang, Jia Yin, Lele Bai, Huijie Zhang and Wanhua Zhao
    Citation: Chinese Journal of Mechanical Engineering 2022 35:145
  17. Two-speed clutchless automated manual transmission (AMT) has been widely implemented in electric vehicles for its simple structure and low cost. In contrast, due to the complex response characteristics of powe...

    Authors: Tong Liu, Xiaohua Zeng and Dafeng Song
    Citation: Chinese Journal of Mechanical Engineering 2022 35:144
  18. The recycling and remanufacturing of end-of-life products are significant for environmental protection and resource conservation. Disassembly is an essential process of remanufacturing end-of-life products. Ef...

    Authors: Hongfei Guo, Linsheng Zhang, Yaping Ren, Leilei Meng, Zhongwei Zhou and Jianqing Li
    Citation: Chinese Journal of Mechanical Engineering 2022 35:143
  19. Owing to superior comprehensive performance than conventional superalloys at high temperature, refractory high entropy alloy (RHEA) is becoming a promising candidate for the next generation high-temperature ma...

    Authors: Xiaochang Xie, Neng Li, Wei Liu, Shuai Huang, Xiaoyong He, Qiuying Yu, Huaping Xiong, Enhui Wang and Xinmei Hou
    Citation: Chinese Journal of Mechanical Engineering 2022 35:142
  20. Polishing plays an indispensable role in optical processing, especially for large-aperture optical reflective mirrors with freeform surfaces. Robotic polishing requires effective control of the contact force b...

    Authors: Jian Zhang, Liangxiao Zhao, Lingling Li, Fulei Ma and Guimin Chen
    Citation: Chinese Journal of Mechanical Engineering 2022 35:141
  21. Bimetallic copper-steel composite could be an effective structural material to improve the performance of traditional nickel-aluminum bronze (NAB) ship propeller due to its high structural strength and corrosi...

    Authors: Lu Zhao, Baorui Du, Jun Yao, Haitao Chen, Ruochen Ding and Kailun Li
    Citation: Chinese Journal of Mechanical Engineering 2022 35:140
  22. This paper presents a probe-based force-controlled nanoindentation method to fabricate ordered micro/nanostructures. Both the experimental and finite element simulation approaches are employed to investigate t...

    Authors: Yanquan Geng, Yuzhang Wang, Jianxiong Cai, Jingran Zhang and Yongda Yan
    Citation: Chinese Journal of Mechanical Engineering 2022 35:139
  23. The teleoperation of a 6 degrees-of-freedom (DOF) manipulator is one of the basic methods to extend people’s capabilities in the wide variety of applications. The master interface based on the force/torque (FT...

    Authors: Zihao Li, Fugui Xie, Yanlei Ye, Peng Li and Xinjun Liu
    Citation: Chinese Journal of Mechanical Engineering 2022 35:138
  24. Laser cladding is a new surface repair method that can improve the wear and corrosion resistance of substrate surfaces. However, the cladding layer typically exhibits a rough surface, high hardness and large r...

    Authors: Kaikui Zheng, Youxi Lin, Jianguo Cai and Chengqian Lei
    Citation: Chinese Journal of Mechanical Engineering 2022 35:137
  25. Recent developments have demonstrated that the brake pedal simulator (BPS) is becoming an indispensable apparatus for the break-by-wire systems in future electric vehicles. Its main function is to provide the ...

    Authors: Daoming Wang, Biao Wang, Bin Zi, Xianxu Bai and Wuwei Chen
    Citation: Chinese Journal of Mechanical Engineering 2022 35:136
  26. Selecting the optimal speed for dynamic obstacle avoidance in complex man–machine environments is a challenging problem for mobile robots inspecting hazardous gases. Consideration of personal space is importan...

    Authors: Xueshan Gao, Qingfang Zhang, Mingkang Li, Bingqing Lan, Xiaolong Fu and Jingye Li
    Citation: Chinese Journal of Mechanical Engineering 2022 35:135
  27. Noise, vibration and harshness (NVH) problems in vehicle engineering are always challenging in both traditional vehicles and intelligent vehicles. Although high accuracy manufacturing, modern structural roads ...

    Authors: Ning Zhang, Yuan Yang, Jianhua Wu, Ziqian Zhao and Guodong Yin
    Citation: Chinese Journal of Mechanical Engineering 2022 35:134
  28. Feature information extraction is one of the key steps in prognostics and health management of rotating machinery. In the present study, an investigation about the feasibility of a methodology based on general...

    Authors: Xiangnan Liu, Xuezhi Zhao and Kuanfang He
    Citation: Chinese Journal of Mechanical Engineering 2022 35:133
  29. With the continuous development of science and technology, electronic devices have begun to enter all aspects of human life, becoming increasingly closely related to human life. Users have higher quality requi...

    Authors: Jin Xie, Xinyu Li and Liang Gao
    Citation: Chinese Journal of Mechanical Engineering 2022 35:132
  30. A three-dimensional numerical model based on the volume-of-fluid (VOF) method is typically preferred for studying high-current gas metal arc welding (GMAW) metal transfer mechanism and then controlling it. It ...

    Authors: Lei Xiao, Ding Fan and Jiankang Huang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:131
  31. Reducing the radiated noise of a gearbox is a difficult problem in aviation, navigation, machinery, and other fields. Structural improvement is the main means of noise reduction for a gearbox, and it is realiz...

    Authors: Lan Liu, Kun Kang, Yingjie Xi, Zhengxi Hu, Jingyi Gong and Geng Liu
    Citation: Chinese Journal of Mechanical Engineering 2022 35:130
  32. Laser oscillating welding was employed to fabricate Al-Si coated press-hardened steel (PHS) to improve the element homogeneity in the fusion zone. Laser oscillating welding was employed with various oscillatio...

    Authors: Qian Sun, Zhenghui Zhang, Xiaonan Wang, Qingyu Zhang and Zhenguang Liu
    Citation: Chinese Journal of Mechanical Engineering 2022 35:129
  33. The pneumatic vibration isolator (PVI) plays an increasingly important role in precision manufacturing. In this paper, aiming to detect the performance of the pressure regulator in the PVI system, a PVI testin...

    Authors: Yan Shi, Shaofeng Xu, Zhibo Sun, Yulong Nie and Yixuan Wang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:128
  34. High-speed parallel robots have been extensively utilized in the light industry. However, the influence of the nonlinear dynamic characteristics of high-speed parallel robots on system’s dynamic response and s...

    Authors: Di Yang, Fugui Xie and Xinjun Liu
    Citation: Chinese Journal of Mechanical Engineering 2022 35:127
  35. The considerable heat treatment induced runout value in the end face of the automobile main reducer gear is always dimensionally out of tolerance. It directly affects the dimensional accuracy, the grade of car...

    Authors: Wen Shao, Mohan Yi, Jinyuan Tang and Siyuan Sun
    Citation: Chinese Journal of Mechanical Engineering 2022 35:126
  36. To address the problems of large welding deformation and splashing in the resistance spot welding of the lubricating oil cooler plate, the laser spot welding was employed, instead of the resistance spot weldin...

    Authors: Jia Liu, Tao Jiang, Yan Shi, Hongyin Zhu and Yuchi Dai
    Citation: Chinese Journal of Mechanical Engineering 2022 35:125
  37. In the present study, the over-constrained hybrid manipulator R(2RPR)R/SP+RR is considered as the research objective. In this paper, kinematics of the hybrid manipulator, including the forward and inverse posi...

    Authors: Yundou Xu, Fan Yang, Youen Mei, Dongsheng Zhang, Yulin Zhou and Yongsheng Zhao
    Citation: Chinese Journal of Mechanical Engineering 2022 35:123
  38. The manufacturing of spiral groove structure of two-dimensional valve (2D valve) feedback mechanism has shortcomings of both high cost and time-consuming. This paper presents a novel configuration of rotary el...

    Authors: Bin Meng, Mingzhu Dai, Chenhang Zhu, Chenchen Zhang, Chuan Ding and Jian Ruan
    Citation: Chinese Journal of Mechanical Engineering 2022 35:122
  39. Existing models of bulk modulus for aerated hydraulic fluids primarily focus on the effects of pressure and air fraction, whereas the effect of temperature on bulk modulus is disregarded. Based on the lumped p...

    Authors: Xiaoming Yuan, Weiqi Wang, Xuan Zhu and Lijie Zhang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:121
  40. Autonomous vehicles require safe motion planning in uncertain environments, which are largely caused by surrounding vehicles. In this paper, a driving environment uncertainty-aware motion planning framework is...

    Authors: Xiaolin Tang, Kai Yang, Hong Wang, Wenhao Yu, Xin Yang, Teng Liu and Jun Li
    Citation: Chinese Journal of Mechanical Engineering 2022 35:120
  41. For the development of a parallel mechanism (PM), it is necessary to establish a dynamic model which can accurately meet the requirements of real-time control. Compared with the general dynamic analysis model ...

    Authors: Ke Wang, Ju Li, Huiping Shen, Jingjing You and Tingli Yang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:119
  42. Solid contamination existing as solid particles in power fluid transmission systems may lead to transmission performance reduction, system failures, and component damage. The hydraulic reservoir will deposit t...

    Authors: Mandi Li, Decai Kong, Qi Guo, Xiangyu Liu, Jing Yao, Jianjun Hu and Lijuan Chen
    Citation: Chinese Journal of Mechanical Engineering 2022 35:118
  43. Water-based lubrication is an effective method to achieve superlubricity, which implies a friction coefficient in the order of 10−3 or lower. Recent numerical, analytical, and experimental studies confirm that th...

    Authors: Shuowen Zhang, Mingbo Zhao and Chenhui Zhang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:117
  44. Measuring and reconstructing the shape of workpieces have been considered as a fundamental step in both reverse engineering and product quality control. Owing to increasing structural complexity of recent prod...

    Authors: Zexiao Xie, Ping Yu, Hanlei Gong, Shukai Chi and Xiang Gao
    Citation: Chinese Journal of Mechanical Engineering 2022 35:116
  45. Industrial robots are increasingly being used in machining tasks because of their high flexibility and intelligence. However, the low structural stiffness of a robot significantly affects its positional accura...

    Authors: Jiachen Jiao, Wei Tian, Lin Zhang, Bo Li, Junshan Hu, Yufei Li, Dawei Li and Jianlong Zhang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:115
  46. Fishes have learned how to achieve outstanding swimming performance through the evolution of hundreds of millions of years, which can provide bio-inspiration for robotic fish design. The premise of designing a...

    Authors: Yanwen Liu and Hongzhou Jiang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:114
  47. The kinematic redundancy is considered as a way to improve the performance of the parallel mechanism. In this paper, the kinematics performance of a three degree-of-freedom parallel mechanism with kinematic re...

    Authors: Chaoyu Shen, Haibo Qu, Sheng Guo and Xiao Li
    Citation: Chinese Journal of Mechanical Engineering 2022 35:113
  48. The simulation and planning system (SPS) requires accurate and real-time feedback regarding the deformation of soft tissues during the needle insertion procedure. Traditional mechanical-based models such as th...

    Authors: Yong Lei, Murong Li and Dedong Gao
    Citation: Chinese Journal of Mechanical Engineering 2022 35:112
  49. Low excitation voltage for an electromagnetic acoustic transducer (EMAT) is necessary for the petrochemical equipment and facilities inspection, which work at high-temperatures, to avoid potential explosion. H...

    Authors: Jinjie Zhou, Shuaijie Zhao, Yang Zheng, Xingquan Shen and Jitang Zhang
    Citation: Chinese Journal of Mechanical Engineering 2022 35:111

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • Citation Impact 2023
    Journal Impact Factor: 4.6
    5-year Journal Impact Factor: 4.2
    Source Normalized Impact per Paper (SNIP): 1.637
    SCImago Journal Rank (SJR): 0.877

    Speed 2023
    Submission to first editorial decision (median days): 44
    Submission to acceptance (median days): 431

    Usage 2023
    Downloads: 814,514
    Altmetric mentions: 17

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC