Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 15 of 18

  1. Considerable studies have been carried out on fault diagnosis of gears, with most of them concentrated on conventional vibration analysis. However, besides the complexity of gear dynamics, the diagnosis result...

    Authors: Lin Liang, Fei Liu, Xiangwei Kong, Maolin Li and Guanghua Xu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:9
    Content type: Original Article Published on:

  3. It is a challenging issue to detect bearing fault under nonstationary conditions and gear noise interferences. Meanwhile, the application of the traditional methods is limited by their deficiencies in the aspe...

    Authors: Dezun Zhao, Jianyong Li, Weidong Cheng and Zhiyang He
    Citation: Chinese Journal of Mechanical Engineering 2019 32:7
    Content type: Original Article Published on:

  4. Compact hot extrusion (CHE) process of heavy caliber thick-wall pipe is a new material-saving production process. In order to reveal the optimum hot extrusion parameters in CHE process, the effects of the extr...

    Authors: Lu Jia, Yongtang Li, Tianjing Hui and Yang Zhang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:6
    Content type: Original Article Published on:

  5. The current investigations primarily focus on using advanced suspensions to overcome the tradeoff design of ride comfort and handling performance for mining vehicles. It is generally realized by adjusting spri...

    Authors: Jie Zhang, Yuanwang Deng, Nong Zhang, Bangji Zhang, Hengmin Qi and Minyi Zheng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:5
    Content type: Original Article Published on:

  6. The annular volute is typically used in a slurry pump to reduce the collisions between solid particles and the volute tongue and to achieve a better resistance to blocking. However, only limited studies regard...

    Authors: Yi Tao, Shouqi Yuan, Jianrui Liu and Fan Zhang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:4
    Content type: Original Article Published on:

  8. Micro milling is a flexible and economical method to fabricate micro components with three-dimensional geometry features over a wide range of engineering materials. But the surface roughness and micro topograp...

    Authors: Wanqun Chen, Yazhou Sun, Dehong Huo and Xiangyu Teng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:2
    Content type: Original Article Published on:

  9. Grinding chatter is a self-induced vibration which is unfavorable to precision machining processes. This paper proposes a forecasting method for grinding state identification based on bivarition empirical mode...

    Authors: Huan-Guo Chen, Jian-Yang Shen, Wen-Hua Chen, Chun-Shao Huang, Yong-Yu Yi and Jia-Cheng Qian
    Citation: Chinese Journal of Mechanical Engineering 2019 32:1
    Content type: Original Article Published on:

  10. The mechanical and wear properties of CFRP laminate were investigated using a method of cycling low velocity impact, to study the trend and mechanism of impact resistance of the CFRP laminate under repeated im...

    Authors: Yang Sun, Zhen-Bing Cai, Song-Bo Wu, Jian-Hua Liu and Jia-Xin Yu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:112
    Content type: Original Article Published on:

  12. The trajectory tracking control problem is addressed for autonomous underwater vehicle (AUV) in marine environment, with presence of the influence of the uncertain factors including ocean current disturbance, ...

    Authors: Chao Yang, Feng Yao and Ming-Jun Zhang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:110
    Content type: Original Article Published on:

  13. The contact stiffness of a mechanical bonding surface is an important parameter in determining the normal and radial contact force. To improve the calculation accuracy of the contact force model, the surface r...

    Authors: Shi-Hua Li, Xue-Yan Han, Jun-Qi Wang, Jing Sun and Fu-Juan Li
    Citation: Chinese Journal of Mechanical Engineering 2018 31:109
    Content type: Original Article Published on:

  14. The selective laser melting (SLM) method has a great potential for fabricating injection mold with complex structure. However, the microstructure and performance of the SLM molds show significantly different f...

    Authors: Shi-Feng Wen, Xian-Tai Ji, Yan Zhou, Chang-Jun Han, Qing-Song Wei and Yu-Sheng Shi
    Citation: Chinese Journal of Mechanical Engineering 2018 31:108
    Content type: Original Article Published on:

  15. The information transmission path optimization (ITPO) can often affect the efficiency and accuracy of remanufacturing service. However, there is a greater degree of uncertainty and complexity in information tr...

    Authors: Lei Wang, Xu-Hui Xia, Jian-Hua Cao, Xiang Liu and Jun-Wei Liu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:107
    Content type: Original Article Published on:

  16. There are many achievements in the field of analytical mechanics, such as Lagrange Equation, Hamilton’s Principle, Kane’s Equation. Compared to Newton–Euler mechanics, analytical mechanics have a wider range o...

    Authors: Xiao-Min Zhao, Ye-Hwa Chen, Han Zhao and Fang-Fang Dong
    Citation: Chinese Journal of Mechanical Engineering 2018 31:106
    Content type: Review Published on:

  17. To improve the design speed and reduce the design cost for the previous blade design method, a modified inverse design method is presented. In the new method, after a series of physical and mathematical simpli...

    Authors: Ye-Ming Lu, Xiao-Fang Wang, Wei Wang and Fang-Ming Zhou
    Citation: Chinese Journal of Mechanical Engineering 2018 31:105
    Content type: Original Article Published on:

  18. Time-variant excitations in planetary gear trains can cause excessive noise and vibration and even damage the system on a permanent basis. This paper focuses on the elastic vibrations of a helical planetary ri...

    Authors: Shi-Yu Wang and Chanannipat Meesap
    Citation: Chinese Journal of Mechanical Engineering 2018 31:104
    Content type: Original Article Published on:

  20. The beer game model is a typical paradigm used to study complex dynamics behaviours in production–distribution systems. The model, however, does not accord with current practical supply chain system models in ...

    Authors: Wen Wang and Wei-Ping Fu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:102
    Content type: Original Article Published on:

  21. Filament winding has emerged as the main process for carbon fiber reinforced plastic (CFRP) fabrication, and tension control plays a key role in enhancing the quality of the winding products. With the continuo...

    Authors: Xiao-Ming Xu, Wu-Xiang Zhang, Xi-Lun Ding, Ming Zhang and Shi-Hou Wei
    Citation: Chinese Journal of Mechanical Engineering 2018 31:101
    Content type: Original Article Published on:

  22. Overtaking accidents caused by improper operations performed by a driver occur frequently. However, most studies on overtaking safety have neglected research into driver control input. A novel method is propos...

    Authors: You-Qun Zhao, Xing-Long Zhang, Wen-Xin Zhang and Fen Lin
    Citation: Chinese Journal of Mechanical Engineering 2018 31:100
    Content type: Original Article Published on:

  23. During the oscillating twin-roll strip casting process, the quality of final products is directly influenced by the flow field distribution of molten metal in the pool. The variation in the flow field is cause...

    Authors: Zhi-Qiang Xu, Zhe-Ru Meng, Shun-Hui Xue, De-Quan Zhang and Feng-Shan Du
    Citation: Chinese Journal of Mechanical Engineering 2018 31:99
    Content type: Original Article Published on:

  24. Adhesion of cutting tool and chip often occurs when machining stainless steels with cemented carbide tools. Wear mechanism of cemented carbide tool in high speed milling of stainless steel 0Cr13Ni4Mo was studi...

    Authors: Guang-Jun Liu, Zhao-Cheng Zhou, Xin Qian, Wei-Hai Pang, Guang-Hui Li and Guang-Yu Tan
    Citation: Chinese Journal of Mechanical Engineering 2018 31:98
    Content type: Original Article Published on:

  25. Lower surface roughness and sharper cutting edge are beneficial for improving the machining quality of the cutting tool, while coatings often deteriorate them. Focusing on the diamond coated WC-Co milling cutt...

    Authors: Xin-Chang Wang, Cheng-Chuan Wang, Chang-Ying Wang and Fang-Hong Sun
    Citation: Chinese Journal of Mechanical Engineering 2018 31:97
    Content type: Original Article Published on:

  27. Natural characteristics of thin-wall pipe of the compressor under uniformly distributed pressure were presented in this paper based on a cylindrical shell model. In the traditional method, the beam model was u...

    Authors: Chao-Feng Li, Qian-Sheng Tang, Hou-Xin She and Bang-Chun Wen
    Citation: Chinese Journal of Mechanical Engineering 2018 31:95
    Content type: Original Article Published on:

  28. Robot hands have been developing during the last few decades. There are many mechanical structures and analytical methods for different hands. But many tough problems still limit robot hands to apply in homeli...

    Authors: Pei-Chen Wu, Nan Lin, Ting Lei, Qian Cheng, Jin-Ze Wu and Xiao-Ping Chen
    Citation: Chinese Journal of Mechanical Engineering 2018 31:94
    Content type: Original Article Published on:

  29. Currently, when magnesium alloy sheet is rolled, the method of controlling roll temperature is simple and inaccurate. Furthermore, roll temperature has a large influence on the quality of magnesium alloy sheet...

    Authors: Jing-Feng Zou, Li-Feng Ma, Guo-Hua Zhang, Zhi-Quan Huang, Jin-Bao Lin and Peng-Tao Liu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:93
    Content type: Original Article Published on:

  30. This paper proposes a new method for measurement of the roll error motion of a slide table in a precision linear slide. The proposed method utilizes a pair of clinometers in the production process of a precisi...

    Authors: Yuki Shimizu, Satoshi Kataoka and Wei Gao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:92
    Content type: Original Article Published on:

  32. The problem of chatter vibration is associated with adverse consequences that often lead to tool impairment and poor surface finished in a workpiece, and thus, controlling or suppressing chatter vibrations is ...

    Authors: Bashir Bala Muhammad, Min Wan, Yang Liu and Heng Yuan
    Citation: Chinese Journal of Mechanical Engineering 2018 31:90
    Content type: Original Article Published on:

  33. In order to solve the problem of substantial computational resources of lattice structure during optimization, a local relative density mapping (LRDM) method is proposed. The proposed method uses solid isotrop...

    Authors: Guo-Hua Song, Shi-Kai Jing, Fang-Lei Zhao, Ye-Dong Wang, Hao Xing and Long-Fei Qie
    Citation: Chinese Journal of Mechanical Engineering 2018 31:89
    Content type: Original Article Published on:

  34. Due to operational wear and uneven carbon absorption in compressor and turbine wheels, the unbalance (me) vibration is induced and could lead to sub-synchronous vibration accidents for high-speed turbocharger (TC...

    Authors: Guang-Fu Bin, Yuan Huang, Shuai-Ping Guo, Xue-Jun Li and Gang Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:88
    Content type: Original Article Published on:

  35. The spherical plain bearing test bench is a necessary detecting equipment in the research process of self-lubricating spherical plain bearings. The varying environmental temperatures cause the thermal deformat...

    Authors: Zhan-Qi Hu, Wei Li, Yu-Lin Yang, Bing-Li Fan and Hai-Li Zhou
    Citation: Chinese Journal of Mechanical Engineering 2018 31:87
    Content type: Original Article Published on:

  36. The process of the gas jet from aircraft engines impacting a jet blast deflector is not only a complex fluid–solid coupling problem that is not easy to compute, but also a safety issue that seriously interfere...

    Authors: Fu-Dong Gao, De-Xin Wang, Hai-Dong Wang and Ming-Ming Jia
    Citation: Chinese Journal of Mechanical Engineering 2018 31:86
    Content type: Original Article Published on:

  37. The dynamic recrystallization (DRX) simulation performance largely depends on simulated grain topological structures. However, currently solutions used different models for describing two-dimensional (2D) and ...

    Authors: Yi-Na Guo, Yong-Tang Li, Wen-Yan Tian, Hui-Ping Qi and Hong-Hong Yan
    Citation: Chinese Journal of Mechanical Engineering 2018 31:85
    Content type: Original Article Published on:

  38. Many DNA-based devices need to build stable and controllable DNA films on surfaces. However, the most commonly used method of film characterization, namely, the probe-like microscopes which may destroy the sam...

    Authors: Gui-Bin Shen, Ya-Jing Kan, Min-Hua Chen and Yun-Fei Chen
    Citation: Chinese Journal of Mechanical Engineering 2018 31:84
    Content type: Original Article Published on:

  39. Researchers face difficulties in studying the effects of driveline efficiency on car fuel economy via bench and road tests because of long working periods, high costs, and heavy workloads. To simplify the stud...

    Authors: Yu-Long Lei, Yu-Zhe Jia, Yao Fu, Ke Liu, Ying Zhang and Zhen-Jie Liu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:83
    Content type: Original Article Published on:

  40. Constant stress accelerated life tests (ALTs) can be applied to obtain a high estimation accuracy of reliability measurements, but these are time-consuming tests. Progressive stress ALTs can yield failures mor...

    Authors: Wen-Hua Chen, Fan Yang, Ping Qian, Jun Pan and Qing-Chuan He
    Citation: Chinese Journal of Mechanical Engineering 2018 31:82
    Content type: Original Article Published on:

  42. In spectrum analysis of induction motor current, the characteristic components of broken rotor bars (BRB) fault are often submerged by the fundamental component. Although many detection methods have been propo...

    Authors: Pan-Pan Wang, Xiao-Xiao Chen, Yong Zhang, Yong-Jun Hu and Chang-Xin Miao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:80
    Content type: Original Article Published on:

  43. Rare earth (RE) elements have positive effects on Al alloy, while most research is focused on microstructure and mechanical properties. As important application indices, toughness and plasticity are properties...

    Authors: Ting-Biao Guo, Feng Zhang, Wan-Wu Ding and Zhi Jia
    Citation: Chinese Journal of Mechanical Engineering 2018 31:79
    Content type: Original Article Published on:

  44. Retinal surgery continues to be one of the most technical demanding surgeries for its high manipulation accuracy requirement, small and constrained workspace, and delicate retinal tissue. Robotic systems have ...

    Authors: Chang-Yan He, Long Huang, Yang Yang, Qing-Feng Liang and Yong-Kang Li
    Citation: Chinese Journal of Mechanical Engineering 2018 31:78
    Content type: Original Article Published on:

  45. Rubik’s Cube is a widely popular mechanical puzzle that has attracted attention around the world because of its unique characteristics. As a classic brain-training toy well known to the public, Rubik’s Cube wa...

    Authors: Da-Xing Zeng, Ming Li, Juan-Juan Wang, Yu-Lei Hou, Wen-Juan Lu and Zhen Huang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:77
    Content type: Review Published on:

  46. Point features, as the basis of lines, surfaces, and bodies, are commonly used in medical image registration. To obtain an elegant spatial transformation of extracted feature points, many point set matching al...

    Authors: Shao-Ya Guan, Tian-Miao Wang, Cai Meng and Jun-Chen Wang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:76
    Content type: Review Published on:

  47. Many design engineers in cross-domain industries have attended training classes of TRIZ to improve their innovative abilities in China. Most of them are successful, but others are not. So the latest target of ...

    Authors: Run-Hua Tan, Ya-Fan Dong, Bo-Jun Yang and Peng Zhang
    Citation: Chinese Journal of Mechanical Engineering 2018 31:75
    Content type: Original Article Published on:

  48. Wire and arc additive manufacturing (WAAM) shows a great promise for fabricating fully dense metal parts by means of melting materials in layers using a welding heat source. However, due to a large layer heigh...

    Authors: Jun Xiong, Yan-Jiang Li, Zi-Qiu Yin and Hui Chen
    Citation: Chinese Journal of Mechanical Engineering 2018 31:74
    Content type: Original Article Published on:

  49. It is a great challenge to find effective atomizing technology for reducing industrial pollution; the twin-fluid atomizing nozzle has drawn great attention in this field recently. Current studies on twin-fluid...

    Authors: Bo Chen, Dian-Rong Gao, Shao-Feng Wu and Jian-Hua Zhao
    Citation: Chinese Journal of Mechanical Engineering 2018 31:73
    Content type: Original Article Published on:

  50. Thermal self-compressing bonding (TSCB) is a new solid-state bonding method pioneered by the authors. With electron beam as the non-melted heat source, previous experimental study performed on titanium alloys ...

    Authors: Yun-Hua Deng, Qiao Guan, Jun Tao and Bing Wu
    Citation: Chinese Journal of Mechanical Engineering 2018 31:70
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)