Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 13 of 18

  1. Friction stir welding (FSW) has been widely applied in many fields as an alternative to traditional fusion welding. Although serial robots can provide the orientation capability required to weld along curved s...

    Authors: Xinxue Chai, Ningbin Zhang, Leiying He, Qinchuan Li and Wei Ye
    Citation: Chinese Journal of Mechanical Engineering 2020 33:1
    Content type: Original Article Published on:

  2. The current research of seawater hydraulic motor mainly focused on piston motor and vane motor, but seldom regarded low speed high torque seawater hydraulic motor. Low speed high torque seawater hydraulic moto...

    Authors: Zhiqiang Wang, Shaofeng Wu, Dianrong Gao and Shuncai Wang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:108
    Content type: Original Article Published on:

  3. To improve the adaptability of TBMs in diverse geological environments, this paper proposes a reconfigurable Type-V thrust mechanism (V-TM) with rearrangeable working states, in which structural stiffness can ...

    Authors: Younan Xu, Xinjun Liu and Jiyu Xu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:107
    Content type: Original Article Published on:

  4. In eddy current testing, the law of attenuation of eddy current (EC) is of great concern. In conductive half space under the excitation of uniform magnetic field, the EC density decreases exponentially in the ...

    Authors: Zhiwei Zeng, Pengcheng Ding, Jiayi Li, Shaoni Jiao, Junming Lin and Yonghong Dai
    Citation: Chinese Journal of Mechanical Engineering 2019 32:106
    Content type: Original Article Published on:

  5. Composite sucker rod has been extensively used due to its high strength, light weight and corrosion resistive nature. However, such composite sucker rod is difficult for conventional non-destructive evaluation...

    Authors: Kefan Wang, Xiaokang Yin, Chen Li, Wei Li and Guoming Chen
    Citation: Chinese Journal of Mechanical Engineering 2019 32:105
    Content type: Original Article Published on:

  6. Magnetic Barkhausen Noise (MBN) method is known as an effective nondestructive evaluation (NDE) method for evaluation of residual stress in ferromagnetic materials. Some studies on the feasibility of the MBN m...

    Authors: Manru He, Takanori Matsumoto, Tetsuya Uchimoto, Toshiyuki Takagi, Hongen Chen, Shejuan Xie and Zhenmao Chen
    Citation: Chinese Journal of Mechanical Engineering 2019 32:104
    Content type: Original Article Published on:

  7. The accurate performance evaluation of a cutterhead is essential to improving cutterhead structure design and predicting project cost. Through extensive research, this paper evaluates the performance of a tunn...

    Authors: Ye Zhu, Wei Sun, Junzhou Huo and Zhichao Meng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:103
    Content type: Original Article Published on:

  9. Full-face hard rock tunnel boring machines (TBM) are essential equipment in highway and railway tunnel engineering construction. During the tunneling process, TBM have serious vibrations, which can damage some...

    Authors: Jianfeng Tao, Junbo Lei, Chengliang Liu and Wei Yuan
    Citation: Chinese Journal of Mechanical Engineering 2019 32:101
    Content type: Original Article Published on:

  10. Mobile machinery energy efficiency and emission pollution are the national and worldwide issues. This paper contributes in solving these problems by applying a speed variable power source. Unfortunately, almos...

    Authors: Lei Ge, Long Quan, Xiaogang Zhang, Zhixin Dong and Jing Yang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:100
    Content type: Original Article Published on:

  12. The cutterhead of a full-face rock tunnel boring machine (TBM) is constantly subjected to varying impact and dynamic loads during tunneling processes, resulting in relatively large vibrations that could easily...

    Authors: Laikuang Lin, Yimin Xia, Zhengguang Li, Caizhang Wu, Yongliang Cheng and Qing Tan
    Citation: Chinese Journal of Mechanical Engineering 2019 32:98
    Content type: Original Article Published on:

  13. Ultrasonic welding is an effective ways to achieve a non-reactive/immiscible heterogeneous metal connection, such as the connection of magnesium alloy and titanium alloy. But the thermal mechanism of magnesium...

    Authors: Dewang Zhao, Daxin Ren, Kunmin Zhao, Pan Sun, Xinglin Guo and Liming Liu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:97
    Content type: Original Article Published on:

  14. The scattered fields of plane waves in a solid from a cylinder or sphere are critical in determining its acoustic characteristics as well as in engineering applications. This paper investigates the scattered f...

    Authors: Xiaozhou Liu, Jian Ma, Haibin Wang, Sha Gao, Yifeng Li and Jiehui Liu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:96
    Content type: Original Article Published on:

  16. As the manufacturing industry is facing increasingly serious environmental problems, because of which carbon tax policies are being implemented, choosing the optimum cutting parameters during the machining pro...

    Authors: Zhipeng Jiang, Dong Gao, Yong Lu and Xianli Liu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:94
    Content type: Original Article Published on:

  18. Aluminum–Lithium (Al–Li) alloy is a topic of great interest owing to its high strength and light weight, but there are only a few applications of Al–Li alloy in wire + arc additive manufacturing (WAAM) process...

    Authors: Hao Zhong, Bojin Qi, Baoqiang Cong, Zewu Qi and Hongye Sun
    Citation: Chinese Journal of Mechanical Engineering 2019 32:92
    Content type: Original Article Published on:

  20. The current researches mainly adopt “Guide to the expression of uncertainty in measurement (GUM)” to calculate the profile error. However, GUM can only be applied in the linear models. The standard GUM is not ...

    Authors: Chenhui Liu, Zhanjie Song, Yicun Sang and Gaiyun He
    Citation: Chinese Journal of Mechanical Engineering 2019 32:90
    Content type: Original Article Published on:

  21. Direct kinematics with analytic solutions is critical to the real-time control of parallel mechanisms. Therefore, the type synthesis of a mechanism having explicit form of forward kinematics has become a topic...

    Authors: Haitao Liu, Ke Xu, Huiping Shen, Xianlei Shan and Tingli Yang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:89
    Content type: Original Article Published on:

  22. The safety of trains, a highly efficient mode of transportation, has attracted significant attention. In the vehicle structure design of a train, the evaluation of the passenger evacuation time is necessary. T...

    Authors: Hanzhao Qiu and Weining Fang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:88
    Content type: Original Article Published on:

  23. Sharp corners usually are used on glass contours to meet the highly increasing demand for personalized products, but they result in a broken wheel center toolpath in edge grinding. To ensure that the whole whe...

    Authors: Kun Ren, Yujia Pan, Danyan Jiang, Jun Pan, Wenhua Chen and Xuxiao Hu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:87
    Content type: Original Article Published on:

  24. Product innovation can be achieved by analyzing leading products patents in the market. Different methods have been proposed for design around patent, commonly using the elimination or replacement of a single ...

    Authors: Hui Li, Jiefeng Yuan, Runhua Tan and Qingjin Peng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:86
    Content type: Original Article Published on:

  27. As energy crisis and environment pollution all around the world threaten the widespread use of fossil fuels, compressed natural gas (CNG) vehicles are explored as an alternative to the conventional gasoline po...

    Authors: Hyoseo Kwak, Gunyoung Park, Hansaem Seong and Chul Kim
    Citation: Chinese Journal of Mechanical Engineering 2019 32:83
    Content type: Original Article Published on:

  28. The magnetic properties of the claw pole have a direct effect on the output power of a generator. Many methods can be used to measure these magnetic properties, each with its own advantages, but an important s...

    Authors: Chengliang Hu, Xuejiao Bai, Minjun Tang, Xiaofeng Tang and Zhen Zhao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:82
    Content type: Original Article Published on:

  29. High-dispersed nanoscale Cu precipitates often contribute to extremely high strength due to precipitation hardening, and whereas usually lead to degraded toughness for especially ferritic steels. Hence, it is ...

    Authors: Lizhan Han, Qingdong Liu and Jianfeng Gu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:81
    Content type: Original Article Published on:

  30. The hydro-viscous drive (HVD) has been widely used in fan transmission in vehicles, fans, and scraper conveyors for step-less speed regulation or soft starting. In the mixed friction stage, the contact, fricti...

    Authors: Hongwei Cui, Qiliang Wang, Zisheng Lian and Long Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:80
    Content type: Original Article Published on:

  31. A bionic flexible manipulator driven by pneumatic muscle actuator (PMA) can better reflect the flexibility of the mechanism. Current research on PMA mainly focuses on the modeling and control strategy of the p...

    Authors: Kai Liu, Yining Chen, Jiaqi Xu, Yang Wu, Yonghua Lu and Dongbiao Zhao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:79
    Content type: Original Article Published on:

  32. In current research on soft grippers, pneumatically actuated soft grippers are generally fabricated using fully soft materials, which have the advantage of flexibility as well as the disadvantages of a small g...

    Authors: Zhaoping Wu, Xiaoning Li and Zhonghua Guo
    Citation: Chinese Journal of Mechanical Engineering 2019 32:78
    Content type: Original Article Published on:

  33. There are vast constraint equations in conventional dynamics analysis of deployable structures, which lead to differential-algebraic equations (DAEs) solved hard. To reduce the difficulty of solving and the am...

    Authors: Qi’an Peng, Sanmin Wang, Changjian Zhi and Bo Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:77
    Content type: Original Article Published on:

  34. Earings appear easily during deep drawing of cylindrical parts owing to the anisotropic properties of materials. However, current methods cannot fully utilize the mechanical properties of material, and the num...

    Authors: Haibo Wang, Mingliang Men, Yu Yan, Min Wan and Qiang Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:76
    Content type: Original Article Published on:

  36. Lower limb rehabilitation exoskeleton robots integrate sensing, control, and other technologies and exhibit the characteristics of bionics, robotics, information and control science, medicine, and other interd...

    Authors: Di Shi, Wuxiang Zhang, Wei Zhang and Xilun Ding
    Citation: Chinese Journal of Mechanical Engineering 2019 32:74
    Content type: Review Published on:

  37. Traditional simulation methods are unable to meet the requirements of lunar takeoff simulations, such as high force output precision, low cost, and repeated use. Considering that cable-driven parallel mechanis...

    Authors: Wangmin Yi, Yu Zheng, Weifang Wang, Xiaoqiang Tang, Xinjun Liu and Fanwei Meng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:73
    Content type: Original Article Published on:

  38. By studying the effects of geometric precision on kinematic accuracy, an error mapping model has been established, based on the hypothesis that a motion pair and its installation surface are rigid. However, wh...

    Authors: Yanbing Ni, Haiyang Zhou, Cuiyan Shao and Jinhe Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:72
    Content type: Original Article Published on:

  39. When the gearbox body interference is connected to the ring gear, prestressing occurs in the ring gear, which has a significant impact on the strength and life of the gear. Research on the prestressing of the ...

    Authors: Shiping Yang, Yixing Ji, Yulin Mo and Tianyu Xia
    Citation: Chinese Journal of Mechanical Engineering 2019 32:71
    Content type: Original Article Published on:

  40. The vibration propagates through the shaft in the form of elastic waves. The propagation characteristics of the elastic waves are affected by the axial loads. The influence of the axial loads to the propagatio...

    Authors: Yimin Wei, Zhiwei Zhao, Wenhua Chen and Qi Liu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:70
    Content type: Original Article Published on:

  41. Disposable blood collection needles become severely intertwined and hooked during stacking, and thus individually feeding disposable blood collection needles during mechanical packaging is difficult. Based on ...

    Authors: Junhua Tong, Yingpeng Zhu, Leiying He, Chuanyu Wu and Peilin Cheng
    Citation: Chinese Journal of Mechanical Engineering 2019 32:69
    Content type: Original Article Published on:

  42. Grinding burn monitoring is of great importance to guarantee the surface integrity of the workpiece. Existing methods monitor overall signal variation. However, the signals produced by metal burn are always we...

    Authors: Zheyu Gao, Jing Lin, Xiufeng Wang and Yuhe Liao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:68
    Content type: Original Article Published on:

  43. Resilient wheels are extensively used in urban rail transit, especially for tramway systems, owing to its advantages in noise reduction. A new type of resilient wheel for a metro is designed, and its character...

    Authors: Xin Zhou, Jian Han, Yue Zhao, Bing Wu, Gong Cheng, Shenghui Xu and Xuesong Jin
    Citation: Chinese Journal of Mechanical Engineering 2019 32:67
    Content type: Original Article Published on:

  44. Current studies of a seawater axial piston pump mainly solve the problems of corrosion and wear in a slipper pair by selecting materials with corrosion resistance, self-lubrication, and wear resistance. In add...

    Authors: Yingna Liang, Dianrong Gao, Bo Chen and Jianhua Zhao
    Citation: Chinese Journal of Mechanical Engineering 2019 32:66
    Content type: Original Article Published on:

  45. The unstable flow phenomena in compressors, such as stall and surge, are closely related to the efficiency and the operating region. It is indispensable to capture the unstable flow structure in compressors an...

    Authors: Xiang Xue and Tong Wang
    Citation: Chinese Journal of Mechanical Engineering 2019 32:65
    Content type: Original Article Published on:

  46. Vehicle rollover, and its resulting fatalities, is an actively researched topic especially for multi-axle vehicles in the field of vehicle dynamics and control. This paper first presents a new rollover index f...

    Authors: Zhilin Jin, Jingxuan Li, Yanjun Huang and Amir Khajepour
    Citation: Chinese Journal of Mechanical Engineering 2019 32:64
    Content type: Original Article Published on:

  47. Non-contact actuated microbeads have attracted a lot of attention in recent years because of its enormous potential in medical, biological, and industrial applications. Researchers have proposed a multitude of...

    Authors: Xiaolong Jing and Weizhong Guo
    Citation: Chinese Journal of Mechanical Engineering 2019 32:63
    Content type: Original Article Published on:

  48. Due to the influence of material characteristics and winding power, single output electromagnet has limited ability to improve the dynamic characteristic of electro-hydraulic valve. Therefore, an electromechan...

    Authors: Xuping Wang, Long Quan, Shiyi Luan and Xiaoqing Xu
    Citation: Chinese Journal of Mechanical Engineering 2019 32:62
    Content type: Original Article Published on:

  49. Currently, lithium–sulfur batteries suffer from several critical limitations that hinder their practical application, such as the large volumetric expansion of electrode, poor conductivity and lower sulfur uti...

    Authors: Xinyu Shan, Zuoxing Guo, Xu Zhang, Jie Yang and Lianfeng Duan
    Citation: Chinese Journal of Mechanical Engineering 2019 32:60
    Content type: Original Article Published on:

  50. Noise is one of the key issues in the operation of high-speed railways, with sound source localisation and its transfer path as the two major aspects. This study investigates both the exterior and interior sou...

    Authors: Jie Zhang, Xinbiao Xiao, Xiaozhen Sheng and Zhihui Li
    Citation: Chinese Journal of Mechanical Engineering 2019 32:59
    Content type: Original Article Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)