Skip to main content
Chinese Journal of Mechanical Engineering
Chinese Journal of Mechanical Engineering Cover Image

Articles

Page 1 of 18

  1. Because of significantly changed load and complex and variable driving road conditions of commercial vehicles, pneumatic suspension with lower natural frequencies is widely used in commercial vehicle suspensio...

    Authors: Xinwei Jiang, Xing Xu, Tianling Shi and Vincent Akolbire Atindana
    Citation: Chinese Journal of Mechanical Engineering 2024 37:58
    Content type: Original Article Published on:

  2. Automation advancements prompts the extensive integration of collaborative robot (cobot) across a range of industries. Compared to the commonly used design approach of increasing the payload-to-weight ratio of...

    Authors: Peng Li, Zhenguo Nie, Zihao Li and Xinjun Liu
    Citation: Chinese Journal of Mechanical Engineering 2024 37:57
    Content type: Original Article Published on:

  3. Effective fault diagnosis and fault-tolerant control method for aeronautics electromechanical actuator is concerned in this paper. By borrowing the advantages of model-driven and data-driven methods, a fault t...

    Authors: Jian Hu, Zhengyin Yang and Jianyong Yao
    Citation: Chinese Journal of Mechanical Engineering 2024 37:56
    Content type: Original Article Published on:

  4. This paper presents a topology optimization approach for the surface flows on variable design domains. Via this approach, the matching between the pattern of a surface flow and the 2-manifold used to define th...

    Authors: Yongbo Deng, Weihong Zhang, Jihong Zhu, Yingjie Xu and Jan G Korvink
    Citation: Chinese Journal of Mechanical Engineering 2024 37:55
    Content type: Original Article Published on:

  5. Low damping characteristics have always been a key sticking points in the development of gas bearings. The application of squeeze film dampers can significantly improve the damping performance of gas lubricate...

    Authors: Jianwei Wang, Haoxi Zhang, Shaocun Han, Hang Li, Peng Wang and Kai Feng
    Citation: Chinese Journal of Mechanical Engineering 2024 37:54
    Content type: Original Article Published on:

  8. Textured surfaces with certain micro/nano structures have been proven to possess some advanced functions, such as reducing friction, improving wear and increasing wettability. Accurate prediction of micro/nano...

    Authors: Chenbing Ni, Junjie Zhu, Youqiang Wang, Dejian Liu, Xuezhao Wang and Lida Zhu
    Citation: Chinese Journal of Mechanical Engineering 2024 37:51
    Content type: Original Article Published on:

  9. This paper aims to develop an automatic miscalibration detection and correction framework to maintain accurate calibration of LiDAR and camera for autonomous vehicle after the sensor drift. First, a monitoring...

    Authors: Pai Peng, Dawei Pi, Guodong Yin, Yan Wang, Liwei Xu and Jiwei Feng
    Citation: Chinese Journal of Mechanical Engineering 2024 37:50
    Content type: Original Article Published on:

  10. Fine particulate matter produced during the rapid industrialization over the past decades can cause significant harm to human health. Twin-fluid atomization technology is an effective means of controlling fine...

    Authors: Wenying Li, Yanying Li, Yingjie Lu, Jinhuan Xu, Bo Chen, Li Zhang and Yanbiao Li
    Citation: Chinese Journal of Mechanical Engineering 2024 37:49
    Content type: Original Article Published on:

  11. Proton exchange membrane fuel cell (PEMFC) is of paramount significance to the development of clean energy. The components of PEMFC are assembled using many pairs of nuts and bolts. The assembly champing bolt ...

    Authors: Tongze Su, Jiaran Liu, Yanqiang Wei, Yihuizi Li, Weichao Luo and Jinzhu Tan
    Citation: Chinese Journal of Mechanical Engineering 2024 37:48
    Content type: Original Article Published on:

  12. Machine tools, often referred to as the “mother machines” of the manufacturing industry, are crucial in developing smart manufacturing and are increasingly becoming more intelligent. Digital twin technology ca...

    Authors: Lei Zhang, Jianhua Liu and Cunbo Zhuang
    Citation: Chinese Journal of Mechanical Engineering 2024 37:47
    Content type: Review Published on:

  13. Laser tracers are a three-dimensional coordinate measurement system that are widely used in industrial measurement. We propose a geometric error identification method based on multi-station synchronization las...

    Authors: Jun Zha and Huijie Zhang
    Citation: Chinese Journal of Mechanical Engineering 2024 37:46
    Content type: Original Article Published on:

  14. There is no unified planning standard for unstructured roads, and the morphological structures of these roads are complex and varied. It is important to maintain a balance between accuracy and speed for unstru...

    Authors: Di Zhang, Qichao An, Xiaoxue Feng, Ronghua Liu, Jun Han and Feng Pan
    Citation: Chinese Journal of Mechanical Engineering 2024 37:45
    Content type: Original Article Published on:

  15. Fibre reinforced polymer composites have become a new generation of structural materials due to their unique advantages such as high specific strength, designability, good dimensional stability and ease of lar...

    Authors: Yanpeng Wei, Jiale Zhao, Jian Zhuang, Peng Zhang and Zhiwu Han
    Citation: Chinese Journal of Mechanical Engineering 2024 37:44
    Content type: Original Article Published on:

  16. The new energy vehicle plays a crucial role in green transportation, and the energy management strategy of hybrid power systems is essential for ensuring energy-efficient driving. This paper presents a state-o...

    Authors: Xiaolin Tang, Jiaxin Chen, Yechen Qin, Teng Liu, Kai Yang, Amir Khajepour and Shen Li
    Citation: Chinese Journal of Mechanical Engineering 2024 37:43
    Content type: Review Published on:

  17. Fuel consumption is one of the main concerns for heavy-duty trucks. Predictive cruise control (PCC) provides an intriguing opportunity to reduce fuel consumption by using the upcoming road information. In this...

    Authors: Hongqing Chu, Xiaoxiang Na, Huan Liu, Yuhai Wang, Zhuo Yang, Lin Zhang and Hong Chen
    Citation: Chinese Journal of Mechanical Engineering 2024 37:42
    Content type: Original Article Published on:

  18. The co-frequency vibration fault is one of the common faults in the operation of rotating equipment, and realizing the real-time diagnosis of the co-frequency vibration fault is of great significance for monit...

    Authors: Xin Pan, Xiancheng Zhang, Zhinong Jiang and Guangfu Bin
    Citation: Chinese Journal of Mechanical Engineering 2024 37:41
    Content type: Original Article Published on:

  19. A novel double side friction stir Z shape lap-butt welding (DS-FSZW) process was proposed to achieve excellent mechanical properties of Al/Cu medium-thick dissimilar joints. The influence of welding parameters...

    Authors: Jiuxing Tang, Guoxin Dai, Lei Shi, Chuansong Wu, Sergey Mironov, Surendra Kumar Patel, Song Gao and Mingxiao Wu
    Citation: Chinese Journal of Mechanical Engineering 2024 37:40
    Content type: Original Article Published on:

  20. A flexible or planar eddy current probe with a differential structure can suppress the lift-off noise during the inspection of defects. However, the extent of the lift-off effect on differential probes, includ...

    Authors: Guolong Chen, Zheng Cao, Shuaishuai Zhang, Ji Wei, Wei Gao and Wuyin Jin
    Citation: Chinese Journal of Mechanical Engineering 2024 37:39
    Content type: Original Article Published on:

  21. The accurate estimation of parameters is the premise for establishing a high-fidelity simulation model of a valve-controlled cylinder system. Bench test data are easily obtained, but it is challenging to emula...

    Authors: Deying Su, Shaojie Wang, Haojing Lin, Xiaosong Xia, Yubing Xu and Liang Hou
    Citation: Chinese Journal of Mechanical Engineering 2024 37:38
    Content type: Original Article Published on:

  22. The lower limb exoskeletons are used to assist wearers in various scenarios such as medical and industrial settings. Complex modeling errors of the exoskeleton in different application scenarios pose challenge...

    Authors: Yibo Han, Hongtao Ma, Yapeng Wang, Di Shi, Yanggang Feng, Xianzhong Li, Yanjun Shi, Xilun Ding and Wuxiang Zhang
    Citation: Chinese Journal of Mechanical Engineering 2024 37:37
    Content type: Original Article Published on:

  23. Battery remaining charging time (RCT) prediction can facilitate charging management and alleviate mileage anxiety for electric vehicles (EVs). Also, it is of great significance to improve EV users' experience....

    Authors: Rui Xiong, Zian Zhao, Cheng Chen, Xinggang Li and Weixiang Shen
    Citation: Chinese Journal of Mechanical Engineering 2024 37:36
    Content type: Original Article Published on:

  24. In the railway system, fasteners have the functions of damping, maintaining the track distance, and adjusting the track level. Therefore, routine maintenance and inspection of fasteners are important to ensure...

    Authors: Yuanhang Wang, Duxin Liu, Sheng Guo, Yifan Wu, Jing Liu, Wei Li and Hongjie Wang
    Citation: Chinese Journal of Mechanical Engineering 2024 37:35
    Content type: Original Article Published on:

  25. Inconel 718 (IN718) alloy is widely applied to fabricate high temperature resistant or corrosion resistant parts due to its excellent mechanical performance. However, the machining of IN718 alloy is difficult ...

    Authors: Hao Liu, Huili Han, Qinghong Jiang, Minglin He and Bi Zhang
    Citation: Chinese Journal of Mechanical Engineering 2024 37:34
    Content type: Original Article Published on:

  27. Existing mobile robots mostly use graph search algorithms for path planning, which suffer from relatively low planning efficiency owing to high redundancy and large computational complexity. Due to the limitat...

    Authors: Yong Tao, Lian Duan, He Gao, Yufan Zhang, Yian Song and Tianmiao Wang
    Citation: Chinese Journal of Mechanical Engineering 2024 37:32
    Content type: Original Article Published on:

  28. The all-wheel drive (AWD) hybrid system is a research focus on high-performance new energy vehicles that can meet the demands of dynamic performance and passing ability. Simultaneous optimization of the power ...

    Authors: Lipeng Zhang, Zijian Wang, Liandong Wang and Changan Ren
    Citation: Chinese Journal of Mechanical Engineering 2024 37:31
    Content type: Original Article Published on:

  30. The most widely adopted method for diagnosing respiratory infectious diseases is to conduct polymerase chain reaction (PCR) assays on patients’ respiratory specimens, which are collected through either nasal o...

    Authors: Yafeng Cui, Wenjie Yu, Jingjing Li, Qi Shao, Ding Weng, Guoping Yin, Xiaohao Zhang, Xinjun Liu, Jingying Ye, Jiadao Wang and Huichan Zhao
    Citation: Chinese Journal of Mechanical Engineering 2024 37:29
    Content type: Original Article Published on:

  31. Copper particles emitted from braking have become a significant source of environmental pollution. However, copper plays a crucial role in resin-based braking materials. Developing high-performance braking mat...

    Authors: Kaikui Zheng, Youxi Lin, Shanmin You, Zhiying Ren and Jianmeng Huang
    Citation: Chinese Journal of Mechanical Engineering 2024 37:28
    Content type: Original Article Published on:

  32. Each joint of a hydraulic-driven legged robot adopts a highly integrated hydraulic drive unit (HDU), which features a high power–weight ratio. However, most HDUs are throttling-valve-controlled cylinder system...

    Authors: Kaixian Ba, Yuan Wang, Xiaolong He, Chunyu Wang, Bin Yu, Yaliang Liu and Xiangdong Kong
    Citation: Chinese Journal of Mechanical Engineering 2024 37:27
    Content type: Original Article Published on:

  33. Exoskeletons generally require accurate dynamic models to design the model-based controller conveniently under the human-robot interaction condition. However, due to unknown model parameters such as the mass, ...

    Authors: Yan Shi, Jiange Kou, Zhenlei Chen, Yixuan Wang and Qing Guo
    Citation: Chinese Journal of Mechanical Engineering 2024 37:26
    Content type: Original Article Published on:

  34. Minimum quantity Lubrication (MQL) is a sustainable lubrication system that is famous in many machining systems. It involve the spray of an infinitesimal amount of mist-like lubricants during machining process...

    Authors: Yusuf Suleiman Dambatta, Changhe Li, Mohd Sayuti, Ahmed A D Sarhan, Min Yang, Benkai Li, Anxue Chu, Mingzheng Liu, Yanbin Zhang, Zafar Said and Zongming Zhou
    Citation: Chinese Journal of Mechanical Engineering 2024 37:25
    Content type: Original Article Published on:

  35. The kinematic equivalent model of an existing ankle-rehabilitation robot is inconsistent with the anatomical structure of the human ankle, which influences the rehabilitation effect. Therefore, this study equa...

    Authors: Jianjun Zhang, Shuai Yang, Chenglei Liu, Xiaohui Wang and Shijie Guo
    Citation: Chinese Journal of Mechanical Engineering 2024 37:24
    Content type: Original Article Published on:

  36. Grinding, a critical precision machining process for difficult-to-cut alloys, has undergone continual technological advancements to improve machining efficiency. However, the sustainability of this process is ...

    Authors: Ning Qian, Jiajia Chen, Aqib Mashood Khan, Biao Zhao, Yurong Chen, Wenfeng Ding, Yucan Fu and Jiuhua Xu
    Citation: Chinese Journal of Mechanical Engineering 2024 37:23
    Content type: Review Published on:

  37. Improvement of fabrication efficiency and part performance was the main challenge for the large-scale powder bed fusion (PBF) process. In this study, a dynamic monitoring and feedback system of powder bed temp...

    Authors: Xiaokang Huang, Xiaoyong Tian, Qi Zhong, Shunwen He, Cunbao Huo, Yi Cao, Zhiqiang Tong and Dichen Li
    Citation: Chinese Journal of Mechanical Engineering 2024 37:22
    Content type: Original Article Published on:

  38. The current parallel ankle rehabilitation robot (ARR) suffers from the problem of difficult real-time alignment of the human-robot joint center of rotation, which may lead to secondary injuries to the patient....

    Authors: Ya Liu, Wenjuan Lu, Dabao Fan, Weijian Tan, Bo Hu and Daxing Zeng
    Citation: Chinese Journal of Mechanical Engineering 2024 37:21
    Content type: Original Article Published on:

  39. This paper presents an integrated control scheme for enhancing the ride comfort and handling performance of a four-wheel-independent-drive electric vehicle through the coordination of active suspension system ...

    Authors: Ze Zhao, Lei Zhang, Xiaoling Ding, Zhiqiang Zhang, Shaohua Li and Liang Gu
    Citation: Chinese Journal of Mechanical Engineering 2024 37:20
    Content type: Original Article Published on:

  40. Regarding the lane keeping system, path tracking accuracy and lateral stability at high speeds need to be taken into account especially for commercial vehicles due to the characteristics of larger mass, longer...

    Authors: Bin Tang, Zhengyi Yang, Haobin Jiang, Ziyan Lin, Zhanxiang Xu and Zitian Hu
    Citation: Chinese Journal of Mechanical Engineering 2024 37:19
    Content type: Original Article Published on:

  41. For dissimilar metal welds (DMWs) involving nickel-based weld metal (WM) and ferritic heat resistant steel base metal (BM) in power plants, there must be an interface between WM and BM, and this interface suff...

    Authors: Xiaogang Li, Junfeng Nie, Xin Wang, Kejian Li and Haiquan Zhang
    Citation: Chinese Journal of Mechanical Engineering 2024 37:18
    Content type: Original Article Published on:

  42. An increasing number of researchers have researched fixture layout optimization for thin-walled part assembly during the past decades. However, few papers systematically review these researches. By analyzing e...

    Authors: Changhui Liu, Jing Wang, Binghai Zhou, Jianbo Yu, Ying Zheng and Jianfeng Liu
    Citation: Chinese Journal of Mechanical Engineering 2024 37:17
    Content type: Review Published on:

  43. Wheel polygonal wear can immensely worsen wheel/rail interactions and vibration performances of the train and track, and ultimately, lead to the shortening of service life of railway components. At present, wh...

    Authors: Yunfan Yang, Feifan Chai, Pengfei Liu, Liang Ling, Kaiyun Wang and Wanming Zhai
    Citation: Chinese Journal of Mechanical Engineering 2024 37:16
    Content type: Original Article Published on:

  44. The current gait planning for legged robots is mostly based on human presets, which cannot match the flexible characteristics of natural mammals. This paper proposes a gait optimization framework for hexapod r...

    Authors: Yunpeng Yin, Feng Gao, Qiao Sun, Yue Zhao and Yuguang Xiao
    Citation: Chinese Journal of Mechanical Engineering 2024 37:15
    Content type: Original Article Published on:

  45. The advancement of autonomous driving heavily relies on the ability to accurate lane lines detection. As deep learning and computer vision technologies evolve, a variety of deep learning-based methods for lane...

    Authors: Yufeng Du, Rongyun Zhang, Peicheng Shi, Linfeng Zhao, Bin Zhang and Yaming Liu
    Citation: Chinese Journal of Mechanical Engineering 2024 37:14
    Content type: Original Article Published on:

  46. Titanium alloys are excellent structural materials in engineering fields, but their poor tribological properties limit their further applications. Electroless plating is an effective method to enhance the trib...

    Authors: Yao Jia, Jianping Lai, Jiaxin Yu, Huimin Qi, Yafeng Zhang and Hongtu He
    Citation: Chinese Journal of Mechanical Engineering 2024 37:13
    Content type: Original Article Published on:

  47. This paper proposes a modified iterative learning control (MILC) periodical feedback-feedforward algorithm to reduce the vibration of a rotor caused by coupled unbalance and parallel misalignment. The control ...

    Authors: Yifan Bao, Jianfei Yao, Fabrizio Scarpa and Yan Li
    Citation: Chinese Journal of Mechanical Engineering 2024 37:12
    Content type: Original Article Published on:

  48. Accurate vehicle dynamic information plays an important role in vehicle driving safety. However, due to the characteristics of high mobility and multiple controllable degrees of freedom of drive-by-wire chassi...

    Authors: Zixu Wang, Chaoning Chen, Quan Jiang, Hongyu Zheng and Chuyo Kaku
    Citation: Chinese Journal of Mechanical Engineering 2024 37:11
    Content type: Original Article Published on:

  49. Four-wheel independently driven electric vehicles (FWID-EV) endow a flexible and scalable control framework to improve vehicle performance. This paper integrates the torque vectoring and active suspension syst...

    Authors: Jiwei Feng, Jinhao Liang, Yanbo Lu, Weichao Zhuang, Dawei Pi, Guodong Yin, Liwei Xu, Pai Peng and Chaobin Zhou
    Citation: Chinese Journal of Mechanical Engineering 2024 37:10
    Content type: Original Article Published on:

  50. The human digital twin (HDT) emerges as a promising human-centric technology in Industry 5.0, but challenges remain in human modeling and simulation. Digital human modeling (DHM) provides solutions for modelin...

    Authors: Qiqi He, Li Li, Dai Li, Tao Peng, Xiangying Zhang, Yincheng Cai, Xujun Zhang and Renzhong Tang
    Citation: Chinese Journal of Mechanical Engineering 2024 37:9
    Content type: REVIEW Published on:
Submit manuscript

Associated Society

CMES-logo
Chinese Journal of Mechanical Engineering is affiliated with the Chinese Mechanical Engineering Society.

Annual Journal Metrics

  • 2022 Citation Impact
    4.2 - 2-year Impact Factor
    3.9 - 5-year Impact Factor
    1.546 - SNIP (Source Normalized Impact per Paper)
    0.744 - SJR (SCImago Journal Rank)

    2023 Speed
    43 days submission to first editorial decision for all manuscripts (Median)
    431 days submission to accept (Median)

    2023 Usage
    814,514 downloads
    17 Altmetric mentions

  • This journal is indexed by

    • Google Scholar
    • EBSCO
    • EI Compendex
    • SCImago
    • SCIE
    • UGC-CARE List (India)
    • Dimensions
    • DOAJ
    • Astrophysics Data System (ADS)
    • ProQuest
    • Chinese Academy of Sciences (CAS) - GoOA
    • Naver
    • CNKI
    • Chinese Science Citation Database
    • OCLC WorldCat Discovery Service
    • Chemical Abstracts Service (CAS)
    • TD Net Discovery Service
    • SCOPUS
    • INSPEC
    • CNPIEC

  • ISSN: 2192-8258 (electronic)
  • ISSN: 1000-9345 (print)